1968 3/4 ton 4x4 Panel - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Fishbone · 11-10-2013, 07:23 PM

Quote:

Originally Posted by 68panelman

Man you are one lucky dog!!!, Like Tim said about the trim and all, that's one ultra rare beast, what are your plans for her?.

68panelman Thanks for the comment. I'm not real sure as to what I'm going to do with it yet. I may fix the brakes and clean the gas tank as this is all I can see that it needs to be able to drive. I have thought about putting it up for sale on Ebay just not 100% sure yet

68panelman · 11-27-2013, 10:36 AM

Your getting me worried here!!!, Any updates to report?

Bigdav160 · 11-27-2013, 02:13 PM

Give us first shot!

Fishbone · 11-27-2013, 10:40 PM

Sorry for the delays guys ! My dad passed away unexpected on the 14th and I've had a lot going on for the past week or so.

I do have a fresh battery in it now with a new fuel pump and it runs great! I need to flush the gas tank out and get started on the brakes.

68panelman · 11-28-2013, 10:27 AM

Sorry for your loss.

da-burb · 11-30-2013, 01:14 AM

Sorry to hear about your dad.

**special-K** · 11-30-2013, 09:27 AM

Boy,life is sure full of good and bad. Sorry to hear of your dad's passing. Had to be a tough Thanksgiving.Time heals,but that has yet to come.

Fishbone · 12-01-2013, 10:38 PM

Thanks for the kind words. My dad will surely be missed. I didn't get to fix the brakes today but I did get the oil changed today.

Hopefully next weekend I can get the brakes started. I might be able to start this week it just depends.

**Joesjunk** · 12-21-2013, 02:12 AM

Very cool panel!

**57NAPCO** · 01-09-2014, 11:36 PM

Did ya sell it? Or are ya gonna keep it...

**57NAPCO** · 01-09-2014, 11:37 PM

Double post

Fishbone · 01-10-2014, 07:56 AM

Haven't sold it yet. I've been sick with the crud and have had to work a lot of overtime at work lately, not to mention the cold wet weather. I plan on fixing the brakes real soon and then make my mind up.

K20chevy · 01-11-2014, 04:01 PM

Quote:

Originally Posted by Fishbone

Special K here is a little more info as to the color scheme. It was from the factory light blue color which you see in the pictures under the hood. It was then painted Blue with the white top By or For the rescue squad. After that what ever Fire dept painted it Red.

In the town I grew up in there was a 2 wheel drive panel painted the same way blue with a white top. I was too young to remember if it was 1/2 ton or 3/4 ton.

In the Next few days I will post up some more detailed pictures. If there are any specific pics anyone would like to see just let me know.

I also tried the PTO and Winch today and it works as it should!

This is so awesome! Can´t belive you found this! If you ever want to let it go, I want first dips! I´d love to have that in my collection!

**LockDoc** · 01-12-2014, 01:09 AM

-
Guys, just keep in mind if this turns into a for sale thread it will be closed and edited and that would be a shame because it is a great thread.

Thanks,
LockDoc

K20chevy · 01-12-2014, 07:43 AM

Quote:

Originally Posted by LockDoc

-
Guys, just keep in mind if this turns into a for sale thread it will be closed and edited and that would be a shame because it is a great thread.

Thanks,
LockDoc

yes, sorry about that, got too excited!

**Joesjunk** · 01-14-2014, 12:10 PM

Looking forward to the updates

jeffro308 · 01-15-2014, 09:27 AM

Awesome Panel!

Fishbone · 01-23-2014, 07:01 PM

Here is some more pics.

Fishbone · 01-23-2014, 07:04 PM

Here are some more.

vectorit · 01-24-2014, 12:24 AM

Man that is a solid looking rig!
Luckily you can get all the bright trim on the outside new from Mar-K now.

RustySunShine · 01-24-2014, 01:36 AM

That is a killer find!

K20chevy · 01-24-2014, 08:25 AM

Just awesome!!!

68panelman · 01-24-2014, 09:57 AM

I'm so freakin jealous!!!

K20chevy · 08-03-2015, 03:17 AM

Just wanted to let everyone know that I did buy the 68 K20 Panel from member Fishbone. Once I find the time to tear into it, I will start a build thread. But it will be a complete frame off resto and keeping it original. The only changes will be power steering and power brakes. Other than that, it´ll be back to the day when it was put into service.

I did manage to get pictures from the fire depatment while it was in service. I will post these in the build thread as well.

RANDY COX · 08-03-2015, 06:18 AM

Can't wait for this one to start. That thing is a beast..will be watching....
Posted via Mobile Device

11-27-2013, 10:36 AM	#27
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,455	Re: 1968 3/4 ton 4x4 Panel Your getting me worried here!!!, Any updates to report?

11-27-2013, 02:13 PM	#28
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: 1968 3/4 ton 4x4 Panel Give us first shot! __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe

11-27-2013, 10:40 PM	#29
Fishbone Registered User Join Date: Oct 2011 Location: Talladega alabama Posts: 49	Re: 1968 3/4 ton 4x4 Panel Sorry for the delays guys ! My dad passed away unexpected on the 14th and I've had a lot going on for the past week or so. I do have a fresh battery in it now with a new fuel pump and it runs great! I need to flush the gas tank out and get started on the brakes.

11-28-2013, 10:27 AM	#30
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,455	Re: 1968 3/4 ton 4x4 Panel Sorry for your loss.

11-30-2013, 01:14 AM	#31
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Re: 1968 3/4 ton 4x4 Panel Sorry to hear about your dad. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

11-30-2013, 09:27 AM	#32
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: 1968 3/4 ton 4x4 Panel Boy,life is sure full of good and bad. Sorry to hear of your dad's passing. Had to be a tough Thanksgiving.Time heals,but that has yet to come. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-01-2013, 10:38 PM	#33
Fishbone Registered User Join Date: Oct 2011 Location: Talladega alabama Posts: 49	Re: 1968 3/4 ton 4x4 Panel Thanks for the kind words. My dad will surely be missed. I didn't get to fix the brakes today but I did get the oil changed today. Hopefully next weekend I can get the brakes started. I might be able to start this week it just depends.

12-21-2013, 02:12 AM	#34
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: 1968 3/4 ton 4x4 Panel Very cool panel! __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

01-09-2014, 11:36 PM	#35
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,218	Re: 1968 3/4 ton 4x4 Panel Did ya sell it? Or are ya gonna keep it...

01-09-2014, 11:37 PM	#36
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,218	Re: 1968 3/4 ton 4x4 Panel Double post

01-10-2014, 07:56 AM	#37
Fishbone Registered User Join Date: Oct 2011 Location: Talladega alabama Posts: 49	Re: 1968 3/4 ton 4x4 Panel Haven't sold it yet. I've been sick with the crud and have had to work a lot of overtime at work lately, not to mention the cold wet weather. I plan on fixing the brakes real soon and then make my mind up.

01-12-2014, 01:09 AM	#39
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,378	Re: 1968 3/4 ton 4x4 Panel - Guys, just keep in mind if this turns into a for sale thread it will be closed and edited and that would be a shame because it is a great thread. Thanks, LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

01-14-2014, 12:10 PM	#41
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: 1968 3/4 ton 4x4 Panel Looking forward to the updates __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

01-15-2014, 09:27 AM	#42
jeffro308 Registered User Join Date: Jan 2014 Location: Peeltown, TX Posts: 43	Re: 1968 3/4 ton 4x4 Panel Awesome Panel!

01-23-2014, 07:01 PM	#43
Fishbone Registered User Join Date: Oct 2011 Location: Talladega alabama Posts: 49	Re: 1968 3/4 ton 4x4 Panel Here is some more pics. Attached Images



Register or Log In To remove these advertisements.

01-23-2014, 07:04 PM	#44
Fishbone Registered User Join Date: Oct 2011 Location: Talladega alabama Posts: 49	Re: 1968 3/4 ton 4x4 Panel Here are some more. Attached Images

01-24-2014, 12:24 AM	#45
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: 1968 3/4 ton 4x4 Panel Man that is a solid looking rig! Luckily you can get all the bright trim on the outside new from Mar-K now. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

01-24-2014, 01:36 AM	#46
RustySunShine Registered User Join Date: Oct 2013 Location: Port Richey Florida Posts: 53	Re: 1968 3/4 ton 4x4 Panel That is a killer find!

01-24-2014, 08:25 AM	#47
K20chevy Registered User Join Date: Oct 2012 Location: Pittsfield, ME Posts: 477	Re: 1968 3/4 ton 4x4 Panel Just awesome!!! __________________ 78 Chevy K20 Custom Deluxe, build: http://67-72chevytrucks.com/vboard/s...d.php?t=612104 68 Chevy K20 Panel truck, build: http://67-72chevytrucks.com/vboard/s...41#post7263441

01-24-2014, 09:57 AM	#48
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,455	Re: 1968 3/4 ton 4x4 Panel I'm so freakin jealous!!!

08-03-2015, 03:17 AM	#49
K20chevy Registered User Join Date: Oct 2012 Location: Pittsfield, ME Posts: 477	Re: 1968 3/4 ton 4x4 Panel Just wanted to let everyone know that I did buy the 68 K20 Panel from member Fishbone. Once I find the time to tear into it, I will start a build thread. But it will be a complete frame off resto and keeping it original. The only changes will be power steering and power brakes. Other than that, it´ll be back to the day when it was put into service. I did manage to get pictures from the fire depatment while it was in service. I will post these in the build thread as well. __________________ 78 Chevy K20 Custom Deluxe, build: http://67-72chevytrucks.com/vboard/s...d.php?t=612104 68 Chevy K20 Panel truck, build: http://67-72chevytrucks.com/vboard/s...41#post7263441

08-03-2015, 06:18 AM	#50
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Can't wait for this one to start. That thing is a beast..will be watching.... Posted via Mobile Device

Register or Log In To remove these advertisements.