TX 1966 bbw cab and doors for sale - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

concretekiller · 06-18-2013, 09:26 PM

I'd like the BBW section if you part out the cab. I'm in tx as well (Houston)
Posted via Mobile Device

Johns66 · 06-19-2013, 07:44 PM

chevyjr I will take some pictures of the top of the cab tomorrow night.

concretekiller if I do not hear from another guy from this board that pm'd me with an offer to buy the cab on the 15th, you have first dibs after him as I will be cutting it up.

concretekiller · 06-19-2013, 07:46 PM

15th of July? Today is the 19th.
Posted via Mobile Device

Johns66 · 06-19-2013, 08:43 PM

concretekiller I guess you are right if he has not responded back by now he probably won't.

You have dibs on the BBW section I sent you a pm, let me know.

What I have left:

V8 motor mounts $70
Custom windshield trim $150 - nice shape one small bend I will take some close up pictures tomorrow.
Drivers door $150 - Almost perfect no rust through or dents includes window.
Passenger door $100 - small amount of damage see pictures
Heater controls levers broke
Gas tank - $35 no shipping
Dash - willing to separate/cut out has not been cut in radio section.
Trailing arms and springs - $75
Front chrome bumper - $50

Johns66 · 06-19-2013, 08:47 PM

chevyjr you can have dibs on the top piece if you are interested I will post some pictures tomorrow as I am going to start cutting the cab up.

bgbchevy · 06-19-2013, 09:27 PM

Pm sent. Sorry about the delay. Ive been tied up at work. Dad and I are going to pass on the cab. Best of luck to those that will get a nice BBW truck.
Posted via Mobile Device

Johns66 · 06-19-2013, 10:00 PM

Chevyjr I would be willing to sell that it is the low hump.
Posted via Mobile Device

Johns66 · 06-19-2013, 10:54 PM

BBW section sale pending to concretekiller.b

Plenty of good parts left I had to see any of these parts go to waste in this cab pm or post your needs.

John.
Posted via Mobile Device

blackcloud45 · 06-20-2013, 02:35 PM

I'm interested in the doors. Also in Houston...

Johns66 · 06-20-2013, 08:44 PM

Blackcloud45 you have first dibs on the doors, I sent you a private message.

Thanks,

John

Johns66 · 06-23-2013, 09:56 PM

Blackcloud45 I emailed pictures of the drivers side should be able to get the passenger side off in the next couple days and get pictures of the bottom.

65sw · 06-24-2013, 03:23 PM

Do you still have the cab? I'm interested in the doors too if the other deal falls through.
Posted via Mobile Device

Johns66 · 06-24-2013, 10:04 PM

I have sold the back window section and doors but I have the rest of the cab and parts listed.

Thanks.
Posted via Mobile Device

bj383ss · 06-27-2013, 09:25 AM

What does the front windshield look like? If it is in good shape how much? Also does the gas tank come with straps and filler neck?

I live in Leander so I will pickup.
Bret

Johns66 · 06-27-2013, 07:55 PM

Front windshield ended up being no good it had lots of "bubbles" around the edges.

Gas tank comes with filler neck, straps and sending unit.

Vent windows are being sold with the doors, I have someone from the board with first dibs on those. I will let you know if I come across any extra vent windows.

Johns66 · 06-29-2013, 12:55 AM

66sw doors are available sent you a pm.
Posted via Mobile Device

Johns66 · 07-12-2013, 09:28 PM

Chevyjr sent you a pm message here are the pictures of the low hump that I cut out for you.

Thanks,

John

64ScrubnTub · 08-18-2013, 11:32 PM

How much for frt. chrome bumper shipped to 30252 thanks.

64ScrubnTub · 08-18-2013, 11:35 PM

Quote:

Originally Posted by 64ScrubnTub

How much for frt. chrome bumper shipped to 30252 thanks.

Could you please post pic of bumper also thanks again.

Johns66 · 08-19-2013, 12:18 AM

Okay should be able to get some close up pictures Tuesday evening. It has a chrome brush guard on it.
Posted via Mobile Device

Johns66 · 08-19-2013, 12:21 AM

I still have the dash, v8 motor mounts, Guage cluster, and other parts from this thing.
Posted via Mobile Device

64ScrubnTub · 08-19-2013, 08:54 PM

Thanks, will be waiting.

Johns66 · 08-20-2013, 09:25 PM

ScrubnTub here are the bumper pictures, the bumper is straight. Looks like it should cleanup nicely.

I do not want to try to ship the "cattle guard" unless you really want it. If you do want that, you can have it for the shipping cost.

How about $80 for the bumper and about $45 for shipping (this should be close).

Let me know.

Thanks,

John

64ScrubnTub · 08-20-2013, 09:57 PM

John, I care nothing about the cattle guard, was only interested in the bumper, but in post #29 you quoted $50 on the bumper ?????????

Johns66 · 08-20-2013, 10:06 PM

Right you are, my apologies. $50 it is plus shipping if you want it.

06-18-2013, 09:26 PM	#26
concretekiller Registered User Join Date: Jan 2009 Location: houston Posts: 196	Re: 1966 bbw cab and doors for sale I'd like the BBW section if you part out the cab. I'm in tx as well (Houston) Posted via Mobile Device

06-19-2013, 07:44 PM	#27
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1966 bbw cab and doors for sale chevyjr I will take some pictures of the top of the cab tomorrow night. concretekiller if I do not hear from another guy from this board that pm'd me with an offer to buy the cab on the 15th, you have first dibs after him as I will be cutting it up.

06-19-2013, 07:46 PM	#28
concretekiller Registered User Join Date: Jan 2009 Location: houston Posts: 196	Re: 1966 bbw cab and doors for sale 15th of July? Today is the 19th. Posted via Mobile Device

06-19-2013, 08:47 PM	#30
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1966 bbw cab and doors for sale chevyjr you can have dibs on the top piece if you are interested I will post some pictures tomorrow as I am going to start cutting the cab up.

06-19-2013, 09:27 PM	#31
bgbchevy Registered User Join Date: Aug 2001 Location: College Station, Texas Posts: 486	Re: 1966 bbw cab and doors for sale Pm sent. Sorry about the delay. Ive been tied up at work. Dad and I are going to pass on the cab. Best of luck to those that will get a nice BBW truck. Posted via Mobile Device __________________ 1972 Chevrolet C/20 LWB, BB 402, Tach, Bedside Toolbox, Posi, Factory AC, Factory AM/FM, cruise, Dana 60

06-19-2013, 08:43 PM	#29
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1966 bbw cab and doors for sale concretekiller I guess you are right if he has not responded back by now he probably won't. You have dibs on the BBW section I sent you a pm, let me know. What I have left: V8 motor mounts $70 Custom windshield trim $150 - nice shape one small bend I will take some close up pictures tomorrow. Drivers door $150 - Almost perfect no rust through or dents includes window. Passenger door $100 - small amount of damage see pictures Heater controls levers broke Gas tank - $35 no shipping Dash - willing to separate/cut out has not been cut in radio section. Trailing arms and springs - $75 Front chrome bumper - $50

06-19-2013, 10:00 PM	#32
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1966 bbw cab and doors for sale Chevyjr I would be willing to sell that it is the low hump. Posted via Mobile Device

06-19-2013, 10:54 PM	#33
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1966 bbw cab and doors for sale BBW section sale pending to concretekiller.b Plenty of good parts left I had to see any of these parts go to waste in this cab pm or post your needs. John. Posted via Mobile Device

06-20-2013, 02:35 PM	#34
blackcloud45 Registered User Join Date: Jul 2012 Location: Houston, TX Posts: 41	Re: 1966 bbw cab and doors for sale I'm interested in the doors. Also in Houston... __________________ It always comes down to that one stupid bolt...

06-20-2013, 08:44 PM	#35
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1966 bbw cab and doors for sale Blackcloud45 you have first dibs on the doors, I sent you a private message. Thanks, John

06-23-2013, 09:56 PM	#36
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1966 bbw cab and doors for sale Blackcloud45 I emailed pictures of the drivers side should be able to get the passenger side off in the next couple days and get pictures of the bottom.

06-24-2013, 03:23 PM	#37
65sw Registered User Join Date: May 2012 Location: Cedar Creek, Tx Posts: 29	Re: 1966 bbw cab and doors for sale Do you still have the cab? I'm interested in the doors too if the other deal falls through. Posted via Mobile Device

06-24-2013, 10:04 PM	#38
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1966 bbw cab and doors for sale I have sold the back window section and doors but I have the rest of the cab and parts listed. Thanks. Posted via Mobile Device

06-27-2013, 09:25 AM	#39
bj383ss Registered User Join Date: Sep 2012 Location: Leander, TX Posts: 969	Re: 1966 bbw cab and doors for sale What does the front windshield look like? If it is in good shape how much? Also does the gas tank come with straps and filler neck? I live in Leander so I will pickup. Bret __________________ 64' Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=586955

06-27-2013, 07:55 PM	#40
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1966 bbw cab and doors for sale Front windshield ended up being no good it had lots of "bubbles" around the edges. Gas tank comes with filler neck, straps and sending unit. Vent windows are being sold with the doors, I have someone from the board with first dibs on those. I will let you know if I come across any extra vent windows.



Register or Log In To remove these advertisements.

06-29-2013, 12:55 AM	#41
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1966 bbw cab and doors for sale 66sw doors are available sent you a pm. Posted via Mobile Device

07-12-2013, 09:28 PM	#42
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1966 bbw cab and doors for sale Chevyjr sent you a pm message here are the pictures of the low hump that I cut out for you. Thanks, John Attached Images

08-18-2013, 11:32 PM	#43
64ScrubnTub Registered User Join Date: Jan 2012 Location: Henry Co, Ga. Posts: 7	Re: 1966 bbw cab and doors for sale How much for frt. chrome bumper shipped to 30252 thanks.

08-19-2013, 12:18 AM	#45
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1966 bbw cab and doors for sale Okay should be able to get some close up pictures Tuesday evening. It has a chrome brush guard on it. Posted via Mobile Device

08-19-2013, 12:21 AM	#46
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1966 bbw cab and doors for sale I still have the dash, v8 motor mounts, Guage cluster, and other parts from this thing. Posted via Mobile Device

08-19-2013, 08:54 PM	#47
64ScrubnTub Registered User Join Date: Jan 2012 Location: Henry Co, Ga. Posts: 7	Re: 1966 bbw cab and doors for sale Thanks, will be waiting.

08-20-2013, 09:25 PM	#48
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1966 bbw cab and doors for sale ScrubnTub here are the bumper pictures, the bumper is straight. Looks like it should cleanup nicely. I do not want to try to ship the "cattle guard" unless you really want it. If you do want that, you can have it for the shipping cost. How about $80 for the bumper and about $45 for shipping (this should be close). Let me know. Thanks, John Attached Images

08-20-2013, 09:57 PM	#49
64ScrubnTub Registered User Join Date: Jan 2012 Location: Henry Co, Ga. Posts: 7	Re: 1966 bbw cab and doors for sale John, I care nothing about the cattle guard, was only interested in the bumper, but in post #29 you quoted $50 on the bumper ?????????

08-20-2013, 10:06 PM	#50
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1966 bbw cab and doors for sale Right you are, my apologies. $50 it is plus shipping if you want it.

Register or Log In To remove these advertisements.