Boss Motorsports 338's now available

[ibad57]

Originally Posted by ksbrktracer

I dont have any in stock right now , but I can usually get them by the next day.

American Eagle 225 , This is a wheel that is better looking in person than the pictures show .

5on 5 Bolt Pattern

20 X 8.5 / $277.00 ea
20 X 10 / $297.00 ea

+ shpg

im looking for the original 225 series in deep dish for rear if you can price 18" and 20"dia. eather 9.5 or 10" wide please post pic of these wheels i have been looking for a while thanks

[ibad57]

I have 8.5 wide looking formatching in wide eather 18" or 20" with 5 on 5

[paintpyro]

Posted via Mobile Device

[ksbrktracer]

Originally Posted by ibad57

I have 8.5 wide looking formatching in wide eather 18" or 20" with 5 on 5

I dont have pictures but I can get an 18X10 wheel with 5.00 Backspace , they would be about $295.00 each + frt. That would be the deepest wheel I can get. , the 20X10 has 5.5 bs which would be less dish .

Also the first picture you have is a 212 wheel which has been discontinued

[Big Block 454]

Originally Posted by Big Block 454

Thanks Tommy. They're Nexen Roadian HP front and rear. I spent hours comparing diameters widths and sidewall height but I guess I didn't consider the front rims were 2 inches narrower so they have the bulge in the sidewall and the rears don't. I think a 245/55/18 would cure that without going through the expense of switching to 20s in front?

ok, thx

[67 Chevy PU]

Need a price on 18x8 and 20x10 gray's shipped to 67101 and lug nuts. Thanks

[ksbrktracer]

Originally Posted by 67 Chevy PU

Need a price on 18x8 and 20x10 gray's shipped to 67101 and lug nuts. Thanks

PM with pricing sent.

[04 orange]

Originally Posted by ksbrktracer

The 20X8.5 would be 5.158 bs and would run $196.00 ea
The 22X9 would be 5.75 bs and would run $243.00 ea
You are looking at about $25-$28 per wheel , the 22X9's would take about 2 weeks to get as they would come from California warehouse, 20's I could have next day.
Chrome is all that is available right now in 5on5 also .

Tommy can you still do the 22" boss 335's in chrome???

[ksbrktracer]

Originally Posted by 04 orange

tommy can you still do the 22" boss 335's in chrome???

shouldnt be a problem, just need to verify pricing again.

[04 orange]

ok cool, ill call ya up tomorrow, thanks!!

[broey]

price for a set of chrome smoothies 15x8 5 on 4.75 and bullets if you have them?

[ksbrktracer]

Originally Posted by broey

price for a set of chrome smoothies 15x8 5 on 4.75 and bullets if you have them?

as in baby moons .....? PICTURES MAYBE .....? I HAVE SOME STUFF AVAILABLE

[lifted k10]

Does the revison 3 338 wheels with smooth lip come is either matte black or satin black. What will a 20/22 combo cost revison 3 338 shipped to CT.

[ksbrktracer]

Originally Posted by lifted k10

Does the revison 3 338 wheels with smooth lip come is either matte black or satin black. What will a 20/22 combo cost revison 3 338 shipped to CT.

I would need a complete address to get you a shipping quote, but usually around $25-30.00 a wheel . I will say no more than $30.00 for sure tho.

[ksbrktracer]

Originally Posted by 04 orange

ok cool, ill call ya up tomorrow, thanks!!

Your 22X9's shipped today and it said you would be getting them tomorrow ...Keep an eye open for them. And thanks again. Super cool looking wheel

[lifted k10]

Originally Posted by ksbrktracer

I would need a complete address to get you a shipping quote, but usually around $25-30.00 a wheel . I will say no more than $30.00 for sure tho.

Pm'ed you for details
Posted via Mobile Device

[ksbrktracer]

Originally Posted by lifted k10

Pm'ed you for details
Posted via Mobile Device

I never got a PM..... Might try again or give me a call , 918-845-1935

[C10_ustacould]

May I have a quote for 20 x 8.5 338s in grey shipped to 32578?

[ksbrktracer]

Originally Posted by BucksSS

May I have a quote for 20 x 8.5 338s in grey shipped to 32578?

Can I have your full address ..... Cant be accurate on shipping without. PM it if you want.

[ksbrktracer]

Still got 338's in stock...... Who needs some.......!

[ksbrktracer]

I have Black and Machined 338's in 18X8 in stock and ready for immediate shipment . I also have Matte Black 338's in 22X9.5 in stock and ready for immediate shipment. I can usually have Gray and Machined or Polished overnight. I have 1/2'' Chrome accorn lugs in stock also.



WHENEVER REQUESTING A PRICE QUOTE PLEASE INCLUDE COMPLETE ADDRESS AND WETHER IT IS A BUSINESS OR RESIDENCE TO GET AN ACCURATE SHIPPING QUOTE

[BugzC10]

Sent you a PM for pricing

[ksbrktracer]

Originally Posted by BugzC10

Sent you a PM for pricing

PM sent back

[ksbrktracer]

Originally Posted by ksbrktracer

I have Black and Machined 338's in 18X8 in stock and ready for immediate shipment . I also have Matte Black 338's in 22X9.5 in stock and ready for immediate shipment. I can usually have Gray and Machined or Polished overnight. I have 1/2'' Chrome accorn lugs in stock also.



WHENEVER REQUESTING A PRICE QUOTE PLEASE INCLUDE COMPLETE ADDRESS AND WETHER IT IS A BUSINESS OR RESIDENCE TO GET AN ACCURATE SHIPPING QUOTE

Matte black 22X9.5's sold but I can get more.

[ulises milanez]

pricing for 20/8.5 and 20/10 for 1986 silverado 1/2 ton 2wd