MO 64 C20 Barn Find Parting Out (new listing)

[USMilitary]

Originally Posted by Clyde65

tail lights assemblies and fender emblems to 76063 if you decide to part those.

Thanks,

pictures are loaded below, taillight bezels were trash, housing are clean and the tail light lens survived. Only one emblem survived as well, Let me what you think.

[USMilitary]

Originally Posted by yelmer

do you have a picture of the gas cap ?

I'll be using the gas cap, Thanks

[USMilitary]

Originally Posted by l79m20

I'd be interested in the spare tire carrier if available and hardware for it.

I'm going to hang on the tire carrier. Thanks

[USMilitary]

Originally Posted by LostMy65

How's the floor mat?

I don' think it survived, but haven't torn the cab apart yet.

[USMilitary]

Originally Posted by ClemsonChevy

Interested in drivers wiper arm/blade if it matches the one you sold me for the passenger side.

driver side is a replacement, pass side is the same as you have.

[USMilitary]

Originally Posted by namdlo

Hey, I'm in the St. Louis area so I can pick up parts. Complete grill, heater assembly under dash, chrome trim behind upper doors, send me your price and we will go from there. Thanks

grille pic loaded, no trim on this truck except for sail panels, haven't got to the heater assembly yet.

[USMilitary]

Originally Posted by 19Chevy66

Hello Dave- wondering if the 8 lug rear end is coil or leaf spring type? I am interested if it is coil type. What shape is the panel behind the grill in? Prices on both too- thanks!

The 8 lug rear end is coil springs and trailing arms. The grille support panel was in good shape, but I'm going to use it. I will post a picture and price of the rear end after I get the bed removed today.

[namdlo]

The sail panel trim is what I meant. Thanks, just let me know on a package deal with grill, headlite bezels, heater box under dash and sail panel trim

[TBONE1964]

You are using this cab, yes? Do you have another cab and how if the area above the windshield? I am looking for a piece on the drivers side just above the windshield if you have a cab you are going to scrap.

I will try to find a photo and post with the section I need highlighted.

Thank you

[ClemsonChevy]

I will take the drivers vent window if the handle is good and not loose and the upper radiator bracket.

[USMilitary]

Originally Posted by wahl4m

hood looks like its got the slope /droop -typical at the back edge ! i bet if you look close it is rusty at front edge ? over priced !

To take your bet about rust in the front. Here are more up close pics.

By the way: Rule XII. It is against our policy for someone to post a complaint about a members price on whatever they are selling. If you don't like the price then skip it. Let it drop to the bottom on its own. They (potential buyers) will figure it out, why nobody is jumping on that particular item.

[USMilitary]

Another

[USMilitary]

Last

[USMilitary]

Originally Posted by TBONE1964

You are using this cab, yes? Do you have another cab and how if the area above the windshield? I am looking for a piece on the drivers side just above the windshield if you have a cab you are going to scrap.

I will try to find a photo and post with the section I need highlighted.

Thank you

I do have another cab I'm going to scrap and are welcome to whatever you need. I see it looks like left upper corner. How big of piece would you like me to cut out? I will make sure that location is in good condition tomorrow.

[LostMy65]

Originally Posted by USMilitary

Cab apart and the floor mat didn't survive.

Thanks for letting me know.

[USMilitary]

Originally Posted by USMilitary

I don' think it survived, but haven't torn the cab apart yet.

Cab is apart now and the floor mat didn't survive.

[LostMy65]

Originally Posted by USMilitary

Cab is apart now and the floor mat didn't survive.

Thanks for checking.

[USMilitary]

Originally Posted by namdlo

The sail panel trim is what I meant. Thanks, just let me know on a package deal with grill, headlite bezels, heater box under dash and sail panel trim

$150.00 plus the ride or come pick it up.

[USMilitary]

Originally Posted by 19Chevy66

Hello Dave- wondering if the 8 lug rear end is coil or leaf spring type? I am interested if it is coil type. What shape is the panel behind the grill in? Prices on both too- thanks!

Here are some pics of the rear end. Let me know what on the rear end your interested in.

[USMilitary]

Another.

[USMilitary]

Bed rails only one hole is out of round, no rust. 20.00 a rail or 100.00 for the set. (SCRAPED)

[USMilitary]

Wheels tubs no rust and square holes, but pretty dented up. Don't know if anyone needs them, but hate to scrap them since they aren't rusted out on the edges. 15.00 per plus ride. (SCRAPED)

[USMilitary]

Front bed panel, not too bad. A few holes rusted out and has a little bow to it. 20.00 plus ride. (SCRAPED)

[USMilitary]

Another

[TBONE1964]

Originally Posted by USMilitary

I do have another cab I'm going to scrap and are welcome to whatever you need. I see it looks like left upper corner. How big of piece would you like me to cut out? I will make sure that location is in good condition tomorrow.

Thank you,

Let me know what you have. I would say the cut should be about 2 to 3 inches on each side of the rot in my photo. I don't want it to big or it is a pain for you to ship.

By the way: The hood is one of the nicest ones that I have seen for the price. If it did not cost so much to ship, I would consider it. The droop in the middle is an easy repair. I know very well how hard it is to find one of these hoods that does not have front edge rot.

I appreciate your time, Thank you