Will Turn-Downs make my exhaust louder? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LOHRTBT · 08-22-2003, 09:56 AM

Quote:

Originally posted by N2TRUX
You don't have to have a full exhaust. You can turn it out toward the side.

Just because you have a bridge, and a cut bed, doesn't mean you can't run an exhaust out the back. It can be done....

Damn!! That makes me wet!! lol

**N2TRUX** · 08-22-2003, 10:52 AM

Quote:

Originally posted by LOHRTBT
Damn!! That makes me wet!! lol

That's a little more than I needed to know. Heres one more from the engine...

**N2TRUX** · 08-22-2003, 10:55 AM

Ok, so back to the exhaust pics. You can't tell me your rear end is going to be more crowded than this is. The point is, it CAN be done. You just have to want it done bad enough....

gldevall · 08-22-2003, 11:29 AM

What kind of engine is that?

loweredd · 08-22-2003, 11:52 AM

I would love to have it done up nice like that, but NO ONE around here will do it. Either it's lazyness(another side effect of hunger) or they just plain suck.

jimfulco · 08-22-2003, 03:16 PM

Wouldn't you really rather have a Buick?

TIMSPEED · 08-22-2003, 07:42 PM

Quote:

Originally posted by gldevall
What kind of engine is that?

Looks to be a Buick 350 with a custom sheetmetal intake with Fuel Injection AND a S/C...what I wanna know, is what kinda CAR is that?! (It sorta looks like a wildcat..but sorta not.)

**N2TRUX** · 08-22-2003, 09:59 PM

Quote:

Originally posted by TIMSPEED
Looks to be a Buick 350 with a custom sheetmetal intake with Fuel Injection AND a S/C...what I wanna know, is what kinda CAR is that?! (It sorta looks like a wildcat..but sorta not.)

That's a good guess, but remember Buick and Olds big block motors are decieving. They don't have the same HUGE head that the Chevy big block does. Here's the details....

Engine:
455 Buick
TA Performance Stage 2 Street Eliminator Aluminum Heads
TA Performance Hydraulic Cam - .542/.550 lift; 238/248 duration; 112 lobe center
TA Performance Forged Rods
JE Pistons 8.5:1
Accel Gen VII electronic fuel injection
F-1 Procharger supercharger from ATI
Intake manifold, headers, exhaust, motor mounts, supercharger intake tubes and all brackets – hand fabricated by Ryan Butler

Just in case you want the rest of the story, here's a link....

Baer Brakes Gallery

bagged81 · 08-24-2003, 12:55 AM

Quote:

Originally posted by loweredd
off topic, but Jeff, how big of a notch did you put in?

I made it and did not ever really measure it. The axle it able to be submerged completely into the fram so I'd say its about 4-5". *shrugs*

Just for the record, my exhaust is at 45 degrees, not straight down. I just made my old exhaust work. Its only temporary though.

Well temporary for 4 or 5 years.

N2TRUX, now that is a car.

gldevall · 08-24-2003, 04:18 PM

Here's a pic of mine

gldevall · 08-24-2003, 04:19 PM

And the clearance of the headers.

08-22-2003, 11:29 AM	#29
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	What kind of engine is that? __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

08-24-2003, 04:18 PM	#35
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Here's a pic of mine Attached Images __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

08-24-2003, 04:19 PM	#36
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	And the clearance of the headers. Attached Images __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

08-22-2003, 10:55 AM	#28
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Ok, so back to the exhaust pics. You can't tell me your rear end is going to be more crowded than this is. The point is, it CAN be done. You just have to want it done bad enough....

08-22-2003, 11:52 AM	#30
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	I would love to have it done up nice like that, but NO ONE around here will do it. Either it's lazyness(another side effect of hunger) or they just plain suck.

08-22-2003, 03:16 PM	#31
jimfulco Registered User Join Date: May 2003 Location: Shreveport LA Posts: 3,170	Wouldn't you really rather have a Buick?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.