goodmark repro bed - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bennett68C10 · 05-03-2013, 08:19 AM

Quote:

Originally Posted by CC69Rat

Just curious what a complete bed sells for?
Posted via Mobile Device

I'll be using a wood floor and priced it out from sokyclassics with everything but the wood itself for around $1800 and they quoted me about $530 shipping to a residential address in NJ. I'm sure your shipping would be much less due to you being in Tennessee.
Posted via Mobile Device

**CC69Rat** · 05-03-2013, 08:31 AM

Id just go pick it up

. ..

(And cut my own wood..)
Posted via Mobile Device

shearjs · 05-11-2013, 09:14 PM

I picked up my new fleetside bed kit from So. Ky. Classics this morning and got it bolted together this afternoon. Things seem to go together pretty well and lined up as good as could be expected. It seems to be a good quality kit and is gonna look good once it's set into place. All in all, I'm happy with my purchase, and would buy the same kit again if in the market for a bed.

**CC69Rat** · 05-11-2013, 09:43 PM

Post up some pictures if/when you can.
Posted via Mobile Device

BCOWANWHEELS · 05-11-2013, 11:21 PM

What was the cost please ?

shearjs · 05-12-2013, 12:13 PM

I'll post some pictures later tonight when I return home. The cost was $2185 after a 5% online discount. I picked it up from their shop in Bowling Green as it's only 45-60 mins away.

**CC69Rat** · 05-12-2013, 12:37 PM

1800+ tax I guess?
Posted via Mobile Device

**screaminchevypickup** · 05-12-2013, 01:08 PM

Repop bedsides..
Posted via Mobile Device

**screaminchevypickup** · 05-12-2013, 01:13 PM

Another one..
Posted via Mobile Device

**CC69Rat** · 05-12-2013, 02:40 PM

I'm just looking at the thickness of the metal, the fit of one panel to the other, etc. Shiney is good too but for me I just want to make sure its close to factory spec. I have seen and heard horror stories of 1/2 gap between the panels and stuff. As long as they fit fairly close to original spec and won't dent if someone leans on it.. (?). I may go this route.
Posted via Mobile Device

Fldawg · 05-12-2013, 02:45 PM

Quote:

Originally Posted by CC69Rat

I'm just looking at the thickness of the metal, the fit of one panel to the other, etc. Shiney is good too but for me I just want to make sure its close to factory spec. I have seen and heard horror stories of 1/2 gap between the panels and stuff. As long as they fit fairly close to original spec and won't dent if someone leans on it.. (?). I may go this route.
Posted via Mobile Device

i don't know if you seen my previous post but , i did alot of sheetmetal thumping and the bed i got from soky was by far the best metal i checked
if anything get the bed floor from them very heavy duty and no gaps in mine
i bought a smooth tailgate from LMC and that was the only probelm i had out of sheetmetal

**CC69Rat** · 05-12-2013, 02:57 PM

If they're this good, then I'm going this route too absolutely.. maybe they have stepped up their quality (?). I'm curious to see one. Bowling Green is not far from me at all. I may be taking a road trip soon myself

I just thought they were thin and didn't fit this good.
Posted via Mobile Device

Fldawg · 05-12-2013, 03:19 PM

Quote:

Originally Posted by CC69Rat

If they're this good, then I'm going this route too absolutely.. maybe they have stepped up their quality (?). I'm curious to see one. Bowling Green is not far from me at all. I may be taking a road trip soon myself

I just thought they were thin and didn't fit this good.
Posted via Mobile Device

my only regret is not getting the bedsides without stake holes

**CC69Rat** · 05-12-2013, 03:34 PM

So your price includes the metal bed floor?
Posted via Mobile Device

BCOWANWHEELS · 05-12-2013, 04:09 PM

WITHOUT STAKE holes boy that would be the neatest thing......

VA72C10 · 05-12-2013, 04:25 PM

I've had aftermarket sides and compared them to factory and the gauge was actually slightly thicker than factory. They also weighed more despite the factory sides having paint and trim on them. Also, the NOS tailgate I had weighed slightly less than the triplus reproduction gate. Plus, the welds are better on the new gates quite honestly...

there are some cheap parts out there...I've seen some ok dynacorn and some really thin... only bad triplus panels I've had/heard of were old reproduction doors but those are fixed now and lower door inner panels (those are waaay off...)

Fldawg · 05-12-2013, 05:01 PM

Quote:

Originally Posted by BCOWANWHEELS

WITHOUT STAKE holes boy that would be the neatest thing......

They sell em, wish i would have got them

shearjs · 05-12-2013, 09:02 PM

The $2185 I paid was not including tax since I was out of state and no shipping since I picked it up. I think they normally charge $2300 for a bed kit, with a lettered tailgate, and slightly less for one with a plain jane tailgate. Everything bolted up well. The tailgate fit well, and the gaps on each side were dead on. Woodall Industries makes their sheetmetal in Taiwan, and SoKy Classics is the retail side of things. The fella I spoke to while I was there said that they sell quite a few bed parts to the other vendors around...LMC, Classic Parts, etc. I didn't get any really close up pictures of the gaps, just a couple throughout assembly. It still isn't bolted to the frame, so my body lines may be off slightly, but that will be taken care of on the next go trip.

Bennett68C10 · 05-13-2013, 08:17 AM

Bed looks great, this is definitely the direction I'm going with mine but I'll be ordering mine without stake pockets or marker lights.
Posted via Mobile Device

**CC69Rat** · 05-13-2013, 08:53 AM

Yep, I'm going this route too unless I find a prestine SWB fleet bed off of a 10k mile Cheyenne Super in the next few months..

**CUSTOM/10** · 05-13-2013, 09:22 AM

I just ordered a pair of bedsides for my project, got tired of searching for OEM stuff. I've been hear good things about the repop bed stuff, can't wait to see them !

Now I'm thinking I should have ordered a new floor too !!!

Gary

**70CHEVYBB** · 05-13-2013, 09:46 AM

I am converting from metal floor to wood floor. I have a new head board,fenderwells,cross braces,tailgate and bed sides. I should be priming them this week and bolting it all together to check the fit. I did not have a way to weigh the bed sides but feel heavier than the factory ones.

**70STOVEBOLT** · 07-11-2013, 05:04 PM

Quote:

Originally Posted by GMCPaul

We offer the Fleetside complete SWB bed kits for $2100.00 and the LWB bed kits for $2600.00
Paul Jr @ GMCPauls

Paul, what brand are yours?

**GMCPaul** · 07-11-2013, 05:14 PM

Quote:

Originally Posted by 70STOVEBOLT

Paul, what brand are yours?

Woodall Industries

big d's red67 · 07-11-2013, 06:09 PM

I got my bedsides from GMCPauls and the wood floor kit from Mark-k's I'm happy with them both. I have a little less than $2000 all together.

05-03-2013, 08:31 AM	#27
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: goodmark repro bed Id just go pick it up . .. (And cut my own wood..) Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-11-2013, 09:14 PM	#28
shearjs Registered User Join Date: Mar 2011 Location: Thompsons Station, TN Posts: 700	Re: goodmark repro bed I picked up my new fleetside bed kit from So. Ky. Classics this morning and got it bolted together this afternoon. Things seem to go together pretty well and lined up as good as could be expected. It seems to be a good quality kit and is gonna look good once it's set into place. All in all, I'm happy with my purchase, and would buy the same kit again if in the market for a bed. __________________ -Jason '72 Family Hauler Rufus' Restoration - 70 GMC, LS swap - SOLD

05-11-2013, 09:43 PM	#29
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: goodmark repro bed Post up some pictures if/when you can. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-11-2013, 11:21 PM	#30
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: goodmark repro bed What was the cost please ? __________________ I BELIEVE IN JOHN 3:16

05-12-2013, 12:13 PM	#31
shearjs Registered User Join Date: Mar 2011 Location: Thompsons Station, TN Posts: 700	Re: goodmark repro bed I'll post some pictures later tonight when I return home. The cost was $2185 after a 5% online discount. I picked it up from their shop in Bowling Green as it's only 45-60 mins away. __________________ -Jason '72 Family Hauler Rufus' Restoration - 70 GMC, LS swap - SOLD

05-12-2013, 12:37 PM	#32
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: goodmark repro bed 1800+ tax I guess? Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-12-2013, 01:08 PM	#33
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: goodmark repro bed Repop bedsides.. Posted via Mobile Device Attached Images __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

05-12-2013, 01:13 PM	#34
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: goodmark repro bed Another one.. Posted via Mobile Device Attached Images __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

05-12-2013, 02:40 PM	#35
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: goodmark repro bed I'm just looking at the thickness of the metal, the fit of one panel to the other, etc. Shiney is good too but for me I just want to make sure its close to factory spec. I have seen and heard horror stories of 1/2 gap between the panels and stuff. As long as they fit fairly close to original spec and won't dent if someone leans on it.. (?). I may go this route. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-12-2013, 02:57 PM	#37
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: goodmark repro bed If they're this good, then I'm going this route too absolutely.. maybe they have stepped up their quality (?). I'm curious to see one. Bowling Green is not far from me at all. I may be taking a road trip soon myself I just thought they were thin and didn't fit this good. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-12-2013, 03:34 PM	#39
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: goodmark repro bed So your price includes the metal bed floor? Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-12-2013, 04:09 PM	#40
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: goodmark repro bed WITHOUT STAKE holes boy that would be the neatest thing...... __________________ I BELIEVE IN JOHN 3:16

05-12-2013, 04:25 PM	#41
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: goodmark repro bed I've had aftermarket sides and compared them to factory and the gauge was actually slightly thicker than factory. They also weighed more despite the factory sides having paint and trim on them. Also, the NOS tailgate I had weighed slightly less than the triplus reproduction gate. Plus, the welds are better on the new gates quite honestly... there are some cheap parts out there...I've seen some ok dynacorn and some really thin... only bad triplus panels I've had/heard of were old reproduction doors but those are fixed now and lower door inner panels (those are waaay off...) __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-12-2013, 09:02 PM	#43
shearjs Registered User Join Date: Mar 2011 Location: Thompsons Station, TN Posts: 700	Re: goodmark repro bed The $2185 I paid was not including tax since I was out of state and no shipping since I picked it up. I think they normally charge $2300 for a bed kit, with a lettered tailgate, and slightly less for one with a plain jane tailgate. Everything bolted up well. The tailgate fit well, and the gaps on each side were dead on. Woodall Industries makes their sheetmetal in Taiwan, and SoKy Classics is the retail side of things. The fella I spoke to while I was there said that they sell quite a few bed parts to the other vendors around...LMC, Classic Parts, etc. I didn't get any really close up pictures of the gaps, just a couple throughout assembly. It still isn't bolted to the frame, so my body lines may be off slightly, but that will be taken care of on the next go trip. Attached Images __________________ -Jason '72 Family Hauler Rufus' Restoration - 70 GMC, LS swap - SOLD

05-13-2013, 08:17 AM	#44
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: goodmark repro bed Bed looks great, this is definitely the direction I'm going with mine but I'll be ordering mine without stake pockets or marker lights. Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10



Register or Log In To remove these advertisements.

05-13-2013, 08:53 AM	#45
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: goodmark repro bed Yep, I'm going this route too unless I find a prestine SWB fleet bed off of a 10k mile Cheyenne Super in the next few months.. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-13-2013, 09:22 AM	#46
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,854	Re: goodmark repro bed I just ordered a pair of bedsides for my project, got tired of searching for OEM stuff. I've been hear good things about the repop bed stuff, can't wait to see them ! Now I'm thinking I should have ordered a new floor too !!! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

05-13-2013, 09:46 AM	#47
70CHEVYBB Senior Member Join Date: Feb 2012 Location: chillicothe, illinois Posts: 690	Re: goodmark repro bed I am converting from metal floor to wood floor. I have a new head board,fenderwells,cross braces,tailgate and bed sides. I should be priming them this week and bolting it all together to check the fit. I did not have a way to weigh the bed sides but feel heavier than the factory ones.

07-11-2013, 06:09 PM	#50
big d's red67 Registered User Join Date: May 2010 Location: Broken Arrow Okla. Posts: 510	Re: goodmark repro bed I got my bedsides from GMCPauls and the wood floor kit from Mark-k's I'm happy with them both. I have a little less than $2000 all together. __________________ 1967 swb 454 cid 700R4 trans SOLD 2006 Chevy Trailblazer SS 2013 Camaro RS convertible the wife's Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=573248

Register or Log In To remove these advertisements.