Pictures of different dual exhaust coming out the back.

[bohmankid]

Originally Posted by OutlawDrifter

it looks cool in front of the tires too....just really noisy...i had a 78 ss el camino set up that way, going down a gravel road it sounded like bells ringing from the rocks coming off the front tires. even with the windows up it was noisy, ran it out the back to quiet it down a bit.

Put on a proper muffler and it's not so bad out the side. It does get annoying at times

Originally Posted by C-10 simplex

2 things that i want to bring up that are slightly off topic, yet on topic:

1) When a new exhaust is put in, are the welds done while in place? Or the necessary welds done out of the car, then bolted in place?


2) i don't think NOT running the exhaust out from completely underneath the car is such a good idea for carbon monoxide safety reasons. In other words, stopping it right at the rear axle, right after the headers etc.

number 1) It depends on the person. I mark and tack weld the pieces on the vehicle and pull them off to finish the weld. If I'm in a hurry I do the full thing on the car if the space permits.
number 2) Meh... to each his own.

[bohmankid]

I always thought fastening a Ram bumper on our trucks would be cool for the exhaust.

[GM-power]

@bohmankid, do you have any issues with your fuel getting real hot?
Posted via Mobile Device

[bohmankid]

No issues with the fuel. The tips are not as close to the gas tank as the picture makes it out to be. There's a good 5 inches between there.

[allchevy58]

My 83' and 76'

[spencer_41188]

here some better pics its 2.5" to 3" after the mufflers the H pipe helps tq numbers and it was noticeable

its alot quieter with this truck seeing it has a full interior the red truck was all steel and loud when you romped on it

real easy to make a flame thrower lol with this fast efi all i got to do is make it rich and install spark plugs in the exhaust lol

poor some seafome down the pipes is awsome blows haylows at idle lol

[motornut]

taken off the 78 burb
had to put tails on it ,stinkin loud lol

78 Jimmy 4X4 duals
and
79 Jimmy 4X2 duals & H pipe

[egaray281]

Originally Posted by bohmankid

I always thought fastening a Ram bumper on our trucks would be cool for the exhaust.
Attachment 1023132

i thought of that before i like the way the bumper is molded for the tips

[Pyrotechnic]

[86swb]

Running out in front of the axle looks good but I would have to agree with Redcap on the carbon monoxide safety. Might be ok but I would perfer going out behind the axle. I would rather get the exhaust more away from the cab. MO Getting some good options here.

[85supersierra]

I am recessing my tag into my tailgate and building a billet grille to fill the hole in the bumper were the tag was. I will have dual four in tips coming out the center of the bumper in the billet grille. I am kinda after the corvette or cherokee srt8 look