CA 61 Suburban Part Out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

perro13 · 07-21-2015, 10:10 PM

Quote:

Originally Posted by nsb29

looking for the bolt in peace of a high hump also clam shell supports thanks Doug

the bolt down piece is pretty roached out

perro13 · 07-21-2015, 10:11 PM

Quote:

Originally Posted by 1963c-10

standard knobs or deluxe? Looking for a set of deluxe knobs and cables.

standard knobs

perro13 · 07-21-2015, 10:13 PM

Quote:

Originally Posted by pimpston65

how about the firewall section for both pass, driver side I need the part where it joins by the foot well seam, also how are the rear quarters and the rear corners? how about sections from the rear wheel arches both in front of and behind the arch from both sides....

get some pics this week

perro13 · 07-21-2015, 10:14 PM

Quote:

Originally Posted by oem4me

Like finding an ice cube in hell, but what the heck, I'll ask ... Any remnants of a middle floor mat? How 'bout a short middle seat?

nada

perro13 · 07-21-2015, 10:16 PM

Quote:

Originally Posted by tbagger61

IS the steering column from an automatic or manual shift

manual shift

**bhc41051** · 07-22-2015, 12:06 AM

How much for the shaft that runs from the rag joint to the sliding coupling do-hickie? shipping to 43025. Also is there some sort of bracket on the firewall that holds the throttle cable?

RedRoad · 07-22-2015, 12:26 AM

Still interested in either one of the brown steering wheels

patrickk1 · 07-22-2015, 08:24 AM

Price + shipping to 01862 on the firewall portion of the high hump?

pimpston65 · 07-22-2015, 09:23 AM

Quote:

Originally Posted by perro13

get some pics this week

sweet

1963c-10 · 07-22-2015, 09:42 AM

Perro...how much for the choke cable?

perro13 · 07-22-2015, 10:42 AM

Quote:

Originally Posted by bhc41051

How much for the shaft that runs from the rag joint to the sliding coupling do-hickie? shipping to 43025. Also is there some sort of bracket on the firewall that holds the throttle cable?

keeping the column together

perro13 · 07-22-2015, 10:43 AM

Quote:

Originally Posted by 1963c-10

Perro...how much for the choke cable?

i'll take a look at condition $15 shipped

suville · 07-22-2015, 10:47 AM

Quote:

Originally Posted by suville

Would you sell the upper hatch hinges? W/Shipping to 83647 Thanks for your time
Steve

??

perro13 · 07-22-2015, 10:50 AM

Quote:

Originally Posted by patrickk1

Price + shipping to 01862 on the firewall portion of the high hump?

$130 shipped

**bhc41051** · 07-22-2015, 11:49 AM

Quote:

Originally Posted by bhc41051

How much for the shaft that runs from the rag joint to the sliding coupling do-hickie? shipping to 43025. Also is there some sort of bracket on the firewall that holds the throttle cable?

On second thought how about the whole column, everything from the steering gear up minus the steering wheel.

perro13 · 07-22-2015, 12:02 PM

Quote:

Originally Posted by bhc41051

On second thought how about the whole column, everything from the steering gear up minus the steering wheel.

$110 shipped

1963c-10 · 07-22-2015, 02:49 PM

Quote:

Originally Posted by perro13

i'll take a look at condition $15 shipped

Sounds good. PM me the paypal....its been a few months and I'll have it off to you ASAP. I'll pm my address for shipping. Thanks again!!!!

You always come through on what I'm looking for and thanks for your service to the forum. I know a bunch of us appreciate the parts.

perro13 · 07-22-2015, 09:17 PM

Quote:

Originally Posted by redroad

still interested in either one of the brown steering wheels

$25

perro13 · 07-22-2015, 09:30 PM

Quote:

Originally Posted by pimpston65

how about the firewall section for both pass, driver side I need the part where it joins by the foot well seam, also how are the rear quarters and the rear corners? how about sections from the rear wheel arches both in front of and behind the arch from both sides....

here are some pics

pimpston65 · 07-22-2015, 10:35 PM

get out your cutting tools cuz i'll take it all!!! both sides!!! firewall/floor pan sections also!!! please if you could leave the firewall/floorpan section attached at the seam so i can graft it in better, if you can that is.

RedRoad · 07-23-2015, 02:20 AM

Quote:

Originally Posted by perro13

$25

Sounds good. Ill be driving through on the 3rd of august or there about, I can pick up if that works if not let me know how much to ship 91342.

Thanks

Tony

patrickk1 · 07-23-2015, 08:01 AM

Quote:

Originally Posted by perro13

$130 shipped

PM me the paypal info please.

**argonaut** · 07-26-2015, 06:07 PM

Quote:

Originally Posted by perro13

$30 for light, keeping the front seats together

Perro,
I'll take the dome lamp base. For reference I took a pic of mine. I'm interested in the steel base, not the plastic lamp piece. Its spot welded to the center bar. If you are cutting up the body then maybe you can just cut the center section of the bar out with the bracket to make it easier?

Also, how is that spare tire mounted in the back? is there a bracket in there? Got a pic?

Thanks!

perro13 · 07-26-2015, 06:25 PM

Get some pics tomorrow will do on the light. might be in Norwalk next weekend.

Going to start taking parts off the suburban. get them shipped this week, For you guys who are waiting. had to work this weekend

62 Barnfind · 07-26-2015, 08:05 PM

Did the speedo work? If so how much?

07-22-2015, 12:06 AM	#31
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 788	Re: 61 Suburban Part Out How much for the shaft that runs from the rag joint to the sliding coupling do-hickie? shipping to 43025. Also is there some sort of bracket on the firewall that holds the throttle cable?

07-22-2015, 12:26 AM	#32
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 927	Re: 61 Suburban Part Out Still interested in either one of the brown steering wheels

07-22-2015, 08:24 AM	#33
patrickk1 Registered User Join Date: Apr 2009 Location: Billerica, Ma Posts: 197	Re: 61 Suburban Part Out Price + shipping to 01862 on the firewall portion of the high hump? __________________ - Patrick 1964 GMC pickup lwb ~ My newest build! 1937 Ford Coupe ~ Custom frame, LS1, quickchange 1950 Chevrolet 3100 ~ Bagged (Sold) 1931 Chrysler Roadster ~'32 Ford Frame, Channeled 8" (Originally a 60's show car) 1967 Chevelle ~ 454 Triple Black (Sold) 1964 Chevrolet Impala SS (Sold)

07-22-2015, 09:42 AM	#35
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 61 Suburban Part Out Perro...how much for the choke cable? __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

07-22-2015, 10:35 PM	#45
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: 61 Suburban Part Out get out your cutting tools cuz i'll take it all!!! both sides!!! firewall/floor pan sections also!!! please if you could leave the firewall/floorpan section attached at the seam so i can graft it in better, if you can that is.

07-26-2015, 06:25 PM	#49
perro13 Registered User Join Date: Dec 2008 Location: Stockton CA Posts: 2,364	Re: 61 Suburban Part Out Get some pics tomorrow will do on the light. might be in Norwalk next weekend. Going to start taking parts off the suburban. get them shipped this week, For you guys who are waiting. had to work this weekend

07-26-2015, 08:05 PM	#50
62 Barnfind Registered User Join Date: Jan 2012 Location: Killeen, Tx Posts: 1,373	Re: 61 Suburban Part Out Did the speedo work? If so how much? __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.