MO Parting out 67 long bed step side, 283 with 3 ott. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 12-13-2014, 05:25 PM

Quote:

Originally Posted by Justintime67

I'd be interested in the hood letters of they're not in to bad of shape.

PRICE REDUCED.... Hey Justin. Here they are. The H has the stud broken off, the rest of them are intact. They are just old driver quality, nothing special. I would do $17.00 shipped for the whole set if you can use them. Thanks, Fred.

**specialtyretail** · 12-13-2014, 05:26 PM

Quote:

Originally Posted by low&slow

You got anymore pics of the gauge cluster? do you know if the gauges work?

It is the three hole instrument cluster. Has idiot lights, not gauges. I do not know if it works or not. I will try to get some pics later this evening or Sunday. Thanks, Fred.

UP GRADE · 12-13-2014, 06:33 PM

Second on the ignition setup? Dose the key work for the door?

**specialtyretail** · 12-13-2014, 06:55 PM

The bezel is gone from the ignition switch, it is just sticking through the dash. The key does NOT fit the door, sorry. Thanks, Fred.

OutlawM92 · 12-13-2014, 07:24 PM

May be driving down to get the bench seat and the tailgate.. If the condition and price are all good of course. Let me know! Thanks

Nsanehotrodz · 12-13-2014, 07:38 PM

Is the cab for sale?

**specialtyretail** · 12-13-2014, 07:39 PM

Quote:

Originally Posted by jmader

Also interested in the seat belts, boots and the thermostat housing. What about the intake manifold and distributor? What are the casting numbers on those?

Let me get you some numbers and pics Sunday. I had errands today and the smoker took more of my time than I was expecting. Thanks, Fred.

**specialtyretail** · 12-13-2014, 07:40 PM

Quote:

Originally Posted by Nsanehotrodz

Is the cab for sale?

If you need it and can pull it, it is for sale. Thanks, Fred.

**specialtyretail** · 12-13-2014, 07:41 PM

Quote:

Originally Posted by OutlawM92

May be driving down to get the bench seat and the tailgate.. If the condition and price are all good of course. Let me know! Thanks

I will get you some pics Sunday. Where is Paw Paw Illinois? Thanks, Fred.

**specialtyretail** · 12-13-2014, 07:45 PM

Quote:

Originally Posted by too much stuff

Radio delete and seat belts?

Radio delete has a couple of sheet metal screws through it,,, dammit...

OutlawM92 · 12-13-2014, 07:47 PM

Quote:

Originally Posted by specialtyretail

I will get you some pics Sunday. Where is Paw Paw Illinois? Thanks, Fred.

Further than I remember, 7 hours NE of you.. Haha well that tailgate is small enough to ship! Pics sound good brother

**specialtyretail** · 12-13-2014, 07:50 PM

Yea, not really worth the trip. I appreciate you asking about it though. Thanks, Fred.

**too much stuff** · 12-13-2014, 08:19 PM

Quote:

Originally Posted by specialtyretail

Radio delete has a couple of sheet metal screws through it,,, dammit...

are the clips still on it?

**specialtyretail** · 12-13-2014, 08:25 PM

Quote:

Originally Posted by too much stuff

are the clips still on it?

I will look and see Sunday. Thanks, Fred.

**michael bustamante** · 12-13-2014, 08:30 PM

Any news on the valve covers? Scripted?
Hows the passenger ramhorn? Is it angled?

**specialtyretail** · 12-13-2014, 08:38 PM

Quote:

Originally Posted by michael bustamante

Any news on the valve covers? Scripted?
Hows the passenger ramhorn? Is it angled?

Sorry, missed replying to you on that. The covers are smooth, no cool scripts. I have not looked at the exhaust manifolds but if they are like most of them I run across, they will be cracked. I will try to check Sunday, the smoker took up more of my time today than I expected. Still babysitting it even as we speak. Thanks, Fred.

**michael bustamante** · 12-13-2014, 08:40 PM

No prob. Thanks for lettin me know.

**Todd68Chevy** · 12-13-2014, 08:47 PM

Fred do you have any 67 hub caps that are decent? The one I see in this picture looks pretty rough.

Condition and price for the head light grill hoops and the grill with hoops if you will hold till next spring when we meet up again. What is the condition of the core support and right front fender? Price?

Thanks

**specialtyretail** · 12-13-2014, 08:53 PM

Quote:

Originally Posted by Todd68Chevy

Fred do you have any 67 hub caps that are decent? The one I see in this picture looks pretty rough.

Condition and price for the head light grill hoops and the grill with hoops if you will hold till next spring when we meet up again. What is the condition of the core support and right front fender? Price?

Thanks

Hey Todd. That is the only hub cap, if you want to still call it that, on the truck. Let me try to get you some pics Sunday if I can at all. I think it has the typical battery acid rust like they all have,,, but I may have another one stuck back. I will let you know. Thanks, Fred.

**zicc1835** · 12-13-2014, 09:24 PM

Quote:

Originally Posted by zicc1835

Tail & back ups with the brackets and harness to 07981

Fred
these tails and back ups with .... and the fender emblems can you send pictures and price
thanks
Jess

**specialtyretail** · 12-13-2014, 09:43 PM

Quote:

Originally Posted by zicc1835

Fred
these tails and back ups with .... and the fender emblems can you send pictures and price
thanks
Jess

Hey Jess. Sure can. I should be able to do that Sunday. The day just got away from me. Thanks, Fred.

Nsanehotrodz · 12-13-2014, 10:23 PM

Quote:

Originally Posted by specialtyretail

If you need it and can pull it, it is for sale. Thanks, Fred.

Send me pics of the firewall gutter, under dash at seams, and around the windshield. Thanks

**zicc1835** · 12-13-2014, 11:04 PM

Quote:

Originally Posted by specialtyretail

Hey Jess. Sure can. I should be able to do that Sunday. The day just got away from me. Thanks, Fred.

thank you

**ScottH** · 12-14-2014, 01:08 AM

Fred, u might have missed my request, if u get a chance could u lmk?
Thanks
Scott

**specialtyretail** · 12-14-2014, 03:28 AM

Quote:

Originally Posted by ScottH

I'd be interested in the carb if 2 barrel, carb linkage, alternator brackets, and possibly exhaust manifolds.

Thanks
Scott

Hey Scott. Carburetor, linkage and the alternator brackets, $80.00 shipped for all of it. Thanks, Fred.

12-13-2014, 06:33 PM	#28
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: Parting out 67 long bed step side, 283 with 3 ott. Second on the ignition setup? Dose the key work for the door?

12-13-2014, 06:55 PM	#29
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: Parting out 67 long bed step side, 283 with 3 ott. The bezel is gone from the ignition switch, it is just sticking through the dash. The key does NOT fit the door, sorry. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

12-13-2014, 07:24 PM	#30
OutlawM92 Registered User Join Date: Aug 2013 Location: Clinton, IA Posts: 321	Re: Parting out 67 long bed step side, 283 with 3 ott. May be driving down to get the bench seat and the tailgate.. If the condition and price are all good of course. Let me know! Thanks __________________ 1969 C10 "Problem Child" 1981 C20 CCLB "Nightrain" "A good plan violently executed right now is far better than a perfect plan executed next week. Accept the challenges, so that you may feel the exhilaration of victory."

12-13-2014, 07:38 PM	#31
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Re: Parting out 67 long bed step side, 283 with 3 ott. Is the cab for sale? __________________ www.nsanehotrodz.com customerservice@nsanehotrodz.com 865-761-0460 Tennessee's #1 HotRod Shop!

12-13-2014, 07:50 PM	#37
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: Parting out 67 long bed step side, 283 with 3 ott. Yea, not really worth the trip. I appreciate you asking about it though. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

12-13-2014, 08:30 PM	#40
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Parting out 67 long bed step side, 283 with 3 ott. Any news on the valve covers? Scripted? Hows the passenger ramhorn? Is it angled? __________________ 1967custom

12-13-2014, 08:40 PM	#42
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Parting out 67 long bed step side, 283 with 3 ott. No prob. Thanks for lettin me know. __________________ 1967custom

12-13-2014, 08:47 PM	#43
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Parting out 67 long bed step side, 283 with 3 ott. Fred do you have any 67 hub caps that are decent? The one I see in this picture looks pretty rough. Condition and price for the head light grill hoops and the grill with hoops if you will hold till next spring when we meet up again. What is the condition of the core support and right front fender? Price? Thanks __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

12-14-2014, 01:08 AM	#49
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting out 67 long bed step side, 283 with 3 ott. Fred, u might have missed my request, if u get a chance could u lmk? Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.