Project 68 k10 LWB..aka "The Hulk" - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**First c10** · 02-20-2015, 12:59 AM

Finally got the warn locking hubs installed. Looks great can't wait to see it installed on the truck.

**First c10** · 02-20-2015, 01:00 AM

Another front axle picture

DWilbur · 02-20-2015, 03:00 AM

you are moving fast on this project. can I drop off my front axel for you to rebuild.

**First c10** · 02-20-2015, 01:48 PM

you do body work?? we can trade!!

msgross · 02-21-2015, 08:37 PM

nice project... interested to see if you have issues with the LS and the front axle. Are you doing any lift? If not then you might need a custom crossmember under the engine...

DIY4x.com has some neat offroad parts, as well as Offroad design... I have a 68 k-10 shortbed but opted to keep the original engine and tranny since it's a 327...

**First c10** · 02-21-2015, 11:44 PM

Thanks msgross Funny you mention lift. The 4"TC all spring lift came in Friday. I also had ordered rear shackles and front hangers from diy4x.

**First c10** · 02-21-2015, 11:49 PM

Basketball has ended for my son so now I have him back to work on the truck. Here he is painting the pan. Well at least on the passenger side. I am thinking about putting a cam in this motor so I decided not to assemble the front assessory drive. Anyone tell me why I can only attach 1 photo per post?

msgross · 02-22-2015, 09:11 AM

Are you using an Ipad or phone to post the pics? I found that it only allowed 1 pic while doing that.

I recommend a photobucket account, then you can upload all of your pics and then just post the IMG link to those pics. Much faster and you have your pics online forever in a central location. Just don't move them around and rename folders because it will screw up your original link.

**First c10** · 02-22-2015, 04:11 PM

I used to have a photobucket account. Probably still do I will need to look into it. And yes I am using iPhone and iPad to post because my phone and pad are clouded so I don't have to transfer photos.

Bladeboy1998 · 02-22-2015, 05:53 PM

Yeah I use photo bucket on my android. So much easier. Even easier of you turn on auto backup and then you don't have to manually move them.

**CanadianK10** · 02-23-2015, 10:21 PM

Very nice project, was there anything special you had to specify to Tuff Country for the lift springs? Would like to lift my '67 in the future.

Thanks

**First c10** · 02-24-2015, 12:53 PM

CanadianK10,
Below is a link to a thread I started before I started my build thread regarding the lift and spring issues I was facing . Hope this helps
Scott

68 axle swap and lift

**CanadianK10** · 02-24-2015, 08:33 PM

Thanks for the help Scott, I really apprieciate it

Looking forward to updates on this project.

- Adam

**First c10** · 02-25-2015, 01:55 AM

No problem Adam.

So I was searching Craigslist a few weeks ago and found a guy that had a set of aluminum 15x10 wheels. They looked like the original alcoa forged wheels. I called and met up with him and yep they were the original Alcoa wheel but the guy had eagle center caps. I picked them up for $250. Here is a picture of a couple of them

7dee2 · 02-25-2015, 11:37 AM

Nice score!

**First c10** · 02-25-2015, 11:38 PM

The sending unit for the 31 gallon suburban tank came in. I went to install the Walbro pump but the screen and the wiring harness plug is different si looks like I need to find the Walbro plug and a screen that fits. I will post a few more pictures

**First c10** · 02-25-2015, 11:40 PM

This is the pump installed on the discharge port.

swamp rat · 02-26-2015, 01:09 AM

I must agree, nice score on the wheels!

Nitis · 02-28-2015, 07:45 PM

Subscribed

1972RedNeck · 02-28-2015, 09:40 PM

Quote:

Originally Posted by Nitis

Subscribed

Same here.

**First c10** · 03-01-2015, 01:16 AM

Well...I received some new part yesterday but the valve springs are back ordered from summit for a week. Kind of excited to actually put a cam in an ls engine. It's a Comp cams xr259hr. Picture is upside down but you get the idea.

**First c10** · 03-01-2015, 01:24 AM

Started on the wiring. This is after 1 hr of trying to de-pin and not tear up the harness. The last one I did I completly removed the loom and then tried to re loom after I completed the wiring. So this time I desided to try and not tear up the loom since the ECM will be in the stock location.
Funny how all this work and I haven't touch the truck yet.

**First c10** · 03-04-2015, 02:48 PM

Got the rubber for the road yesterday. They are 33/12.50-15 Dick Cepek Mud Country's they are getting installed on the Alcoa's today. Will post picture when I get them.

msgross · 03-04-2015, 07:40 PM

Nice tires..

**First c10** · 03-04-2015, 09:46 PM

My son took the pictures

02-20-2015, 12:59 AM	#26
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" Finally got the warn locking hubs installed. Looks great can't wait to see it installed on the truck. Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

02-20-2015, 01:00 AM	#27
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" Another front axle picture Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

02-20-2015, 03:00 AM	#28
DWilbur Registered User Join Date: Aug 2013 Location: San Jose Ca Posts: 965	Re: Project 68 k10 LWB..aka "The Hulk" you are moving fast on this project. can I drop off my front axel for you to rebuild.

02-20-2015, 01:48 PM	#29
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" you do body work?? we can trade!! __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

02-21-2015, 08:37 PM	#30
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Project 68 k10 LWB..aka "The Hulk" nice project... interested to see if you have issues with the LS and the front axle. Are you doing any lift? If not then you might need a custom crossmember under the engine... DIY4x.com has some neat offroad parts, as well as Offroad design... I have a 68 k-10 shortbed but opted to keep the original engine and tranny since it's a 327... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-21-2015, 11:44 PM	#31
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" Thanks msgross Funny you mention lift. The 4"TC all spring lift came in Friday. I also had ordered rear shackles and front hangers from diy4x. Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

02-21-2015, 11:49 PM	#32
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" Basketball has ended for my son so now I have him back to work on the truck. Here he is painting the pan. Well at least on the passenger side. I am thinking about putting a cam in this motor so I decided not to assemble the front assessory drive. Anyone tell me why I can only attach 1 photo per post? Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

02-22-2015, 09:11 AM	#33
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Project 68 k10 LWB..aka "The Hulk" Are you using an Ipad or phone to post the pics? I found that it only allowed 1 pic while doing that. I recommend a photobucket account, then you can upload all of your pics and then just post the IMG link to those pics. Much faster and you have your pics online forever in a central location. Just don't move them around and rename folders because it will screw up your original link. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-22-2015, 04:11 PM	#34
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" I used to have a photobucket account. Probably still do I will need to look into it. And yes I am using iPhone and iPad to post because my phone and pad are clouded so I don't have to transfer photos. __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

02-22-2015, 05:53 PM	#35
Bladeboy1998 Registered User Join Date: Nov 2014 Location: Toledo Ohio Posts: 520	Re: Project 68 k10 LWB..aka "The Hulk" Yeah I use photo bucket on my android. So much easier. Even easier of you turn on auto backup and then you don't have to manually move them.

02-23-2015, 10:21 PM	#36
CanadianK10 Active Member Join Date: Nov 2013 Location: Goderich Ontario Posts: 123	Re: Project 68 k10 LWB..aka "The Hulk" Very nice project, was there anything special you had to specify to Tuff Country for the lift springs? Would like to lift my '67 in the future. Thanks __________________ 1967 K10 292, SM65 Transmission & NP205 Transfer Case My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=605048

02-24-2015, 12:53 PM	#37
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" CanadianK10, Below is a link to a thread I started before I started my build thread regarding the lift and spring issues I was facing . Hope this helps Scott 68 axle swap and lift __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

02-24-2015, 08:33 PM	#38
CanadianK10 Active Member Join Date: Nov 2013 Location: Goderich Ontario Posts: 123	Re: Project 68 k10 LWB..aka "The Hulk" Thanks for the help Scott, I really apprieciate it Looking forward to updates on this project. - Adam __________________ 1967 K10 292, SM65 Transmission & NP205 Transfer Case My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=605048

02-25-2015, 01:55 AM	#39
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" No problem Adam. So I was searching Craigslist a few weeks ago and found a guy that had a set of aluminum 15x10 wheels. They looked like the original alcoa forged wheels. I called and met up with him and yep they were the original Alcoa wheel but the guy had eagle center caps. I picked them up for $250. Here is a picture of a couple of them Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

02-25-2015, 11:37 AM	#40
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,984	Re: Project 68 k10 LWB..aka "The Hulk" Nice score! __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2



Register or Log In To remove these advertisements.

02-25-2015, 11:38 PM	#41
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" The sending unit for the 31 gallon suburban tank came in. I went to install the Walbro pump but the screen and the wiring harness plug is different si looks like I need to find the Walbro plug and a screen that fits. I will post a few more pictures Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

02-25-2015, 11:40 PM	#42
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" This is the pump installed on the discharge port. Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

02-26-2015, 01:09 AM	#43
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Project 68 k10 LWB..aka "The Hulk" I must agree, nice score on the wheels! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

02-28-2015, 07:45 PM	#44
Nitis Registered User Join Date: Apr 2014 Location: NOR-CAL Posts: 1,134	Re: Project 68 k10 LWB..aka "The Hulk" Subscribed

03-01-2015, 01:16 AM	#46
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" Well...I received some new part yesterday but the valve springs are back ordered from summit for a week. Kind of excited to actually put a cam in an ls engine. It's a Comp cams xr259hr. Picture is upside down but you get the idea. Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

03-01-2015, 01:24 AM	#47
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" Started on the wiring. This is after 1 hr of trying to de-pin and not tear up the harness. The last one I did I completly removed the loom and then tried to re loom after I completed the wiring. So this time I desided to try and not tear up the loom since the ECM will be in the stock location. Funny how all this work and I haven't touch the truck yet. Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

03-04-2015, 02:48 PM	#48
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" Got the rubber for the road yesterday. They are 33/12.50-15 Dick Cepek Mud Country's they are getting installed on the Alcoa's today. Will post picture when I get them. Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

03-04-2015, 07:40 PM	#49
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Project 68 k10 LWB..aka "The Hulk" Nice tires.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

03-04-2015, 09:46 PM	#50
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" My son took the pictures Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

Register or Log In To remove these advertisements.