CA Misc 60 thru 66 parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oem4me · 08-05-2013, 03:42 PM

I can't tell how bad/good the chrome is on the Custom Camper emblems. I don't mind dirt, but will they clean up ok?

UGLY66 · 08-05-2013, 09:41 PM

PM SENT re: sail trim

**yelmer** · 08-06-2013, 12:58 AM

do you have any starters for turbo 400 ?

hd74 · 08-06-2013, 08:13 AM

in photo #22 is that a heater delete cover for a dash? if it is I`am interested. Thanks ken

Budman56 · 08-06-2013, 03:31 PM

Quote:

Originally Posted by oem4me

I can't tell how bad/good the chrome is on the Custom Camper emblems. I don't mind dirt, but will they clean up ok?

I did clean them up I will try to get you a photo later tomorrow

Budman56 · 08-06-2013, 03:33 PM

Quote:

Originally Posted by yelmer

do you have any starters for turbo 400 ?

yelmer I did see your pm about the starter< I just haven't had time to go pull it off and look a the number to see if they match the number that you were looking for, I will try to get to it later this weekend.

Budman56 · 08-06-2013, 03:35 PM

Quote:

Originally Posted by hd74

in photo #22 is that a heater delete cover for a dash? if it is I`am interested. Thanks ken

yes it is for an 60 thru 63 heater delete cover.

hd74 · 08-06-2013, 03:37 PM

I want it,how much,sending massage

Budman56 · 08-06-2013, 03:38 PM

Quote:

Originally Posted by UGLY66

PM SENT re: sail trim

pm sent back to you

**argonaut** · 08-07-2013, 02:29 AM

Interested in the kick panel vent grills, in photo 20. $20 plus the ride.
Posted via Mobile Device

Budman56 · 08-07-2013, 11:01 AM

Quote:

Originally Posted by oem4me

I can't tell how bad/good the chrome is on the Custom Camper emblems. I don't mind dirt, but will they clean up ok?

Here are the photos I have cleaned them up a little.

Budman56 · 08-07-2013, 11:05 AM

Quote:

Originally Posted by argonaut

Interested in the kick panel vent grills, in photo 20. $20 plus the ride.
Posted via Mobile Device

Sold to Argonaut I think they will fit into a postal flate rate box let me check tomorrow for you.

**argonaut** · 08-07-2013, 11:32 AM

Sweet, thanks!

oem4me · 08-08-2013, 01:32 AM

Quote:

Originally Posted by Budman56

Here are the photos I have cleaned them up a little.

Still can't quite tell the chrome quality, but I'll take a chance. Would you do $50 shipped to 91506?

Budman56 · 08-08-2013, 11:11 AM

Quote:

Originally Posted by oem4me

Still can't quite tell the chrome quality, but I'll take a chance. Would you do $50 shipped to 91506?

I think that a buffer could make them look a lot better I just used water, soap and a spung, yes I would do that pm me your address and I will ship them.

padresag · 08-08-2013, 12:53 PM

Quote:

Originally Posted by Budman56

I have misc parts from parts trucks that I will not be using, if interested make me an offer on the part or parts you want, and I will let you know what the shipping will cost. thank you for looking.

sale pending for emblems 8/8/13

I thought that you were supposed to price your items
ron

Budman56 · 08-08-2013, 05:10 PM

Quote:

Originally Posted by padresag

I thought that you were supposed to price your items
ron

You could be right I will do that I just wanted to get rid of the stuff I had and didn't want to over price it. I will add prices.

**slepysal** · 08-08-2013, 05:13 PM

pm sent

steelwheel · 08-10-2013, 11:45 AM

how much for the custom cab moldings to CA 90744?

Budman56 · 08-12-2013, 12:26 PM

Quote:

Originally Posted by argonaut

Sweet, thanks!

Argonaut the vents plus the housing will fit into a flat rate box its about $20 with insurance.

sitos · 08-12-2013, 08:33 PM

If steel wheel doesn't buy custom can moldings. How much to zip 91745?
thanks

LostMy65 · 08-12-2013, 08:48 PM

Quote:

Originally Posted by Budman56

photo 10 asking $40 glove box with cardboard insert asking $10 windshield wipers asking 20 rear view mirrow

Could I get a closeup of the wiper arms of this area?

Budman56 · 08-13-2013, 03:40 PM

Quote:

Originally Posted by LostMy65

Could I get a closeup of the wiper arms of this area?

do you want just the wiper arm end (photo)? or both parts where the arm attaches to?

LostMy65 · 08-13-2013, 04:05 PM

Quote:

Originally Posted by Budman56

do you want just the wiper arm end (photo)? or both parts where the arm attaches to?

I just need a pic of the wiper arm end.
Thanks
Posted via Mobile Device

LostMy65 · 08-13-2013, 04:07 PM

I'm wanting to see if your arms have a fine spline connection like in the pic.
Posted via Mobile Device

08-05-2013, 03:42 PM	#26
oem4me Registered User Join Date: Aug 2010 Location: Burbank CA Posts: 3,055	Re: Misc 60 thru 66 parts I can't tell how bad/good the chrome is on the Custom Camper emblems. I don't mind dirt, but will they clean up ok?

08-05-2013, 09:41 PM	#27
UGLY66 Registered User Join Date: Jan 2012 Location: Florala, FL Posts: 15	Re: Misc 60 thru 66 parts PM SENT re: sail trim

08-06-2013, 12:58 AM	#28
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: Misc 60 thru 66 parts do you have any starters for turbo 400 ?

08-06-2013, 08:13 AM	#29
hd74 Registered User Join Date: Jun 2009 Location: shellman bluff,ga Posts: 250	Re: Misc 60 thru 66 parts in photo #22 is that a heater delete cover for a dash? if it is I`am interested. Thanks ken

08-06-2013, 03:37 PM	#33
hd74 Registered User Join Date: Jun 2009 Location: shellman bluff,ga Posts: 250	Re: Misc 60 thru 66 parts I want it,how much,sending massage

08-07-2013, 02:29 AM	#35
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Misc 60 thru 66 parts Interested in the kick panel vent grills, in photo 20. $20 plus the ride. Posted via Mobile Device __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

08-07-2013, 11:32 AM	#38
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Misc 60 thru 66 parts Sweet, thanks! __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

08-08-2013, 05:13 PM	#43
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Misc 60 thru 66 parts pm sent __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

08-10-2013, 11:45 AM	#44
steelwheel Registered User Join Date: Jul 2013 Location: Hamburg, Germany Posts: 7	Re: Misc 60 thru 66 parts how much for the custom cab moldings to CA 90744?

08-12-2013, 08:33 PM	#46
sitos Registered User Join Date: May 2011 Location: hacienda heights,ca Posts: 16	Re: Misc 60 thru 66 parts If steel wheel doesn't buy custom can moldings. How much to zip 91745? thanks

08-13-2013, 04:07 PM	#50
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Misc 60 thru 66 parts I'm wanting to see if your arms have a fine spline connection like in the pic. Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.