TX Parting out a 3/4 ton 1970 GMC super - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HSRACER · 09-09-2015, 10:56 PM

Quote:

Originally Posted by REEDS 72

Tail light harness cond splices/cuts some up close pictures and price thank you shipping will be 84003.

I will look tomorrow. It has a hitch so there may have been some splicing. I think I have some others from a Chevrolet, will that work for you as well? It would be 15 plus shipping.

Johns66 · 09-09-2015, 11:50 PM

Are all four of the rear bumper brackets there and in good shape?

John

**cericd** · 09-10-2015, 12:52 AM

How about the cigarette lighter harness to go along with the lighter? What shape is it in?

Jamiem753 · 09-10-2015, 06:46 AM

I'll pass thank you.

1old68 · 09-10-2015, 06:57 AM

Quote:

Originally Posted by HSRACER

I will only sell this complete, and local pick up only. Thanks

I'll have to pass on the differential, Thanks

HSRACER · 09-10-2015, 11:52 AM

Quote:

Originally Posted by 68350

Is the tool box door rusty? How about the deluxe markers, how much?

Bed side door has been sold locally.

HSRACER · 09-10-2015, 11:53 AM

Quote:

Originally Posted by 6t727t2

In line for the toolbox door.

Tool box door was sold locally

HSRACER · 09-10-2015, 11:53 AM

Quote:

Originally Posted by Johns66

Are all four of the rear bumper brackets there and in good shape?

John

Rear bumper was sold.

HSRACER · 09-10-2015, 11:55 AM

Quote:

Originally Posted by cericd

How about the cigarette lighter harness to go along with the lighter? What shape is it in?

No harness on these trucks. Wire was integrated into the main harness. All you have to do is run a hot wire to the lighter with an inline fuse.

**cericd** · 09-10-2015, 12:58 PM

I guess wiring harness was the wrong term. I mean the wire with the plugs on either end like in the following pic.

Undone · 09-10-2015, 05:27 PM

Quote:

Originally Posted by HSRACER

I will look tomorrow. It has a hitch so there may have been some splicing. I think I have some others from a Chevrolet, will that work for you as well? It would be 15 plus shipping.

How much for the hitch? Pictures?

HSRACER · 09-11-2015, 02:09 PM

Quote:

Originally Posted by Undone

How much for the hitch? Pictures?

Hitch sold locally. Thanks

HSRACER · 09-11-2015, 02:12 PM

Quote:

Originally Posted by cericd

I guess wiring harness was the wrong term. I mean the wire with the plugs on either end like in the following pic.

I will look when it quits raining!

**cericd** · 09-11-2015, 02:14 PM

Thanks. No rush.

HSRACER · 09-11-2015, 02:18 PM

Quote:

Originally Posted by cericd

Thanks. No rush.

Looks like you have plenty. Are you collecting them?

**cericd** · 09-11-2015, 02:56 PM

Nope. That was just a pic I found in the forum that had a pic of the wire. I have a couple that I've bought through the forum. None were as nice as I had hoped going by the pictures though and I think only one of them came with the wire so it would be nice to have an extra wire.

**MidLifer** · 09-11-2015, 03:35 PM

Interested in steering column and auto shift linkage. I can provide prepaid UPS shipping label if you have a UPS dropoff location near you or if they pick up at your work.

**Cash3481** · 09-12-2015, 01:33 AM

Whats the condition of the front bumper. If it Is in good shape and has the indents for the parking lights I'm interested.

**gmc 2500 4x4** · 09-12-2015, 05:42 AM

pass on grill and eyebrows, impossible 2 find rust free grill thanx 4 the pics

**68350** · 09-12-2015, 03:10 PM

Could you measure the distance between the mounting holes on the mirrors? I just want to make sure these are the same mirrors that are on my 72 gmc. My passenger mirror broke which is why I want to confirm. Thanks

HSRACER · 09-12-2015, 10:54 PM

Quote:

Originally Posted by Cash3481

Whats the condition of the front bumper. If it Is in good shape and has the indents for the parking lights I'm interested.

Bumper sold locally.

HSRACER · 09-12-2015, 10:55 PM

Quote:

Originally Posted by gmc 2500 4x4

pass on grill and eyebrows, impossible 2 find rust free grill thanx 4 the pics

No problem, thanks for looking.

HSRACER · 09-12-2015, 10:55 PM

Quote:

Originally Posted by 68350

Could you measure the distance between the mounting holes on the mirrors? I just want to make sure these are the same mirrors that are on my 72 gmc. My passenger mirror broke which is why I want to confirm. Thanks

Will do tomorrow

HSRACER · 09-12-2015, 11:00 PM

Quote:

Originally Posted by MidLifer

Interested in steering column and auto shift linkage. I can provide prepaid UPS shipping label if you have a UPS dropoff location near you or if they pick up at your work.

I have everything for it except the frame pivot piece and the forks on the transmission. They were sold locally. I will take 125 plus the ride. I usually get 150 for just the columns locally but will deal a little on the board. I can ship it through my wife's work if you want to do the prepay deal. LMK asap as I do have a couple locals interested. Thanks.

HSRACER · 09-12-2015, 11:10 PM

Update for everyone. I cut the heck out of the truck today. An artist wanted the back of the cab and the back of the bed to make some sort of bed head and foot board.

We cut out the ac dash and the opening for the side tool box in the bed. The tool box door and box was sold. I am wondering if anyone needs the actual side of the bed that is stamped for the tool box door and hinges.

I do have the sides of the bed that is now 14 inches shorter in the rear. If anyone needs any quick cuts on bed sides let me know before Monday as they are going to the scrap yard. I have the front panel for the bed as well.

The floor of the cab is solid as is the firewall. We are cutting up the rest of the cab tomorrow so if you need anything please let me know tonight before we cut in the morning. Sorry for the short notice!

Thanks!

09-09-2015, 11:50 PM	#27
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: Parting out a 3/4 ton 1970 GMC super Are all four of the rear bumper brackets there and in good shape? John

09-10-2015, 12:52 AM	#28
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Parting out a 3/4 ton 1970 GMC super How about the cigarette lighter harness to go along with the lighter? What shape is it in? __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

09-10-2015, 06:46 AM	#29
Jamiem753 Registered User Join Date: Oct 2014 Location: Annandale, NJ Posts: 33	Re: Parting out a 3/4 ton 1970 GMC super I'll pass thank you.

09-10-2015, 12:58 PM	#35
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Parting out a 3/4 ton 1970 GMC super I guess wiring harness was the wrong term. I mean the wire with the plugs on either end like in the following pic. Attached Images __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872 Last edited by cericd; 09-10-2015 at 07:09 PM. Reason: Spelling

09-11-2015, 02:14 PM	#39
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Parting out a 3/4 ton 1970 GMC super Thanks. No rush. __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

09-11-2015, 02:56 PM	#41
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Parting out a 3/4 ton 1970 GMC super Nope. That was just a pic I found in the forum that had a pic of the wire. I have a couple that I've bought through the forum. None were as nice as I had hoped going by the pictures though and I think only one of them came with the wire so it would be nice to have an extra wire. __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

09-11-2015, 03:35 PM	#42
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: Parting out a 3/4 ton 1970 GMC super Interested in steering column and auto shift linkage. I can provide prepaid UPS shipping label if you have a UPS dropoff location near you or if they pick up at your work.

09-12-2015, 01:33 AM	#43
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting out a 3/4 ton 1970 GMC super Whats the condition of the front bumper. If it Is in good shape and has the indents for the parking lights I'm interested. __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

09-12-2015, 05:42 AM	#44
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,972	Re: Parting out a 3/4 ton 1970 GMC super pass on grill and eyebrows, impossible 2 find rust free grill thanx 4 the pics

09-12-2015, 03:10 PM	#45
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Parting out a 3/4 ton 1970 GMC super Could you measure the distance between the mounting holes on the mirrors? I just want to make sure these are the same mirrors that are on my 72 gmc. My passenger mirror broke which is why I want to confirm. Thanks __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

09-12-2015, 11:10 PM	#50
HSRACER Registered User Join Date: Sep 2007 Location: Katy TX Posts: 1,268	Re: Parting out a 3/4 ton 1970 GMC super Update for everyone. I cut the heck out of the truck today. An artist wanted the back of the cab and the back of the bed to make some sort of bed head and foot board. We cut out the ac dash and the opening for the side tool box in the bed. The tool box door and box was sold. I am wondering if anyone needs the actual side of the bed that is stamped for the tool box door and hinges. I do have the sides of the bed that is now 14 inches shorter in the rear. If anyone needs any quick cuts on bed sides let me know before Monday as they are going to the scrap yard. I have the front panel for the bed as well. The floor of the cab is solid as is the firewall. We are cutting up the rest of the cab tomorrow so if you need anything please let me know tonight before we cut in the morning. Sorry for the short notice! Thanks! __________________ HSRACER Slammed 53 5 window Blown/Bagged 54 Pickup Patinaed 67 LS stepside Supercharged 67 Nova Bagged 69 Suburban Turbo'ed 5.3 LS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.