KS Getting ready for swap meet in Lawrence so here are some parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ol Blue K20** · 04-18-2013, 01:36 PM

Quote:

Originally Posted by Ol Blue K20

The 4x4 front spring perch is it the pass. side and is it 3/4 ton if it makes a difference. I will take if it is pass and fits 3/4ton

Also need the total shipped to 95687

sduckworth13 · 04-18-2013, 01:44 PM

Ok, thanks Randy. I'll probably make it out on Saturday.
Posted via Mobile Device

Bueno 68C-10 · 04-18-2013, 07:02 PM

Quote:

Originally Posted by Bueno 68C-10

Hey one last question what kind of condition are the headers in, are they dented, running thin on the wall, ect.

Thanks,
Hayden

I would also like to make sure these headers will fit my 68 c-10 with my 327 in it, and i don't mean to be ignorant or annoying but does it matter what size the out let on the headers are.

Thanks a ton,
Hayden

teeitup · 04-18-2013, 07:08 PM

David, that will work

Hayden, they are not dinged up, don't seem to be thin walled. I'm pretty sure they will fit a 327

ol Blue K20, I'll have to check which side it is, it came off a 1/2 4x4

Scott, I'll be there till 1 or 2 on Sat

Thanks Randy

**Ol Blue K20** · 04-18-2013, 07:43 PM

Quote:

Originally Posted by teeitup

David, that will work

Hayden, they are not dinged up, don't seem to be thin walled. I'm pretty sure they will fit a 327

ol Blue K20, I'll have to check which side it is, it came off a 1/2 4x4

Scott, I'll be there till 1 or 2 on Sat

Thanks Randy

teeitup, sounds good, just let me know and send me total and payment info. I think I can make it work because it's the rad support bracket thats bent so between mine and it I should get it. Thanks, Dale

SLOW POKE · 04-19-2013, 06:32 AM

How much would the 2 7"x15" oem wheels be shipped to 76801? if you are planning on taking them to the meet, dont worry about me. I will find some sooner or later. LOL.

Thanks.

teeitup · 04-19-2013, 07:53 AM

Dale, I'll go out there in a bit and see which side it is, I got put on kid duty last night

Slow Poke, only have the one

Thanks Randy

SLOW POKE · 04-19-2013, 08:00 AM

OK. How much for it?

teeitup · 04-19-2013, 08:26 AM

$40 plus ship

**Ol Blue K20** · 04-19-2013, 08:38 AM

Ok, thanks
Posted via Mobile Device

teeitup · 04-19-2013, 08:40 AM

Dale, its a pass side, $28 shipped for it. Thanks Randy

SLOW POKE · 04-19-2013, 08:57 AM

Ill pass, Thank you though..

**Ol Blue K20** · 04-19-2013, 09:34 AM

Randy, I'll take it pm me the payment info and I'll get it to ya after work today. Thanks, Dale
Posted via Mobile Device

**Ol Blue K20** · 04-20-2013, 11:47 AM

Quote:

Originally Posted by teeitup

Dale, its a pass side, $28 shipped for it. Thanks Randy

Payment is on it's way Randy, On my way to mail it. Thanks, Dale

gdavis · 04-20-2013, 05:04 PM

do u have a set of sbc exhaust early 70's and if do how much to 34446

Bueno 68C-10 · 04-20-2013, 07:30 PM

Randy, I will take the headers, pm me the payment info. and I will get back to ya later.

Thanks,
Hayden

teeitup · 04-22-2013, 09:11 PM

Dale, I will let you know when it gets here, Thanks

gdavis, sorry only have a driver side one right now

Hayden, info sent

Thanks Randy

teeitup · 04-22-2013, 09:13 PM

Pics for Camstoys, this is all I have that you asked about

teeitup · 04-22-2013, 09:14 PM

Pics for Tommys72, sorry sold the blue vents already. Trim is driver quality, some dings some scrapes

teeitup · 04-22-2013, 09:20 PM

pic for Billy

camtoys1 · 04-22-2013, 09:21 PM

thanks randy pmed you back

**Cash3481** · 04-22-2013, 11:41 PM

Randy:
Do you have a nice sb shroud? I'm looking local but can't seem to find any nice ones for Olyvias truck. Also have a friend looking for a 4X4 hump trim ring if you have one or maybe two.
Mike
Posted via Mobile Device

rlm316 · 04-23-2013, 08:05 AM

Randy, I'll take the booster. Let me know about the oil line and block fitting, also the total price. Thanks, Lane

teeitup · 04-23-2013, 08:06 AM

camtoys, I will check after work

Cash3481, Mike, no shrouds, which ring is he needing 4 speed or transfer, I think I have a 4 speed ring but no transfer ring

Thanks Randy

teeitup · 04-23-2013, 08:07 AM

Lane, I looked for a oil line last night but never found one, I will look some more tonight, booster is yours

Thanks Randy

04-18-2013, 01:44 PM	#27
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Getting ready for swap meet in Lawrence so here are some parts Ok, thanks Randy. I'll probably make it out on Saturday. Posted via Mobile Device __________________ Scott

04-18-2013, 07:08 PM	#29
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Getting ready for swap meet in Lawrence so here are some parts David, that will work Hayden, they are not dinged up, don't seem to be thin walled. I'm pretty sure they will fit a 327 ol Blue K20, I'll have to check which side it is, it came off a 1/2 4x4 Scott, I'll be there till 1 or 2 on Sat Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-19-2013, 06:32 AM	#31
SLOW POKE Registered User Join Date: Aug 2011 Location: Texas Posts: 189	Re: Getting ready for swap meet in Lawrence so here are some parts How much would the 2 7"x15" oem wheels be shipped to 76801? if you are planning on taking them to the meet, dont worry about me. I will find some sooner or later. LOL. Thanks. __________________ 68 Short step!!

04-19-2013, 07:53 AM	#32
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Getting ready for swap meet in Lawrence so here are some parts Dale, I'll go out there in a bit and see which side it is, I got put on kid duty last night Slow Poke, only have the one Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-19-2013, 08:00 AM	#33
SLOW POKE Registered User Join Date: Aug 2011 Location: Texas Posts: 189	Re: Getting ready for swap meet in Lawrence so here are some parts OK. How much for it? __________________ 68 Short step!!

04-19-2013, 08:26 AM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Getting ready for swap meet in Lawrence so here are some parts $40 plus ship __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-19-2013, 08:38 AM	#35
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,115	Re: Getting ready for swap meet in Lawrence so here are some parts Ok, thanks Posted via Mobile Device __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

04-19-2013, 08:40 AM	#36
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Getting ready for swap meet in Lawrence so here are some parts Dale, its a pass side, $28 shipped for it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-19-2013, 08:57 AM	#37
SLOW POKE Registered User Join Date: Aug 2011 Location: Texas Posts: 189	Re: Getting ready for swap meet in Lawrence so here are some parts Ill pass, Thank you though.. __________________ 68 Short step!!

04-19-2013, 09:34 AM	#38
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,115	Re: Getting ready for swap meet in Lawrence so here are some parts Randy, I'll take it pm me the payment info and I'll get it to ya after work today. Thanks, Dale Posted via Mobile Device __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

04-20-2013, 05:04 PM	#40
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: Getting ready for swap meet in Lawrence so here are some parts do u have a set of sbc exhaust early 70's and if do how much to 34446

04-20-2013, 07:30 PM	#41
Bueno 68C-10 Registered User Join Date: Apr 2013 Location: near Grand Island, Nebraska Posts: 211	Re: Getting ready for swap meet in Lawrence so here are some parts Randy, I will take the headers, pm me the payment info. and I will get back to ya later. Thanks, Hayden

04-22-2013, 09:11 PM	#42
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Getting ready for swap meet in Lawrence so here are some parts Dale, I will let you know when it gets here, Thanks gdavis, sorry only have a driver side one right now Hayden, info sent Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-22-2013, 09:13 PM	#43
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Getting ready for swap meet in Lawrence so here are some parts Pics for Camstoys, this is all I have that you asked about Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-22-2013, 09:14 PM	#44
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Getting ready for swap meet in Lawrence so here are some parts Pics for Tommys72, sorry sold the blue vents already. Trim is driver quality, some dings some scrapes Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

04-22-2013, 09:20 PM	#45
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Getting ready for swap meet in Lawrence so here are some parts pic for Billy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-22-2013, 09:21 PM	#46
camtoys1 Registered User Join Date: Jul 2009 Location: huntington beach ca Posts: 341	Re: Getting ready for swap meet in Lawrence so here are some parts thanks randy pmed you back

04-22-2013, 11:41 PM	#47
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Getting ready for swap meet in Lawrence so here are some parts Randy: Do you have a nice sb shroud? I'm looking local but can't seem to find any nice ones for Olyvias truck. Also have a friend looking for a 4X4 hump trim ring if you have one or maybe two. Mike Posted via Mobile Device

04-23-2013, 08:05 AM	#48
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: Getting ready for swap meet in Lawrence so here are some parts Randy, I'll take the booster. Let me know about the oil line and block fitting, also the total price. Thanks, Lane

04-23-2013, 08:06 AM	#49
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Getting ready for swap meet in Lawrence so here are some parts camtoys, I will check after work Cash3481, Mike, no shrouds, which ring is he needing 4 speed or transfer, I think I have a 4 speed ring but no transfer ring Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-23-2013, 08:07 AM	#50
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Getting ready for swap meet in Lawrence so here are some parts Lane, I looked for a oil line last night but never found one, I will look some more tonight, booster is yours Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.