Blazer half cabs - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jaros44sr** · 09-12-2013, 06:13 PM

Im thinking 200 is bit on high side, but as you say, better then 400

skorpioskorpio · 09-12-2013, 06:14 PM

Quote:

Originally Posted by Boneyard

That would be me. I'm having a hard time finding someone to produce 2 or 3 at a time for a reasonable price. The way it looks now I would have to sell them for 1500 each.

I don't see that being unreasonable if the quality is on par with what Jaros looks like. Is that a real number? Would it be textured or gelled at that? I assume the molds are smooth and the texture is an after the fact thing.

...and is it doable in carbon and if so how much more would that be?

mcmlxix · 09-12-2013, 06:14 PM

I think some carbon fiber is in order here....

Actually I would like a full top in CF....

**jaros44sr** · 09-12-2013, 06:22 PM

Quote:

Originally Posted by skorpioskorpio

I don't see that being unreasonable if the quality is on par with what Jaros looks like. Is that a real number? Would it be textured or gelled at that? I assume the molds are smooth and the texture is an after the fact thing.

...and is it doable in carbon and if so how much more would that be?

Actually, i agree with you, not unreasonable price at all. The product is not out there in any shape or form. Just a very limited market, but with limited production numbers, that shouldnt be a problem. Shipping is the biggest cost, building a pallet and all

Boneyard · 09-12-2013, 08:17 PM

The tops made from the molds I bought from Jurassic-1 weight about 75lbs. The paper work that came with the molds said "should be 60-65lbs finished" but I would say 75lbs is closer. These are the same molds used by Glasstite, Creative Products, Elite Custom Products, and Minnesota Truck Products.

Big Block · 09-12-2013, 08:22 PM

If the price would be in the $500 range I would buy one tomorrow.

FireBros. · 09-12-2013, 08:46 PM

Quote:

Originally Posted by Big Block

If the price would be in the $500 range I would buy one tomorrow.

+1
Posted via Mobile Device

RLONG · 09-13-2013, 01:52 PM

I would buy a lot at that price. I gave 1000.00 for one last year with out the back wall the guy says materials are more now so would be higher if he made any more.

FireBros. · 09-13-2013, 02:10 PM

Quote:

Originally Posted by RLONG

I would buy a lot at that price. I gave 1000.00 for one last year with out the back wall the guy says materials are more now so would be higher if he made any more.

This is probably close to what the market can handle. I've seen a few change hands at this price, including used ones. It's also not that much more than what a soft top costs nowadays, which I would consider a competing product for a lot of people.
Posted via Mobile Device

**jaros44sr** · 09-13-2013, 06:18 PM

Quote:

Originally Posted by FireBros.

This is probably close to what the market can handle. I've seen a few change hands at this price, including used ones. It's also not that much more than what a soft top costs nowadays, which I would consider a competing product for a lot of people.
Posted via Mobile Device

But, on the comfort level of 40 year old heating system, i would prefer a 1/2 top that i only have to heat a smaller space

FireBros. · 09-15-2013, 06:53 PM

I don't need the heat down here in southeast Texas, but half cabs definitely have a cool look.
Posted via Mobile Device

**jaros44sr** · 09-15-2013, 10:33 PM

Ill agree with you on the 'cool factor', makes it much easier for an ol man to have the wind in his hair (what little i have left), plus my wifey digs convertibles

Chulisohombre · 09-17-2013, 10:49 AM

Found mine in the junkyard for 20 bucks. Truck was gone and I walked I've the end of it and was like no that can't be what I think it is. Lol. I sold it a couple years ago for 200. The guy had been looking for about 10 years for one. Weighed about 140 pounds. I carried it on my back out of the yard I pulled it from.
Posted via Mobile Device

truckeez · 09-17-2013, 04:44 PM

Quote:

Originally Posted by RLONG

I would buy a lot at that price. I gave 1000.00 for one last year with out the back wall the guy says materials are more now so would be higher if he made any more.

Yes I made your top (have you got it installed yet-how about pictures)
truckeez at yaw who

yea there's really no way someone can make stuff like the 69-72 tops for a $500.00 dollar bill, the materials have jumped way up--doubling each of the last two yrs. I have to charge $550 for the 76-91 custom cab back panels alone, and do the other pieces as add ons. i can crank out a few before it gets too cool--by early novenmber its too late.
http://67-72chevytrucks.com/vboard/s...d.php?t=538942

FireBros. · 09-17-2013, 05:17 PM

One can always dream of a low cost option, but I think if a high quality lightweight half cab were available, you could sell them. Even at a much higher price.
Posted via Mobile Device

RLONG · 09-17-2013, 05:48 PM

No Truckeez I have not installed the top yet i think I will before winter when I do I will post pics. I still have not built the wall for it either and may have to move my roll bar back hopefully in a couple of weeks can install.

truckeez · 09-17-2013, 08:09 PM

Quote:

Originally Posted by FireBros.

One can always dream of a low cost option, but I think if a high quality lightweight half cab were available, you could sell them. Even at a much higher price.
Posted via Mobile Device

My stuff is First Rate quality,,its just the typical American thinks anything fiberglass is cheap and made by an alcohalic that runs a chopper gun all day. lots of it is too, gives everyone who designs and builds good stuff a bad rap,,

and also the fact that 69-72 is labor INTENSIVE

bcdeutsch731 · 09-18-2013, 05:22 PM

You are not the only one, I would be interested as well. I have been looking for one for about 4 months now with no luck.

RLONG · 09-19-2013, 10:21 AM

The top that is shown on the dog boxes could be the one I bought from truckeez looks identical .

skorpioskorpio · 09-19-2013, 10:26 AM

Quote:

Originally Posted by RLONG

The top that is shown on the dog boxes could be the one I bought from truckeez looks identical .

I am interested to see it on your truck. Are you going to leave it black or paint to match your truck?

Sillyoldman · 09-20-2013, 07:00 AM

This thread is close to getting shut down.

andrewmp6 · 09-20-2013, 07:41 AM

The same kinda top for the 2nd gen blazers is a grand from us body source,But they are not known for making the best fitting stuff either.

***Liz*** · 09-20-2013, 08:01 AM

*side note (and hopefully not a long drawn out one as chicks tend to do

)

Vending.. read the stickies. If you are a vendor, you need to have a vendor subscription. Talking about your product in threads, giving your email for it etc is indeed advertising. You can not do so without the proper membership tier. If you need help in doing so, please contact an admin.
Thanks...

RLONG · 09-20-2013, 12:06 PM

SKORPIOSKORPIO / I am going to have my blazer wrapped so thinking of white. The top is kinda a dark dark blue looking right now.

truckeez · 09-20-2013, 02:41 PM

Quote:

Originally Posted by Liz

*side note (and hopefully not a long drawn out one as chicks tend to do

)

Vending.. read the stickies. If you are a vendor, you need to have a vendor subscription. Talking about your product in threads, giving your email for it etc is indeed advertising. You can not do so without the proper membership tier. If you need help in doing so, please contact an admin.
Thanks...

Liz - I sent a message to Jeff concerning this two days ago and he did not reply.

09-12-2013, 06:13 PM	#26
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: Blazer half cabs Im thinking 200 is bit on high side, but as you say, better then 400 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

09-12-2013, 06:14 PM	#28
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: Blazer half cabs I think some carbon fiber is in order here.... Actually I would like a full top in CF.... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

09-12-2013, 08:17 PM	#30
Boneyard Registered User Join Date: Apr 2004 Location: Waverly, NE Posts: 41	Re: Blazer half cabs The tops made from the molds I bought from Jurassic-1 weight about 75lbs. The paper work that came with the molds said "should be 60-65lbs finished" but I would say 75lbs is closer. These are the same molds used by Glasstite, Creative Products, Elite Custom Products, and Minnesota Truck Products.

09-12-2013, 08:22 PM	#31
Big Block Big Block Join Date: Mar 2005 Location: Durham, N.C. Posts: 1,649	Re: Blazer half cabs If the price would be in the $500 range I would buy one tomorrow.

09-13-2013, 01:52 PM	#33
RLONG Registered User Join Date: Oct 2008 Location: BROOKELAND,TX Posts: 228	Re: Blazer half cabs I would buy a lot at that price. I gave 1000.00 for one last year with out the back wall the guy says materials are more now so would be higher if he made any more.

09-15-2013, 06:53 PM	#36
FireBros. Registered User Join Date: Aug 2013 Location: Klein, TX Posts: 36	Re: Blazer half cabs I don't need the heat down here in southeast Texas, but half cabs definitely have a cool look. Posted via Mobile Device

09-15-2013, 10:33 PM	#37
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: Blazer half cabs Ill agree with you on the 'cool factor', makes it much easier for an ol man to have the wind in his hair (what little i have left), plus my wifey digs convertibles __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

09-17-2013, 10:49 AM	#38
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: Blazer half cabs Found mine in the junkyard for 20 bucks. Truck was gone and I walked I've the end of it and was like no that can't be what I think it is. Lol. I sold it a couple years ago for 200. The guy had been looking for about 10 years for one. Weighed about 140 pounds. I carried it on my back out of the yard I pulled it from. Posted via Mobile Device

09-17-2013, 05:17 PM	#40
FireBros. Registered User Join Date: Aug 2013 Location: Klein, TX Posts: 36	Re: Blazer half cabs One can always dream of a low cost option, but I think if a high quality lightweight half cab were available, you could sell them. Even at a much higher price. Posted via Mobile Device

09-17-2013, 05:48 PM	#41
RLONG Registered User Join Date: Oct 2008 Location: BROOKELAND,TX Posts: 228	Re: Blazer half cabs No Truckeez I have not installed the top yet i think I will before winter when I do I will post pics. I still have not built the wall for it either and may have to move my roll bar back hopefully in a couple of weeks can install.

09-18-2013, 05:22 PM	#43
bcdeutsch731 Registered User Join Date: Mar 2010 Location: West Chicago, IL Posts: 140	Re: Blazer half cabs You are not the only one, I would be interested as well. I have been looking for one for about 4 months now with no luck. __________________ 1969 C10, 2005 LLY Duramax, Wagler Competition built motor, Bullseye Power triple Turbo's, Rossler th400, Neal Chance Racing Converter, Danville Performance tunning. 8.3@168mph 1700+ HP

09-19-2013, 10:21 AM	#44
RLONG Registered User Join Date: Oct 2008 Location: BROOKELAND,TX Posts: 228	Re: Blazer half cabs The top that is shown on the dog boxes could be the one I bought from truckeez looks identical .

09-20-2013, 07:00 AM	#46
Sillyoldman #16876 Join Date: Apr 2005 Location: Auburn WA Posts: 12,266	Re: Blazer half cabs This thread is close to getting shut down. __________________ Posted via Stationary Device '71 Custom Deluxe C-20 402. '67 Buick Special 455. '49 Plymouth Special Deluxe. *"I love that old car smell"* *Some people are like Slinkies... not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs.*

09-20-2013, 07:41 AM	#47
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: Blazer half cabs The same kinda top for the 2nd gen blazers is a grand from us body source,But they are not known for making the best fitting stuff either.

09-20-2013, 08:01 AM	#48
*Liz* Catchy title goes here.. Join Date: Mar 2002 Location: Rockwell, NC Posts: 39,767	Re: Blazer half cabs *side note (and hopefully not a long drawn out one as chicks tend to do ) Vending.. read the stickies. If you are a vendor, you need to have a vendor subscription. Talking about your product in threads, giving your email for it etc is indeed advertising. You can not do so without the proper membership tier. If you need help in doing so, please contact an admin. Thanks...



Register or Log In To remove these advertisements.

09-20-2013, 12:06 PM	#49
RLONG Registered User Join Date: Oct 2008 Location: BROOKELAND,TX Posts: 228	Re: Blazer half cabs SKORPIOSKORPIO / I am going to have my blazer wrapped so thinking of white. The top is kinda a dark dark blue looking right now.

Register or Log In To remove these advertisements.