PROJECT EVOLUTION 70 jimmy build - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1956cameo · 10-11-2012, 09:11 PM

Nice work!

**hilljob26** · 10-13-2012, 07:24 AM

its coming along,,goin through the diffs now,,puttin new seals and bearings

**hilljob26** · 10-17-2012, 08:28 PM

getting the transfer case all tore down,,replacing all gaskets and checking all the bearings...those needle bearings are a serious PITA.

**hilljob26** · 10-17-2012, 08:30 PM

found some center caps that cover the lug nuts,,i really dont like looking at lug nuts,,i remembered eagle made some of these caps about 10 years ago,,so i just had to find some,,had to cut the fronts to fit,,but i like the look

**hilljob26** · 10-30-2012, 11:43 PM

finally got the transfer case done and painted,,also got the front bumper brackets blasted and painted,,,still looking for my donor truck for my ls swap

**hilljob26** · 11-09-2012, 05:12 PM

scored this roll bar today..oh yeah...it was FREE

fear_nothing · 11-12-2012, 06:06 PM

Quote:

Originally Posted by hilljob26

found some center caps that cover the lug nuts,,i really dont like looking at lug nuts,,i remembered eagle made some of these caps about 10 years ago,,so i just had to find some,,had to cut the fronts to fit,,but i like the look

Neat trick covering the front hub, I like the nice clean look.

**hilljob26** · 11-16-2012, 10:13 PM

me too,, i really hate looking at lug nuts

fear_nothing · 11-18-2012, 06:55 PM

Quote:

Originally Posted by hilljob26

me too,, i really hate looking at lug nuts

just to be clear.... does the lug nut plate cover the front locking hubs without any issue?

FRENCHBLUE72 · 11-19-2012, 10:39 AM

Chassis is really comming along... Congrats on getting all the rust removed..

**hilljob26** · 11-19-2012, 09:23 PM

Quote:

Originally Posted by fear_nothing

just to be clear.... does the lug nut plate cover the front locking hubs without any issue?

it slides right over the hub,,about an 1/8 of an inch clearance all around it..no issues what so ever

**hilljob26** · 11-19-2012, 09:25 PM

Quote:

Originally Posted by FRENCHBLUE72

Chassis is really comming along... Congrats on getting all the rust removed..

thanx..it would be coming along alot faster if i had a chance to get a doner truck for the engine/tranny,,been workin 14 hr days for awhile now...just aint enough time in the day

deadof_knight · 12-02-2012, 11:18 AM

Thats looking real good your boy should like it alot , with all the work to get it back in shape .

**hilljob26** · 12-13-2012, 03:28 PM

not a whole lot of progress, but got the shocks,front braided stainless steel brake lines and the steering stabilizer on

teeitup · 12-21-2012, 08:58 PM

WOW your doing AWSOME!!!

**hilljob26** · 12-21-2012, 10:14 PM

finally got my donor vehicle..ended up buying a 2001 yukon that was rolled, has 130k on it so it will be just right for this baby. i should have it home on monday then get to takin it apart

**hilljob26** · 12-24-2012, 02:29 PM

finally got the doner truck here 2001 yukon

sduckworth13 · 12-26-2012, 01:39 AM

Your truck looks great, what brand of sandblaster are you using? I'm considering sandblasting and painting my small parts and frame myself to save alot of cash and not to mention paying someone to haul everything back and forth to the sandblaster and paint shop and not scratch anything.

**hilljob26** · 12-26-2012, 01:50 AM

i just bought one from sears for like 60 bucks, and ordered a blasting helmet off ebay for 20 bucks,,i get 50lb bags of blasting media at orschelins for around 10 bucks a bag..as far as my cabinet, it was just one i picked up at harbor freight

sduckworth13 · 12-26-2012, 01:54 AM

So it's definitely worth it to do it myself. I hope the neighbors don't mind a little dust, they've been supportive this far along in my build. Thanks
Posted via Mobile Device

**hilljob26** · 12-26-2012, 02:23 AM

well, the guy in town wanted 250 bucks to sand blast it,,but i would have to haul it,wait,then haul it back...but yeah it was worth it, i saved about half of that i guess

**hilljob26** · 12-28-2012, 10:07 PM

finally got the engine pulled

**hilljob26** · 12-30-2012, 07:49 PM

got 90% of the motor mounts done, still have to get it on the frame, but waiting on getting the spacer for the tranny and transfer case,,but lookin good,,just ended up buying the actual bushing from DIY and fabbed up the rest

hgs_notes · 01-01-2013, 03:21 PM

Looking good.

**hilljob26** · 01-11-2013, 02:59 PM

well, i got the engine all cleaned up,,looks pretty cool

10-11-2012, 09:11 PM	#26
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: PROJECT EVOLUTION 70 jimmy build Nice work! __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

10-13-2012, 07:24 AM	#27
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: PROJECT EVOLUTION 70 jimmy build its coming along,,goin through the diffs now,,puttin new seals and bearings __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

10-17-2012, 08:28 PM	#28
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: PROJECT EVOLUTION 70 jimmy build getting the transfer case all tore down,,replacing all gaskets and checking all the bearings...those needle bearings are a serious PITA. Attached Images __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

10-17-2012, 08:30 PM	#29
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: PROJECT EVOLUTION 70 jimmy build found some center caps that cover the lug nuts,,i really dont like looking at lug nuts,,i remembered eagle made some of these caps about 10 years ago,,so i just had to find some,,had to cut the fronts to fit,,but i like the look Attached Images __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

10-30-2012, 11:43 PM	#30
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: PROJECT EVOLUTION 70 jimmy build finally got the transfer case done and painted,,also got the front bumper brackets blasted and painted,,,still looking for my donor truck for my ls swap Attached Images __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

11-09-2012, 05:12 PM	#31
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: PROJECT EVOLUTION 70 jimmy build scored this roll bar today..oh yeah...it was FREE Attached Images __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

11-16-2012, 10:13 PM	#33
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: PROJECT EVOLUTION 70 jimmy build me too,, i really hate looking at lug nuts __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

11-19-2012, 10:39 AM	#35
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: PROJECT EVOLUTION 70 jimmy build Chassis is really comming along... Congrats on getting all the rust removed.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-02-2012, 11:18 AM	#38
deadof_knight FixerUpper Join Date: Dec 2000 Location: Lawton ,Oklahoma Posts: 102	Re: PROJECT EVOLUTION 70 jimmy build Thats looking real good your boy should like it alot , with all the work to get it back in shape . __________________ 1-Cheyenne 72 700R4,camper special all original when i got it then i improved it a little Blue and White 3.73,4 core rad, 700r4,MSD hei ,turbo muffs dual exhaust only had 50 k on it when i bought original mile sweet old ladies truck turned into a stump puller No. 2 C-10 72 w/air and Tilt and power and the cheyenne trim package shtbd is dropped 2-3w/factory tilt has torq thrust 2 rims 2003 dodge neon steel blue color

12-13-2012, 03:28 PM	#39
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: PROJECT EVOLUTION 70 jimmy build not a whole lot of progress, but got the shocks,front braided stainless steel brake lines and the steering stabilizer on Attached Images __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

12-21-2012, 08:58 PM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: PROJECT EVOLUTION 70 jimmy build WOW your doing AWSOME!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-21-2012, 10:14 PM	#41
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: PROJECT EVOLUTION 70 jimmy build finally got my donor vehicle..ended up buying a 2001 yukon that was rolled, has 130k on it so it will be just right for this baby. i should have it home on monday then get to takin it apart __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343 Last edited by hilljob26; 12-25-2012 at 11:05 PM.

12-24-2012, 02:29 PM	#42
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: PROJECT EVOLUTION 70 jimmy build finally got the doner truck here 2001 yukon Attached Images __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

12-26-2012, 01:39 AM	#43
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: PROJECT EVOLUTION 70 jimmy build Your truck looks great, what brand of sandblaster are you using? I'm considering sandblasting and painting my small parts and frame myself to save alot of cash and not to mention paying someone to haul everything back and forth to the sandblaster and paint shop and not scratch anything. __________________ Scott

12-26-2012, 01:50 AM	#44
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: PROJECT EVOLUTION 70 jimmy build i just bought one from sears for like 60 bucks, and ordered a blasting helmet off ebay for 20 bucks,,i get 50lb bags of blasting media at orschelins for around 10 bucks a bag..as far as my cabinet, it was just one i picked up at harbor freight __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343



Register or Log In To remove these advertisements.

12-26-2012, 01:54 AM	#45
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: PROJECT EVOLUTION 70 jimmy build So it's definitely worth it to do it myself. I hope the neighbors don't mind a little dust, they've been supportive this far along in my build. Thanks Posted via Mobile Device __________________ Scott

12-26-2012, 02:23 AM	#46
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: PROJECT EVOLUTION 70 jimmy build well, the guy in town wanted 250 bucks to sand blast it,,but i would have to haul it,wait,then haul it back...but yeah it was worth it, i saved about half of that i guess __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

12-28-2012, 10:07 PM	#47
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: PROJECT EVOLUTION 70 jimmy build finally got the engine pulled Attached Images __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

12-30-2012, 07:49 PM	#48
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: PROJECT EVOLUTION 70 jimmy build got 90% of the motor mounts done, still have to get it on the frame, but waiting on getting the spacer for the tranny and transfer case,,but lookin good,,just ended up buying the actual bushing from DIY and fabbed up the rest Attached Images __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

01-01-2013, 03:21 PM	#49
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: PROJECT EVOLUTION 70 jimmy build Looking good. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

01-11-2013, 02:59 PM	#50
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: PROJECT EVOLUTION 70 jimmy build well, i got the engine all cleaned up,,looks pretty cool Attached Images __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

Register or Log In To remove these advertisements.