Bad Idea

[68Gold/white]

What headers are those???
If you still have the bed off, I'd like to see more pictures of the exhaust system
Thanks!!!

[RRR18]

Originally Posted by 68Gold/white

What headers are those???
If you still have the bed off, I'd like to see more pictures of the exhaust system
Thanks!!!

They are Flowtech headers for a '69 Chevelle. Fit is great but small flanges. I'd love to show you some pics of the exhaust but all I got as of now is a bare frame.

[jmking9]

Nice looking project! What kind of air setup are you thinking about?

[Possmguts]

Originally Posted by 68Gold/white

What headers are those???
If you still have the bed off, I'd like to see more pictures of the exhaust system
Thanks!!!

Go down to post #14 and you can see the exhaust... I dont think Ive ever see it ran like that before... pretty crazy stuff. I dont see any mufflers.. it must have been pretty loud

[RRR18]

Originally Posted by jmking9

Nice looking project! What kind of air setup are you thinking about?

Thanks.
For most on this site I'm kinda leaning towards a "basic" air ride setup. Stock crossmembers with a small notch in rear is what it has now and all it will have. IF it goes to air I always wanted to keep stock inner fenders and a stock bed floor so that limits the air to a point.

[RRR18]

Originally Posted by 68Gold/white

What headers are those???
If you still have the bed off, I'd like to see more pictures of the exhaust system
Thanks!!!

Ah Ha! I found a pic of how I had the exhaust routed before. It won't be like this after. My exhaust guy got a little happy with his bender. Wasn't loud for me.

[Possmguts]

Originally Posted by RRR18

Ah Ha! I found a pic of how I had the exhaust routed before. It won't be like this after. My exhaust guy got a little happy with his bender. Wasn't loud for me.

haha, yeah he must have just got a new bender.
How far have you gotten now? Any updates?

[rydeordie]

What gas tank is that?

[RRR18]

Originally Posted by Possmguts

haha, yeah he must have just got a new bender.
How far have you gotten now? Any updates?

Here is your update.....it's too damn cold!!!
Haha...no updates at all. I haven't even been out to look at it hardly. Takin it apart was the easy and fast part. Now I'm back to work after the holidays so now it'll go pretty slow. Next step is to get the frame ready for the powdercoater.

[RRR18]

Originally Posted by rydeordie

What gas tank is that?

Blazer tank or a "conversion" tank I don't know what proper wording would be. 21 gallon think it came from Brothers. That'll be changed because I don't like the way the top sits a little above the top of the frame rails. I don't want to notch a new crossmember to go over it. The old crossmember (whatever it was "homemade") was actually moved to the rear of the truck one or two bedside holes back to clear the tank.

[nlped]

Cool build, I'm going to follow along...

[68Gold/white]

Originally Posted by RRR18

Ah Ha! I found a pic of how I had the exhaust routed before. It won't be like this after. My exhaust guy got a little happy with his bender. Wasn't loud for me.

Thanks for the pic.
My good friend had a 66 LWB, small block 400, 3.42 gear, muncie m20, front disc brakes, ran better than any pickup I'd ever ridden in, and most cars!!!

He was contemplating exhaust system changes.

My thought was to get the pipes off the headers routed outside the frame, then run a straight pipe straight to the back (w/ muffler included).

I added up the thicknesses of the rear coil springs to determine how low the pipe could be hung (IF, the rear springs ever did fully compress).

He built the system, had to cut a little off of the cab sheet metal that hangs in the way down there, no biggie...mind you this was 25 years ago when muffler selection was minimal. At first he ran a single 2-1/2" sonic turbo on each side...they were too loud, so he put an additional same sonic turbo on each side....an awesome sound, not too loud...
He had a crossover pipe a few inches behind the header collectors...

I've never seen a similar system...

[slowcpe]

Nice start so far. I'm with ya on the cold. I have nothing going on today and want to head out to the garage but don't feel like going through $100 in kerosene and work on ice cold metal.

Also totally agree on the wipers. I got a buddy that can take tem off in seconds. Me: after about 10 minutes I contemplate busting out the grinder and cutoff wheel.

[knomadd]

I'm in! Seemed like a quick disassembly. Looks like a nice start.

[RRR18]

Originally Posted by slowcpe

Nice start so far. I'm with ya on the cold. I have nothing going on today and want to head out to the garage but don't feel like going through $100 in kerosene and work on ice cold metal.

Also totally agree on the wipers. I got a buddy that can take tem off in seconds. Me: after about 10 minutes I contemplate busting out the grinder and cutoff wheel.

Ya cold just flat out sucks.
It's ok though probably only 4 more months of it.

[RRR18]

Originally Posted by knomadd

I'm in! Seemed like a quick disassembly. Looks like a nice start.

Always comes apart fast.
The going back together part and the willingness to spend money.....different story.
I tried to get it apart before weather got terrible and before I went back to work after the holidays.

[Possmguts]

Originally Posted by slowcpe

Also totally agree on the wipers. I got a buddy that can take tem off in seconds. Me: after about 10 minutes I contemplate busting out the grinder and cutoff wheel.

LOL I was SO close to doing that...

[68Gold/white]

Originally Posted by RRR18

Ya cold just flat out sucks.
It's ok though probably only 4 more months of it.

Two months here, maybe...

[Bennett68C10]

Nice build, subscribed!

[RRR18]

Frame off to powder coater today.
I was gonna take a pic of the frame in the bed of my truck but knew you guys would make fun of me. That damn thing was hangin out boy! Probably looked weird goin down the road. Wasn't really as heavy as I thought it'd be either. I loaded it myself and they unloaded it with 6 guys coulda used them at home. It was an experience but I had to use what I had. Probably should've planned a little better. I'll be borrowing a trailer to get it home so I don't freak out the girlfriend more.

[RRR18]

Also ordered some parts today. I'm ordering things little at a time. I'm not made of money.
Travis at Pro Performance is top notch. Spent a ton of time on the phone with me and answered all my questions and concerns.https://www.azproperformance.com/home.php

[Possmguts]

Originally Posted by RRR18

Frame off to powder coater today.
I was gonna take a pic of the frame in the bed of my truck but knew you guys would make fun of me. That damn thing was hangin out boy! Probably looked weird goin down the road. Wasn't really as heavy as I thought it'd be either. I loaded it myself and they unloaded it with 6 guys coulda used them at home. It was an experience but I had to use what I had. Probably should've planned a little better. I'll be borrowing a trailer to get it home so I don't freak out the girlfriend more.

Whos doing it? Im waiting on a quote from Pen Ohio Motorsports in Hubbard. The guy is supposed to call tomorrow.

[RRR18]

Originally Posted by Possmguts

Whos doing it? Im waiting on a quote from Pen Ohio Motorsports in Hubbard. The guy is supposed to call tomorrow.

http://www.fbrindustries.com/home.html
Nice guy. Had about 6 younger guys workin in there. He did my buddies tube chassis for his car and it came out nice so I chose to use him. He quoted me close to 500.

[Possmguts]

Oh and are you having it done as a completed frame with all cross members and brackets still on it?

[RRR18]

Originally Posted by Possmguts

Oh and are you having it done as a completed frame with all cross members and brackets still on it?

Frame with crossmembers. Told me a week or so. I'm in no hurry. He is subbing out the blasting and then coating it there.