Lower steering column bearing installation - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Possmguts · 01-06-2016, 10:02 PM

Quote:

Originally Posted by LockDoc

The NSS would keep it from pulling out if it is still installed and now that I think about it I think the shift collar is twist locked into the top of the tube also. I would just remove the arm for now.

LockDoc

Thanks again!.. By the way.. that wasnt you who sent me a PM was it? I somehow deleted it before seeing it or who sent it...

Possmguts · 01-09-2016, 06:12 PM

Quote:

Originally Posted by LockDoc

The NSS would keep it from pulling out if it is still installed and now that I think about it I think the shift collar is twist locked into the top of the tube also. I would just remove the arm for now.

LockDoc

Good Lord.. I went to order upper and lower bearings and they wanted to charge 25 bucks to ship them! Would have been 100 bucks total.. this was at Classic Heartbeat... where else should I check?

**RodnRudy** · 01-10-2016, 06:33 PM

I ordered a lower bearing for my 68 from National Parts Depot, $25.00 and along with some other stuff, gaskets and such, shipping was only about $9.00. I'm in Indiana and order is coming from Michigan.
Some of these dealers charge crazy shipping fees. Phil

**LockDoc** · 01-10-2016, 11:06 PM

Quote:

Originally Posted by Possmguts

Thanks again!.. By the way.. that wasnt you who sent me a PM was it? I somehow deleted it before seeing it or who sent it...

Wasn't me.

Quote:

Originally Posted by Possmguts

Good Lord.. I went to order upper and lower bearings and they wanted to charge 25 bucks to ship them! Would have been 100 bucks total.. this was at Classic Heartbeat... where else should I check?

You might try your local NAPA store if you have one. They wouldn't have them on hand but they may be able to order them.

LockDoc

Possmguts · 01-15-2016, 04:36 PM

Done.. came out pretty nice. Thanks for the help LockDoc

**LockDoc** · 01-15-2016, 10:50 PM

Quote:

Originally Posted by Possmguts

Done.. came out pretty nice. Thanks for the help LockDoc

No problem. That looks really good!

LockDoc

brian1971 · 11-04-2016, 10:59 PM

subscribed for future use.

Richard2112 · 12-12-2017, 03:34 PM

This is a great thread and is about to come in very handy. I assume from the pictures (thanks sduckworth13) that the ball bearings can be put into the race and reassembled? I have a variety of different size ball bearings and not certain which size it uses.

As I begin my disassembly, I see no ball bearings but they might be caught up inside the race, stuck with grease. I doubt it though as there appears to be no grease in the race. I haven't removed the column (yet) but shifted it enough the get a look at the lower bearing race while it is still on the truck.

I'll see if I can find a ball.

01-10-2016, 06:33 PM	#28
RodnRudy Senior Member Join Date: Oct 2014 Location: New Palestine In Posts: 932	Re: Lower steering column bearing installation I ordered a lower bearing for my 68 from National Parts Depot, $25.00 and along with some other stuff, gaskets and such, shipping was only about $9.00. I'm in Indiana and order is coming from Michigan. Some of these dealers charge crazy shipping fees. Phil

01-15-2016, 04:36 PM	#30
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: Lower steering column bearing installation Done.. came out pretty nice. Thanks for the help LockDoc Attached Images __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

11-04-2016, 10:59 PM	#32
brian1971 Registered User Join Date: Sep 2012 Location: fort lauderdale,fl Posts: 1,296	Re: Lower steering column bearing installation subscribed for future use. __________________ 1971 c10 custom deluxe fleetside swb LS3 w/BTR stage IV cam,4L85E w/3600 stall 67-72chevytrucks.com/vboard/showthread.php?t=558024

12-12-2017, 03:34 PM	#33
Richard2112 Registered User Join Date: Jul 2014 Location: South East Ohio Posts: 644	Re: Lower steering column bearing installation This is a great thread and is about to come in very handy. I assume from the pictures (thanks sduckworth13) that the ball bearings can be put into the race and reassembled? I have a variety of different size ball bearings and not certain which size it uses. As I begin my disassembly, I see no ball bearings but they might be caught up inside the race, stuck with grease. I doubt it though as there appears to be no grease in the race. I haven't removed the column (yet) but shifted it enough the get a look at the lower bearing race while it is still on the truck. I'll see if I can find a ball.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.