AZ Cabs for parts/pieces

[67chevy4x4c]

Yes I need the whole kick panel all the way up to the inter cowl and 15 inchs of the inter cowl

[Ol 67 C10]

Originally Posted by t korinek

Here's the spot where the pedal mounts, its solid $30 + shipping, how big of an area do you need?
Rear small glass is cracked, I have a new clear one for $50 + shipping

I only need like a little 6"x6" piece with the 2 studs on the floorpan. I'll get a measurement and a pic of what I need tomorrow.

[swamp rat]

The pictures you posted look good, whats the charge??

EDIT: Sorry i missed the post about the price. i'm not sure about size restrictions for UPS. no i cant ship to a business, only home or a PO Box..

If it came down to it, just the top portion where i painted your pic that includes the inner section to the seam just above the dome lite, and for the bottom i could settle for the window down to the tank mount hold down bolt holes so i can get that inside piece. I hope that makes sense.. I'll try some more art work in a sec.

[swamp rat]

Will this make it easier to ship? can you give me an idea how much shipping would be?

[t korinek]

Yes I'm sure that would be cheaper to ship
I'll check tomorrow

[preacher anthony]

Picture #12, the white dash, can you price how much for the radio, ashtray, heater control area. My radio area has been cut. Shipping to 28372. Thanks

[67chevy4x4c]

Is the kick panel and inter cowl for sell let me know much shipped to Bartley wva 24813

[t korinek]

preacher anthony, I cut another dash out that was better than the white one, I'll post a pic of it $25 + shipping

67chevy4x4c can you outline the area you need on one of my pics?? Thanks

[swamp rat]

Originally Posted by t korinek

Yes I'm sure that would be cheaper to ship
I'll check tomorrow

Let me know what ya find out, will the price drop a little being as the lower part is much smaller now?

[67chevy4x4c]

this is what I need from the 67 cab

[t korinek]

swamp rat how about $40 + shipping for those 2 pieces?

preacher anthony pic of the dash cut out


67chevy4x4c Will this work? ( last pic)

[t korinek]

A couple more pics of the inner kick panel area, some of it was cut out at the top, when I cut the dash out of it $35 + shipping

[michael bustamante]

did you ever get a chance to go over the pics that i sent you for the floor and driver kick panal patch i need?

[swamp rat]

Originally Posted by t korinek

swamp rat how about $40 + shipping for those 2 pieces?

That works!

[t korinek]

Michael, Heres what I have available, they are both pretty decent, there is some rust in the gap where the floor meets the kick panel $40 + shipping
Let me know if either one will work for you.
Thanks

[michael bustamante]

no i need a solid piece but thank you anyways

[67chevy4x4c]

yes that is what I need I need the whole kick panel and 15 inchs of the inter cowl I have it marked in the pic in red thanks let me know how much for the parts and shipping to 11 Lancaster dr bartley 24813 Thanks

[67chevy4x4c]

Is the floor board in the cab corners good if so how much for both left and right

[preacher anthony]

Thanks, how much for the dash cut out and shipping?

[t korinek]

Shipping PM sent to swamp rat.

preacher anthony shipping would be $21 for that dash cut out, it is easiest to install it cut the way it is, I could cut it down small enough to fit in a med flat rate USPS box & it could ship for $11.30

67 chevy4x4c $40 for the cowl area + shipping will probably be at least $40 for a piece that big, cab corner floor boards $25 each & would have to know how big of area you need.
Thanks,
Tom

[preacher anthony]

Thanks, but I will have to pass on the radio cut out for now. Issue with my truck I have to address.

[67chevy4x4c]

The cab corner patch is 12x12 inchs pm me the total for ever thing shipping and all and your info and pay you for it all

[67chevy4x4c]

Did you get the parts cut out and find out the shipping?

[bean]

Did that piece from below the rear window sell?

[zicc1835]

pm sent