IL Part out long bed frame, any parts ?

[BIGJAKE97]

yes, that's the panhard bar mount. i guess cut the frame as close as you can to the mount without cutting the mount and i'll take out the rivits later. maybe it will fit in a small flat rate box? thanks, jake

[Propane350]

I know the title just says frame, but is there any chance you've got a body you're scrapping too? I'm having a hellufa time finding an inner roof skin.

[steinepstein]

Originally Posted by BIGJAKE97

yes, that's the panhard bar mount. i guess cut the frame as close as you can to the mount without cutting the mount and i'll take out the rivits later. maybe it will fit in a small flat rate box? thanks, jake

No problem, I'll get it this weekend and should be able to ship early next week.

Originally Posted by Propane350

I know the title just says frame, but is there any chance you've got a body you're scrapping too? I'm having a hellufa time finding an inner roof skin.

I have the replacement panel which is the front part of the inner roof where the sun visors are located, I was going to list it separately...is that what you are looking for?

[steinepstein]

Originally Posted by BIGJAKE97

yes, that's the panhard bar mount. i guess cut the frame as close as you can to the mount without cutting the mount and i'll take out the rivits later. maybe it will fit in a small flat rate box? thanks, jake

Jake, I attached two pictures of the panhard mount cut out. There are several plates around it, do you want those also..so just cut as much of the frame out as possible, or I can just ship as is..? Also, in the close up pic it looks like the rivet in the middle of the picture went through the steel a bit, I don't know if that is factory or not...Everything looks fine, just pointing it out.

[steinepstein]

Originally Posted by S3B3AST

I would like to get the front driver side frame rail, need from where bumper mounts mount to where the steering box mounts. Let me know shipping to 95307 CA please.
Thank you, JD
Posted via Mobile Device

Front piece is out.

Originally Posted by scud44

Center link?
Posted via Mobile Device

Center link is out.

[S3B3AST]

Thank you, that looks great I only need to the inside of the cross member, just in front of where that little bracket on the top is. Seriously helps me out so much in getting the project moving again. Let me know on shipping and best way to pay you can't wait.
JD
Posted via Mobile Device

[BIGJAKE97]

i don't need the extra plates, but whatever is easier or cheaper to ship. one of the rivits is countersunk, i believe. the rivits go through two to three pieces of steel they're really tough to get out, i'll do the work on that. the mount looks fine to me. could you cut the access of the frame off to make it lighter and smaller to ship? like where the frame would turn up 90 degrees, which would be the side of the frame and crossmember, if you know what i mean?

[steinepstein]

Originally Posted by S3B3AST

Thank you, that looks great I only need to the inside of the cross member, just in front of where that little bracket on the top is. Seriously helps me out so much in getting the project moving again. Let me know on shipping and best way to pay you can't wait.
JD
Posted via Mobile Device

Cool, I'll work on getting it out this weekend.

Originally Posted by BIGJAKE97

i don't need the extra plates, but whatever is easier or cheaper to ship. one of the rivits is countersunk, i believe. the rivits go through two to three pieces of steel they're really tough to get out, i'll do the work on that. the mount looks fine to me. could you cut the access of the frame off to make it lighter and smaller to ship? like where the frame would turn up 90 degrees, which would be the side of the frame and crossmember, if you know what i mean?

I'll trim it up...

Thanks,
Jon

[BIGJAKE97]

ok. let me know how much i owe you. thanks, jake

[steinepstein]

sorry, I'll get it done this week.

Jon

[69SCSS]

Do you have the driver's side core support mount left? Mine's pretty tweaked but usable, but i'd rather have a straight one. Lemme know what you would want for it.

Thanks,
Al

[72blazerblue]

I need both rear frame horns, about the last 6 inches. Post a pic if you don't mind, I would gladly take them! Thanks!

[S3B3AST]

Hello Jon,
How have you been? Don't mean to bug but how is it going on the shipping out of the frame rail? My zip code is 95307, let me know. Hope to hear back soon.
JD
Posted via Mobile Device

[BIGJAKE97]

on the panhard bar bracket, you could put it in a usps medium flat rate box. it's $12.35. if that makes it any easier. i believe you can pay and print a label online and drop if off at a post office when ever you like. thanks, jake

[steinepstein]

Haha, I appreciate the patience....

My shop is kind of far, I've had trouble getting down there and focusing on them. I should be able to get down there this weekend and trim up the parts.

I'll reply again by Sunday.

Jon

[jflem_also]

do you have the fron suspension A - arms?

[steinepstein]

Originally Posted by steinepstein

Haha, I appreciate the patience....

My shop is kind of far, I've had trouble getting down there and focusing on them. I should be able to get down there this weekend and trim up the parts.

I'll reply again by Sunday.

I'm headed down tomorrow, this will be the first thing I do!

Thanks.

Jon

Originally Posted by jflem_also

do you have the fron suspension A - arms?

Yes, I have 2 sets, what do you wanna pay for them?

[steinepstein]

Originally Posted by S3B3AST

Hello Jon,
How have you been? Don't mean to bug but how is it going on the shipping out of the frame rail? My zip code is 95307, let me know. Hope to hear back soon.
JD
Posted via Mobile Device

I have it cut out and in my trunk and have a box for it, I'll get you the quote this week.

Originally Posted by BIGJAKE97

on the panhard bar bracket, you could put it in a usps medium flat rate box. it's $12.35. if that makes it any easier. i believe you can pay and print a label online and drop if off at a post office when ever you like. thanks, jake

I have it cut out and in my trunk, I'll see if it fits in that box and let you know.

[BIGJAKE97]

i got the bracket today. thanks, jake

[jflem_also]

forgot to ask are these C-20 A arms?if so hadn't really thought to much on prices, I know shipping is going to be the biggest cost

[cffisher]

trailing arms? Or are they gone?

[S3B3AST]

I got someone else part, think its a center link. Scud44?
Posted via Mobile Device

[steinepstein]

My god...what a train wreck...I f'd that all up....unreal. What do you think we should do from here...get a hold of scud?