NJ 700r4 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

beetle1960 · 09-11-2014, 12:36 PM

Quote:

Originally Posted by MidLifer

Sorry Beetle that's not enough to make me say yes.

counter offer? I dont need the driveline parts..

dbb1025 · 09-11-2014, 10:14 PM

I am out. Freight cost too much. Thanks for the patience.

**ScottH** · 09-12-2014, 12:21 AM

I could do $400 (budget prevents me from offering full price), need any parts that I could add?

**MidLifer** · 09-12-2014, 10:53 AM

Scott, $400 is good for me but I don't know how forum rules apply here. Beetle had put in a lower offer first, does he get to match your offer since he expressed interest earlier?

I work in Lawrenceville right off 95 so I could meet you kind of halfway between our home towns. I live a bit further south than Paul (88ironduke).

In terms of trades at this time, what I need is a Cable-x box or equivalent (Dakota Digital also makes one) and an Advance Adapters bellhousing for the NV4500 to enable me to use my mechanical clutch linkage with my 350. Probably a long shot if you have either of those.

beetle1960 · 09-12-2014, 11:41 AM

I don't know how the rules work either and I don't want to step on Scott since he made the first offer accepted, so I will get into line behind Scott should his deal fall apart. With that said, I will go 400.00 if you will strap to a pallet and load onto a truck that I schedule for pickup..

**ScottH** · 09-12-2014, 11:37 PM

Sorry guys, long day. I was interested in the trans for a possible future project, but if Beetle1960 needs it I will pass on it, can always find another if I do need one later.

Scott

beetle1960 · 09-13-2014, 12:47 AM

Midlifer, if you will accept $400.00 I'm in. Scott, thank you! my build is at a standstill for a Trans.

**MidLifer** · 09-13-2014, 09:17 AM

Beetle it's yours. Let's take the details offline. I will PM you with my phone number.

**ScottH** · 09-13-2014, 09:49 AM

Can u measure the drive shaft if Beetle doesn't need it? I do need one for a swb I'm working on.

Scott

**MidLifer** · 09-13-2014, 09:52 AM

The shaft is 41 3/4" as measured between the centers of the u-joint mount holes. It's marked "82-02 Camaro". I'll take $20 for it.

Here is a pic: https://drive.google.com/file/d/0B6u...it?usp=sharing

**ScottH** · 09-13-2014, 09:57 AM

thanks, unfortunately too short

beetle1960 · 09-13-2014, 11:00 AM

$ sent for Trans..

**MidLifer** · 09-13-2014, 01:36 PM

Got it.

09-11-2014, 10:14 PM	#27
dbb1025 Registered User Join Date: Jul 2013 Location: branford, connecticut Posts: 201	Re: 700r4 I am out. Freight cost too much. Thanks for the patience.

09-12-2014, 12:21 AM	#28
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 700r4 I could do $400 (budget prevents me from offering full price), need any parts that I could add? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

09-12-2014, 10:53 AM	#29
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: 700r4 Scott, $400 is good for me but I don't know how forum rules apply here. Beetle had put in a lower offer first, does he get to match your offer since he expressed interest earlier? I work in Lawrenceville right off 95 so I could meet you kind of halfway between our home towns. I live a bit further south than Paul (88ironduke). In terms of trades at this time, what I need is a Cable-x box or equivalent (Dakota Digital also makes one) and an Advance Adapters bellhousing for the NV4500 to enable me to use my mechanical clutch linkage with my 350. Probably a long shot if you have either of those.

09-12-2014, 11:41 AM	#30
beetle1960 Registered User Join Date: Aug 2013 Location: Hiram Ohio Posts: 619	Re: 700r4 I don't know how the rules work either and I don't want to step on Scott since he made the first offer accepted, so I will get into line behind Scott should his deal fall apart. With that said, I will go 400.00 if you will strap to a pallet and load onto a truck that I schedule for pickup.. __________________ 1953 Chevy 3100 1964 Chevy Impala 1966 Chevy El Camino 1970 Chevy C10 Fleet Long 1972 Chevy C10 Step long 1985 Chevy K10 Fleet Short

09-12-2014, 11:37 PM	#31
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 700r4 Sorry guys, long day. I was interested in the trans for a possible future project, but if Beetle1960 needs it I will pass on it, can always find another if I do need one later. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

09-13-2014, 12:47 AM	#32
beetle1960 Registered User Join Date: Aug 2013 Location: Hiram Ohio Posts: 619	Re: 700r4 Midlifer, if you will accept $400.00 I'm in. Scott, thank you! my build is at a standstill for a Trans. __________________ 1953 Chevy 3100 1964 Chevy Impala 1966 Chevy El Camino 1970 Chevy C10 Fleet Long 1972 Chevy C10 Step long 1985 Chevy K10 Fleet Short

09-13-2014, 09:17 AM	#33
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: 700r4 Beetle it's yours. Let's take the details offline. I will PM you with my phone number.

09-13-2014, 09:49 AM	#34
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 700r4 Can u measure the drive shaft if Beetle doesn't need it? I do need one for a swb I'm working on. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

09-13-2014, 09:52 AM	#35
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: 700r4 The shaft is 41 3/4" as measured between the centers of the u-joint mount holes. It's marked "82-02 Camaro". I'll take $20 for it. Here is a pic: https://drive.google.com/file/d/0B6u...it?usp=sharing

09-13-2014, 09:57 AM	#36
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 700r4 thanks, unfortunately too short __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

09-13-2014, 11:00 AM	#37
beetle1960 Registered User Join Date: Aug 2013 Location: Hiram Ohio Posts: 619	Re: 700r4 $ sent for Trans.. __________________ 1953 Chevy 3100 1964 Chevy Impala 1966 Chevy El Camino 1970 Chevy C10 Fleet Long 1972 Chevy C10 Step long 1985 Chevy K10 Fleet Short

09-13-2014, 01:36 PM	#38
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: 700r4 Got it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.