NE WTB: NOS Sail Panel 64-66 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jdl71 · 09-08-2015, 09:05 PM

Unbelievable.

sodly · 09-08-2015, 10:03 PM

Quote:

Originally Posted by NevEno

Don't know if this helps but I seen this on c10era 60_66 Facebook page.

Yep, I saw those on IG the other day. Not sure if the seller is a member here or not but he claimed they were all sold. I've tried to reach out to him via IG but no reply so far. Hope you have better luck, GMCNUT. I appreciate you asking on my behalf!

As for my occasional WTB ad, I know it's a long shot. But I found one so there are probably others out there.

**GMCNUT** · 09-09-2015, 07:13 AM

Sodly, I hate to say it but we simply found out about these NOS mouldings too late. He sold every set he had in 45 minutes according to the page moderator. Sorry - I tried to immediately jump in on your behalf when I saw the post on here, but it was already too late....

**60-66** · 09-09-2015, 08:17 AM

Quote:

Originally Posted by GMCNUT

Sodly, as a collector of NOS GM truck parts, I hate to see you keep beating your head against a brick wall for no more gain than it would get you in the case of the upper cab mouldings. I can tell you that I have learned the hard way which ones were not worth buying over reproductions, and these upper cab mouldings are one of those things. Some items are simply "done right" and when they are, they should be considered. I recommend you buying a repro set, and then selling the one NOS one you have - its a wiser move and you will be very happy with the reproductions. I have both and you cannot tell them apart. Just my two cents

Really Steve ? You'd put Chinese parts on a Survivor ? Sorry , just gotta keep you in line here !

You know its out there , the thrill of the hunt !

**GMCNUT** · 09-09-2015, 09:32 AM

Quote:

Originally Posted by 60-66

Really Steve ? You'd put Chinese parts on a Survivor ? Sorry , just gotta keep you in line here !

You know its out there , the thrill of the hunt !

Hahaha....that "thrill of the hunt" has cost me thousands over the years, but nowadays I do buy and install a lot of reproduction parts, and have found most to not only be made here in the US and not China, but also found most to be of equal to greater quality than original, so I have saved thousands on body shop labor and re-plating using aftermarket parts.

**60-66** · 09-09-2015, 09:59 AM

Well , if made in USA Id really like proof on that. Yes I see some things done that way. My hats off to Mar-K for their products , but the Truck Shop I don't think so. Not bad mouthing them at all. I've had to use a couple things from them but being a purist I see many differences in fit and finish that are too far off. Their Bumpers front and rear are good looking till you fit them. I doubt very much that the repop sail panels are USA made but Im listening ? Sorry but my pride in my own stuff gets in the way of saving money . Most every aftermarket aluminum molding made is dead soft as compared to original. You can squeeze a reproduction Dynacorn wheel opening molding flat with two fingers , same with stainless windshield molding , these are cars I'm speaking of. A guy I know bought four sets of each just to get one good set for a 66 Impala. It has its place and satisfies a market , I would rather use nice used in this case for Sodlys truck. Other than tires its original. You know theres a difference when all those NOS sail panels sold in 45 minutes !

pimpston65 · 09-09-2015, 11:03 AM

Quote:

Originally Posted by GMCNUT

Hahaha....that "thrill of the hunt" has cost me thousands over the years, but nowadays I do buy and install a lot of reproduction parts, and have found most to not only be made here in the US and not China, but also found most to be of equal to greater quality than original, so I have saved thousands on body shop labor and re-plating using aftermarket parts.

i still have that NOS brake cable you paid for, but never sent your address!!! im sure it will fit better then repop...

**GMCNUT** · 09-09-2015, 11:07 AM

Quote:

Originally Posted by pimpston65

i still have that NOS brake cable you paid for, but never sent your address!!! im sure it will fit better then repop...

Holy crap - did I buy a NOS brake cable from you? wow - don't even remember that hahaha....I will send a PM w/ my address now

pimpston65 · 09-09-2015, 11:16 AM

Quote:

Originally Posted by GMCNUT

Holy crap - did I buy a NOS brake cable from you? wow - don't even remember that hahaha....I will send a PM w/ my address now

yup its the cable that goes from the e-handle to the equalizer bar. since your spending money and dont remember, i need about $100 to carry me til pay day!!!

oem4me · 09-09-2015, 11:53 AM

Quote:

Originally Posted by GMCNUT

He sold every set he had in 45 minutes according to the page moderator.

Selling out in 45 minutes, REALLY? Hmmm, I say bulk sale. I'd be on the lookout for these to pop up at an inflated price.

cru_zn_29 · 09-09-2015, 03:50 PM

As we know they will keep making crap because people keep buying crap. Its all about Money

jdl71 · 09-10-2015, 08:47 PM

Did anyone hear where these came from, or where they have been for the last 40 years or so?

sodly · 10-20-2015, 09:53 PM

Giving it another shot here. Anybody have a NOS drivers side sail panel for sale?

62 bigwindow · 10-20-2015, 10:03 PM

I have a set of used sails panels not new and will sell as a set if your interested

sodly · 10-20-2015, 10:29 PM

Thanks but I need NOS.

sodly · 02-14-2016, 11:15 PM

Throwing this up again.

sodly · 03-28-2016, 10:54 PM

Throwing it out there again. Anybody got a drivers side?

sodly · 06-10-2016, 10:36 PM

Time for another trip up the flag pole!

sodly · 12-12-2016, 11:24 PM

Anybody have a NOS sail panel? Just need one!

sodly · 03-24-2017, 09:35 PM

Trying again!

sodly · 06-08-2017, 08:25 PM

Another try.

sodly · 07-13-2017, 10:49 AM

What the heck.... any NOS sail panels out there?

Johns 66 · 07-13-2017, 02:15 PM

Quote:

Originally Posted by sodly

What the heck.... any NOS sail panels out there?

Sodly...Trust me they are out there...yes Brand New NOS Sail Panels, in original packaging with original GM paperwork I have seen them with my own eyes.....But heres that bad part...If someone has then...they WILL NOT SELL them.

If they have taking the pains taking effort to get NOS parts, then 9 times out of 10 they will use that stuff on their own project and unless you come across someone who 1...doesnt know what they have..( Highly Doubt) 2. Has no friends who could use the parts...again highly doubt or 3 that you have something that they really need and would be willing to trade...chances are you are simply out of luck...Sorry...

62 bigwindow · 07-14-2017, 10:03 PM

Believe I have a set and wont separate them

Johns 66 · 07-14-2017, 11:19 PM

U have a nos set?

09-08-2015, 09:05 PM	#26
jdl71 Registered User Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: WTB: NOS Sail Panel 64-66 Unbelievable. __________________ Psalm 23 64 C10 66 K20

09-09-2015, 07:13 AM	#28
GMCNUT Senior Member Join Date: Jun 2007 Location: Arab Alabama Posts: 1,809	Re: WTB: NOS Sail Panel 64-66 Sodly, I hate to say it but we simply found out about these NOS mouldings too late. He sold every set he had in 45 minutes according to the page moderator. Sorry - I tried to immediately jump in on your behalf when I saw the post on here, but it was already too late.... __________________ My Projects and Toys - All 100% Stock 1972 CST "Highlander" Blazer - 350 auto, PS, PB, A/C, Tilt, Tach, AM/FM & Positraction 1966 Chevy SWB Fleetside BBW Custom Cab, #'s matching 327 V8 & Powerglide, factory deluxe heat, PS, PB, Tinted Glass, sway bar 1961 Chevy SWB Fleetside BBW Custom Cab #'s matching 283 V8 & Powerglide w/ uber-rare Cool-Pack A/C, factory PB, deluxe heat, Clock 1961 GMC K1000 4x4 SWB w/ BBW, Custom Cab and numbers matching 305D V6 engine & 4 spd 1960 GMC SWB Fleetside BBW Custom Cab #'s matching 305A V6 & Hydramatic, factory PB, Clock, Tach, Compass, Hood Jet 1959 Chevy SWB Fleetside BBW Custom Cab w/ rare stainless bed trim, #'s matching 283 V8 & Hydramatic, Deluxe Heat, radio, spotlight 1958 Chevy Cameo #'s matching 283 V8 & Hydramatic, radio, window washers, Factory PB 1958 GMC BBW SWB Fleetside Custom Cab, #'s matching 336 V8 Hydramatic, Factory PS, PB, Clock, RSD, Deluxe Heat & Hood Jet 1957 GMC Suburban Pickup (GMC's Cameo) #'s matching 347 V8 Hydramatic, uber-rare vacuum ashtray, Factory PS, PB, Clock, RSD, Hood Jet 1956 Chevy 3800 1 ton w/ rare 9 ft stepside bed, factory 265 V8 w/ Hydramatic, factory PB, Custom Cab, deluxe heat, spotlight and hood jet.

09-09-2015, 09:59 AM	#31
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: WTB: NOS Sail Panel 64-66 Well , if made in USA Id really like proof on that. Yes I see some things done that way. My hats off to Mar-K for their products , but the Truck Shop I don't think so. Not bad mouthing them at all. I've had to use a couple things from them but being a purist I see many differences in fit and finish that are too far off. Their Bumpers front and rear are good looking till you fit them. I doubt very much that the repop sail panels are USA made but Im listening ? Sorry but my pride in my own stuff gets in the way of saving money . Most every aftermarket aluminum molding made is dead soft as compared to original. You can squeeze a reproduction Dynacorn wheel opening molding flat with two fingers , same with stainless windshield molding , these are cars I'm speaking of. A guy I know bought four sets of each just to get one good set for a 66 Impala. It has its place and satisfies a market , I would rather use nice used in this case for Sodlys truck. Other than tires its original. You know theres a difference when all those NOS sail panels sold in 45 minutes ! __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

09-09-2015, 03:50 PM	#36
cru_zn_29 Registered User Join Date: Feb 2011 Location: Joshua Tree Ca. Posts: 719	Re: WTB: NOS Sail Panel 64-66 As we know they will keep making crap because people keep buying crap. Its all about Money

09-10-2015, 08:47 PM	#37
jdl71 Registered User Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: WTB: NOS Sail Panel 64-66 Did anyone hear where these came from, or where they have been for the last 40 years or so? __________________ Psalm 23 64 C10 66 K20

10-20-2015, 09:53 PM	#38
sodly Registered User Join Date: Nov 2009 Location: Nebraska Posts: 1,034	Re: WTB: NOS Sail Panel 64-66 Giving it another shot here. Anybody have a NOS drivers side sail panel for sale? __________________ WANTED: * 60-66 Chevy and GMC FACTORY PHOTOGRAPHY (scans) of pickups and carryalls. *Custom Camper Club*-- Own a 65-66 Custom Camper? Join us at: http://67-72chevytrucks.com/vboard/g...hp?groupid=117

10-20-2015, 10:03 PM	#39
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: WTB: NOS Sail Panel 64-66 I have a set of used sails panels not new and will sell as a set if your interested

10-20-2015, 10:29 PM	#40
sodly Registered User Join Date: Nov 2009 Location: Nebraska Posts: 1,034	Re: WTB: NOS Sail Panel 64-66 Thanks but I need NOS. __________________ WANTED: * 60-66 Chevy and GMC FACTORY PHOTOGRAPHY (scans) of pickups and carryalls. *Custom Camper Club*-- Own a 65-66 Custom Camper? Join us at: http://67-72chevytrucks.com/vboard/g...hp?groupid=117

02-14-2016, 11:15 PM	#41
sodly Registered User Join Date: Nov 2009 Location: Nebraska Posts: 1,034	Re: WTB: NOS Sail Panel 64-66 Throwing this up again. __________________ WANTED: * 60-66 Chevy and GMC FACTORY PHOTOGRAPHY (scans) of pickups and carryalls. *Custom Camper Club*-- Own a 65-66 Custom Camper? Join us at: http://67-72chevytrucks.com/vboard/g...hp?groupid=117

03-28-2016, 10:54 PM	#42
sodly Registered User Join Date: Nov 2009 Location: Nebraska Posts: 1,034	Re: WTB: NOS Sail Panel 64-66 Throwing it out there again. Anybody got a drivers side? __________________ WANTED: * 60-66 Chevy and GMC FACTORY PHOTOGRAPHY (scans) of pickups and carryalls. *Custom Camper Club*-- Own a 65-66 Custom Camper? Join us at: http://67-72chevytrucks.com/vboard/g...hp?groupid=117

06-10-2016, 10:36 PM	#43
sodly Registered User Join Date: Nov 2009 Location: Nebraska Posts: 1,034	Re: WTB: NOS Sail Panel 64-66 Time for another trip up the flag pole! __________________ WANTED: * 60-66 Chevy and GMC FACTORY PHOTOGRAPHY (scans) of pickups and carryalls. *Custom Camper Club*-- Own a 65-66 Custom Camper? Join us at: http://67-72chevytrucks.com/vboard/g...hp?groupid=117

12-12-2016, 11:24 PM	#44
sodly Registered User Join Date: Nov 2009 Location: Nebraska Posts: 1,034	Re: WTB: NOS Sail Panel 64-66 Anybody have a NOS sail panel? Just need one! __________________ WANTED: * 60-66 Chevy and GMC FACTORY PHOTOGRAPHY (scans) of pickups and carryalls. *Custom Camper Club*-- Own a 65-66 Custom Camper? Join us at: http://67-72chevytrucks.com/vboard/g...hp?groupid=117

03-24-2017, 09:35 PM	#45
sodly Registered User Join Date: Nov 2009 Location: Nebraska Posts: 1,034	Re: WTB: NOS Sail Panel 64-66 Trying again! __________________ WANTED: * 60-66 Chevy and GMC FACTORY PHOTOGRAPHY (scans) of pickups and carryalls. *Custom Camper Club*-- Own a 65-66 Custom Camper? Join us at: http://67-72chevytrucks.com/vboard/g...hp?groupid=117

06-08-2017, 08:25 PM	#46
sodly Registered User Join Date: Nov 2009 Location: Nebraska Posts: 1,034	Re: WTB: NOS Sail Panel 64-66 Another try. __________________ WANTED: * 60-66 Chevy and GMC FACTORY PHOTOGRAPHY (scans) of pickups and carryalls. *Custom Camper Club*-- Own a 65-66 Custom Camper? Join us at: http://67-72chevytrucks.com/vboard/g...hp?groupid=117

07-13-2017, 10:49 AM	#47
sodly Registered User Join Date: Nov 2009 Location: Nebraska Posts: 1,034	Re: WTB: NOS Sail Panel 64-66 What the heck.... any NOS sail panels out there? __________________ WANTED: * 60-66 Chevy and GMC FACTORY PHOTOGRAPHY (scans) of pickups and carryalls. *Custom Camper Club*-- Own a 65-66 Custom Camper? Join us at: http://67-72chevytrucks.com/vboard/g...hp?groupid=117



Register or Log In To remove these advertisements.

07-14-2017, 10:03 PM	#49
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: WTB: NOS Sail Panel 64-66 Believe I have a set and wont separate them

07-14-2017, 11:19 PM	#50
Johns 66 Registered User Join Date: Apr 2017 Location: Talladega Alabama Posts: 860	Re: WTB: NOS Sail Panel 64-66 U have a nos set?

Register or Log In To remove these advertisements.