KS parting a 71 gmc sierra grander C10 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**29od1** · 03-19-2015, 07:31 AM

Quote:

Originally Posted by teeitup

David, mirrors are 73-80 style. Glove box door is $40
Thanks Randy

Randy,
I'll pass on the mirrors then and take the GB door.
Thanks,
David

teeitup · 03-19-2015, 08:09 AM

1968aj, I think I have the motor sold, I will find out today. The steering wheel is the replacement wheel that they put on these years, its actually a 73 and up wheel. $15 plus shipping on it

Mapearso, I'll see if I have any extras out there, I don't like to split up a set

Pat, I will get pics and a quote tonight

David, glovebox door yours

Thanks Randy

teeitup · 03-19-2015, 08:59 AM

Mike, mirror is foggy, sorry

Kevin, emblems are not bad

**DANTIP** · 03-19-2015, 09:00 AM

Randy,

Here is a short list of my needs.
1) Oil-pressure line firewall grommet.
2) Firewall grommet located just above trans dip stick.
3) Vacuum controlled air vent parts with screws for passenger side kick panel vent.
4) Vacuum pod assembly located just above the blower motor (near hood spring). I need the vacuum pod, round shaft that connects to the firewall part, the support bracket and screws that fasten it to the firewall edge.
5) The clamp/bracket that holds the refrigerant lines to the battery tray.

Thx!! Dan

**zicc1835** · 03-19-2015, 09:09 AM

Randy ill take the wing windows pending closer Pics and the AC center vent if its all metal no rush on my end
thanks
Jess

**davischevy** · 03-19-2015, 10:02 AM

Put me in line for the glove box door.

Thanks
Larry

bronze 72 super · 03-19-2015, 11:21 AM

Randy, thanks anyways for checking. Mike.

**undertaker72** · 03-19-2015, 12:03 PM

Randy I'll take the emblems put in pile , do you have a inside price only for a stove pipe assy the price next to head that clam. Shells around manifold don't take apart good pair just trying to find inner half thanks kevin

teeitup · 03-19-2015, 12:45 PM

Dan, when I get to parting this truck I will see how all that stuff is for you

Jess, I'll get pics of wings, they have some light pitting but not bad

Larry, its sold, sorry

Mike, no problem, your other parts are mailed today

Kevin, I'll look on inside piece of heat shield. Other parts are yours

Thanks Randy

muckmuck · 03-19-2015, 12:50 PM

How are the front bumper outer brackets?

Mapearso · 03-19-2015, 02:51 PM

Quote:

Originally Posted by teeitup

Mapearso, I'll see if I have any extras out there, I don't like to split up a set

Thanks Randy

OK thanks Randy. Standing by

teeitup · 03-19-2015, 07:43 PM

muckmuck, they are bent

mapearso, Mark, sorry no spares right now

Jess, pics

teeitup · 03-19-2015, 07:43 PM

they need cleaned up, one inner seal is weathered, see pic above. They both have tinted windows but one is not original. They have some light pitting, its hard to get pics of that

teeitup · 03-19-2015, 07:46 PM

pat english, they need waxed up, I forgot to get pic of hood latch

teeitup · 03-19-2015, 07:47 PM

Randy pics
7028212
7041208
7043250

Rkansasboy · 03-19-2015, 09:27 PM

randy how about rear bumper and brackets??

**Razorbacker** · 03-19-2015, 09:30 PM

Randy, does the cargo light, harness, and switch go with the cab?

Thanks,
Tony

**zicc1835** · 03-19-2015, 09:35 PM

Quote:

Originally Posted by teeitup

they need cleaned up, one inner seal is weathered, see pic above. They both have tinted windows but one is not original. They have some light pitting, its hard to get pics of that

Randy
ill take them please LMK how you want me to pay you
thanks
Jess

Lerch1145 · 03-19-2015, 09:38 PM

You have four hub caps? See one on the floor.

NTIMID8R · 03-19-2015, 09:43 PM

Looking for front sway bar with all brackets and mounting hardware. Price with shipping to 38680 ??

Put me in line 3rd on glovebox door.

Thanks

teeitup · 03-19-2015, 09:54 PM

Rkansasboy, its driver condition, $30 picked up

Tony, I'll check condition of it

Jess, I will pm you

Lerch1145, its a ford hubcap. No other hubcaps right now

NTIMID8R, I have one setup out there, one of the frame brackets needs straightened. It will also need new rubbers. $75 shipped

Thanks Randy

NTIMID8R · 03-19-2015, 10:21 PM

Randy, I'll take the sway bar and mounting hardware for $75 shipped. What shape are the wiper arms & blades and are they OEM? Also the left side a/c vent ball dash mount complete with retainer on back of it. Pics and price please also to 38680. Please pm payment info.

Bslifka · 03-19-2015, 11:56 PM

How much for the steering column Shipped To 73130

Thanks,
boris

**DeadheadNM** · 03-20-2015, 12:48 AM

Randy any chance the floor pan would yield usable patches for inner rockers? Could also use a patch piece for the lower portion of the LH kick panel where it meets the floor pan. Thanks, Pete

pat english · 03-20-2015, 02:17 AM

Quote:

Originally Posted by teeitup

pat english, they need waxed up, I forgot to get pic of hood latch

No problem.ill clean them up.I dont need a pic of the latch.pm me your pay pal and ill send the cash.

03-19-2015, 08:09 AM	#27
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 gmc sierra grander C10 1968aj, I think I have the motor sold, I will find out today. The steering wheel is the replacement wheel that they put on these years, its actually a 73 and up wheel. $15 plus shipping on it Mapearso, I'll see if I have any extras out there, I don't like to split up a set Pat, I will get pics and a quote tonight David, glovebox door yours Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2015, 08:59 AM	#28
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 gmc sierra grander C10 Mike, mirror is foggy, sorry Kevin, emblems are not bad Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2015, 09:00 AM	#29
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,888	Re: parting a 71 gmc sierra grander C10 Randy, Here is a short list of my needs. 1) Oil-pressure line firewall grommet. 2) Firewall grommet located just above trans dip stick. 3) Vacuum controlled air vent parts with screws for passenger side kick panel vent. 4) Vacuum pod assembly located just above the blower motor (near hood spring). I need the vacuum pod, round shaft that connects to the firewall part, the support bracket and screws that fasten it to the firewall edge. 5) The clamp/bracket that holds the refrigerant lines to the battery tray. Thx!! Dan

03-19-2015, 09:09 AM	#30
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,316	Re: parting a 71 gmc sierra grander C10 Randy ill take the wing windows pending closer Pics and the AC center vent if its all metal no rush on my end thanks Jess __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557 Last edited by zicc1835; 03-19-2015 at 09:13 AM. Reason: more and more

03-19-2015, 10:02 AM	#31
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: parting a 71 gmc sierra grander C10 Put me in line for the glove box door. Thanks Larry __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

03-19-2015, 11:21 AM	#32
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: parting a 71 gmc sierra grander C10 Randy, thanks anyways for checking. Mike.

03-19-2015, 12:03 PM	#33
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: parting a 71 gmc sierra grander C10 Randy I'll take the emblems put in pile , do you have a inside price only for a stove pipe assy the price next to head that clam. Shells around manifold don't take apart good pair just trying to find inner half thanks kevin

03-19-2015, 12:45 PM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 gmc sierra grander C10 Dan, when I get to parting this truck I will see how all that stuff is for you Jess, I'll get pics of wings, they have some light pitting but not bad Larry, its sold, sorry Mike, no problem, your other parts are mailed today Kevin, I'll look on inside piece of heat shield. Other parts are yours Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2015, 12:50 PM	#35
muckmuck Junior Member Join Date: Apr 2005 Location: Henderson, NV Posts: 329	Re: parting a 71 gmc sierra grander C10 How are the front bumper outer brackets?

03-19-2015, 07:43 PM	#37
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 gmc sierra grander C10 muckmuck, they are bent mapearso, Mark, sorry no spares right now Jess, pics Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2015, 07:46 PM	#39
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 gmc sierra grander C10 pat english, they need waxed up, I forgot to get pic of hood latch Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2015, 07:47 PM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 gmc sierra grander C10 Randy pics 7028212 7041208 7043250 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2015, 09:27 PM	#41
Rkansasboy Registered User Join Date: Sep 2012 Location: Jacksonville,Arkansas Posts: 50	Re: parting a 71 gmc sierra grander C10 randy how about rear bumper and brackets??

03-19-2015, 09:30 PM	#42
Razorbacker Senior Member Join Date: Aug 2011 Location: Benton, AR. Posts: 239	Re: parting a 71 gmc sierra grander C10 Randy, does the cargo light, harness, and switch go with the cab? Thanks, Tony __________________ Tony 1972 Chevy K10 SWB Custom Deluxe 350\|350\|NP205 2018 GMC Sierra Z/71 Crew 2008 GMC Yukon 2007 Chevy 1500 LT 1967 Pontiac Firebird 400

03-19-2015, 09:38 PM	#44
Lerch1145 Registered User Join Date: Oct 2014 Location: Savannah, GA Posts: 82	Re: parting a 71 gmc sierra grander C10 You have four hub caps? See one on the floor. __________________ 1972 GMC 2500 2007 Chevrolet Silverado 1500



Register or Log In To remove these advertisements.

03-19-2015, 09:43 PM	#45
NTIMID8R Registered User Join Date: Feb 2015 Location: WALLS, MS. Posts: 190	Re: parting a 71 gmc sierra grander C10 Looking for front sway bar with all brackets and mounting hardware. Price with shipping to 38680 ?? Put me in line 3rd on glovebox door. Thanks __________________ Tim Yesterday is history, tomorrow is a mystery, today is a gift, that's why it's called "the present". 1971 Sierra Grande LWB, 350/TH350, Factory Air Lots, of future mods planned!!

03-19-2015, 09:54 PM	#46
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 gmc sierra grander C10 Rkansasboy, its driver condition, $30 picked up Tony, I'll check condition of it Jess, I will pm you Lerch1145, its a ford hubcap. No other hubcaps right now NTIMID8R, I have one setup out there, one of the frame brackets needs straightened. It will also need new rubbers. $75 shipped Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2015, 10:21 PM	#47
NTIMID8R Registered User Join Date: Feb 2015 Location: WALLS, MS. Posts: 190	Re: parting a 71 gmc sierra grander C10 Randy, I'll take the sway bar and mounting hardware for $75 shipped. What shape are the wiper arms & blades and are they OEM? Also the left side a/c vent ball dash mount complete with retainer on back of it. Pics and price please also to 38680. Please pm payment info. __________________ Tim Yesterday is history, tomorrow is a mystery, today is a gift, that's why it's called "the present". 1971 Sierra Grande LWB, 350/TH350, Factory Air Lots, of future mods planned!!

03-19-2015, 11:56 PM	#48
Bslifka Registered User Join Date: Jan 2014 Location: Midwestcity oklahoma Posts: 6	Re: parting a 71 gmc sierra grander C10 How much for the steering column Shipped To 73130 Thanks, boris

03-20-2015, 12:48 AM	#49
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: parting a 71 gmc sierra grander C10 Randy any chance the floor pan would yield usable patches for inner rockers? Could also use a patch piece for the lower portion of the LH kick panel where it meets the floor pan. Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

Register or Log In To remove these advertisements.