TX Parting out 84 SWB from the bed forward...

[tex_waco_usmc]

Originally Posted by Bloodyjaws88

Simper fi. Yes a chevy cap. It doesn't need to be perfect, just decent. I also need the screws to hold it to the wheel if you have them. I have 3 on a 72 parts truck I just bought. Thanks again, Chris
Posted via Mobile Device

Originally Posted by 48cj2a

SOLD - Do you do Paypal?

PM's sent to both of y'all!
Posted via Mobile Device

[brb90zc]

Can you get me a shot of the throttle pedal( inside) and the throttle cable ( engine bay) and then price it shipped to 28127. Thanks a lot
Posted via Mobile Device

[tex_waco_usmc]

Originally Posted by brb90zc

Can you get me a shot of the throttle pedal( inside) and the throttle cable ( engine bay) and then price it shipped to 28127. Thanks a lot
Posted via Mobile Device

Yes I will get those to you tomorrow.
Posted via Mobile Device

[tex_waco_usmc]

Originally Posted by brb90zc

Can you get me a shot of the throttle pedal( inside) and the throttle cable ( engine bay) and then price it shipped to 28127. Thanks a lot
Posted via Mobile Device

The pedal is in good shape but the cable not so much. The plastic clip at the firewall is broken on the cable. If you are interested in the pedal let me know.

[brb90zc]

What will you need out of it (the bracket, pedal, screws, and all) shipped to 28127
Posted via Mobile Device

[madcow75]

If you are going to scrape the doors i am looking for a doorstop out of a passenger side door if you are willing to cut them up. I am not sure why but mine is missing in my passenger side door. Thanks.

[tex_waco_usmc]

Originally Posted by brb90zc

What will you need out of it (the bracket, pedal, screws, and all) shipped to 28127
Posted via Mobile Device

$10 + shipping sound good to you?

[tex_waco_usmc]

Originally Posted by Bloodyjaws88

Hi. Ill take the $10 cap. I think it will suite my purpose just fine. Would it be ok to send payment Friday? That will give time to get exact amount. Thanks, Chris
Posted via Mobile Device

PM sent

[tex_waco_usmc]

Originally Posted by madcow75

If you are going to scrape the doors i am looking for a doorstop out of a passenger side door if you are willing to cut them up. I am not sure why but mine is missing in my passenger side door. Thanks.

Send me a pic of what you need, if no one buys the doors or the cab then I will cut it out for you before I scrap it...

[48cj2a]

Originally Posted by tex_waco_usmc

I took a closer look and it is in really good shape. No cracks or anything.

It would be $21 shipped to you.

Pics:

Attachment 1082784

Attachment 1082785

Got the Horn Button over the weekend - its even better looking than I thought it would be.

thanks!!!

[tex_waco_usmc]

Originally Posted by 48cj2a

Got the Horn Button over the weekend - its even better looking than I thought it would be.

thanks!!!

After I did the quick clean to make sure there wasnt anything wrong with it for you, I was impressed at the shape it was in! Glad I could help! I would have kept it but my trucks are all running 4 eyes and have the GMC logo! LOL

[tex_waco_usmc]

Ttt.... About another week or so and the rest is going to scrap... Let me know what you need from this rig!!!
Posted via Mobile Device

[mainermikeyd]

Any word on the cab wiring harness??
Posted via Mobile Device

[tex_waco_usmc]

Originally Posted by mainermikeyd

Any word on the cab wiring harness??
Posted via Mobile Device

I tried sending you a PM but it kept erroring out...

When you say you want the entire cab harness, you mean from door to door including fuse block and the wires that go down and to the fuel tanks? OR just the part of the harness for the tanks? Sorry was a little confused...

The interior harness looked good when I was under the dash pulling the steering column. As far as under the cab, havent been under there but I would expect it to be in good shape as has been the case for the rest of the harness that I have looked at.

I got sent to Iowa on a last minute work trip, I will be home on Sunday and can most likely take a look at it then to verify the tank harness is still in good shape.

The only part of the wiring harness on the truck that I have found that wasnt in good shape so far was the connectors for the headlights, but those can be replaced at any parts store for a couple bucks...

[tex_waco_usmc]

Complete Harness is pending to MainerMikeyD...

Let me know what else you guys need/want before the remains end up in the scrap yard...

[tex_waco_usmc]

Gentleman, get it before it gets crushed...

Cab is gutted for anything worth saving and unbolted and about to be flipped onto my trailer for crushing...

Then I am going to pull the front crossmember and load it on the trailer as well...

Once it is all loaded it is going to scrap so get it before it goes to scrap... Let me know what you need.

[Low84]

How's the cab itself?

[Space Monkey]

Manual window cranks and regulators?
Driver's side tank sending unit?
Cargo light?
Still got the steering wheel?

[tex_waco_usmc]

Originally Posted by Low84

How's the cab itself?

Overall the cab is in good shape. The only spot that is questionable is in the top of the door frame on the drivers side on the A-Pillar. There is a spot of rust on there about the size of a quarter. I can get you a pic if you would like.

[tex_waco_usmc]

Originally Posted by Space Monkey

Manual window cranks and regulators?
Driver's side tank sending unit?
Cargo light?
Still got the steering wheel?

This truck was power windows and locks.
I have the sending unit in the drivers side tank, it appears to be in good shape. $20 + shipping
No Cargo light.
Steering wheel is in good shape needs to be cleaned. $20 + shipping

Let me know.

[mgold97]

what trans you have in there(turbo 350)? Will you sell a driveshaft?

[tex_waco_usmc]

Originally Posted by mgold97

what trans you have in there(turbo 350)? Will you sell a driveshaft?

Not sure what it had in it but I'm using the driveshaft. I do have a th400 for sale if your interested.
Posted via Mobile Device

[DirtRocket8x]

Gas tanks?
Posted via Mobile Device

[tex_waco_usmc]

Originally Posted by DirtRocket8x

Gas tanks?
Posted via Mobile Device

Ive got one right now, it came off the drivers side (passengers side was missing). It had about 2 gallons worth of bad gas in it when I dropped it. I need the mounting hardware and the sending unit is already spoken for. But, if you are looking for just the tank itself this one should work for you.

I will have another complete tank and a sending unit and mounting hardware for this tank in a few more day as the 86 I am using the cab and front clip off of will be in the shop and it has one good tank and one tank with a hole in it but the sending unit and mounting hardware is good. I am sure we can work something out. Hard part is shipping a used tank. PM me if you are interested.

[Aaron_L]

Sent you a PM.