MO This 72 C10 just signed it's organ donor card.... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 05-13-2016, 11:51 AM

Quote:

Originally Posted by Blue/72

I need one front bumper lens screw would you split them up or sell one lens set?

Hey Wyatt. Get me your address and I will toss a couple of the screws in the mail to you. Thanks, Fred.

**specialtyretail** · 05-13-2016, 12:13 PM

Quote:

Originally Posted by 72 Super

Hi Fred, yes I need all of the cowl panel screws exterior and under the seal. Yes the screws to hold the glove box hinge to dash as well as the ones that hold the cardboard inner glove box liner also.

Just the power brake booster and master cylinder.

Thanks,
Ray

SOLD,,,, THANKS.... Hey Ray, I just pulled these. As far as the master cylinder and booster, I would prefer to just sell and ship the booster to save on postage since a rebuilt master is fairly inexpensive and you would probably want to replace it anyways. Also have one more screw, it was still stuck in the magnetic tray we use..

**72 Super** · 05-13-2016, 12:29 PM

Quote:

Originally Posted by specialtyretail

Hey Ray, I just pulled these. As far as the master cylinder and booster, I would prefer to just sell and ship the booster to save on postage since a rebuilt master is fairly inexpensive and you would probably want to replace it anyways. Also have one more screw, it was still stuck in the magnetic tray we use..

Fred, have the exterior cowl panel screw been painted? I would have the original master cylinder rebuilt so it would look factory. I was kinda after that more that the booster.

If you want you can give a quote to Maryland 20781.

Thanks,
Ray

OLEBEATER · 05-13-2016, 12:52 PM

Looking at the pic of under the hood, seems like the brace on the driver inner fender is still there; the long narrow brace at the bottom. Is that available and what is the price plus shipping to Va. 22435? Thanks..........

**specialtyretail** · 05-13-2016, 01:02 PM

Quote:

Originally Posted by 72 Super

Fred, have the exterior cowl panel screw been painted? I would have the original master cylinder rebuilt so it would look factory. I was kinda after that more that the booster.

If you want you can give a quote to Maryland 20781.

Thanks,
Ray

Hey Ray. They are just rusty, were covered in pine needles. I do not think there was ever a repaint, so they are how they were. I just pulled the booster/master cylinder. How does it look to you?

**specialtyretail** · 05-13-2016, 01:08 PM

Quote:

Originally Posted by OLEBEATER

Looking at the pic of under the hood, seems like the brace on the driver inner fender is still there; the long narrow brace at the bottom. Is that available and what is the price plus shipping to Va. 22435? Thanks..........

SOLD,,,, THANKS.... This brace?? How about $10.00 shipped to your door. Thanks, Fred.

54Caddy · 05-13-2016, 01:26 PM

I need the rear coil spring mount plates that are riveted to the crossmember. I don't know if your tearing it down that far.

**specialtyretail** · 05-13-2016, 01:28 PM

Quote:

Originally Posted by 54Caddy

I need the rear coil spring mount plates that are riveted to the crossmember. I don't know if your tearing it down that far.

Not for a while. Odds are they are in pretty bad shape. Thanks, Fred.

**72 Super** · 05-13-2016, 02:14 PM

Quote:

Originally Posted by specialtyretail

Hey Ray. They are just rusty, were covered in pine needles. I do not think there was ever a repaint, so they are how they were. I just pulled the booster/master cylinder. How does it look to you?

Hi Fred, i know it Needs to be gone through, what would you wan for it with shipping? How much on the screws?

Thanks,
Ray

**specialtyretail** · 05-13-2016, 02:19 PM

Quote:

Originally Posted by 72 Super

Hi Fred, i know it Needs to be gone through, what would you wan for it with shipping? How much on the screws?

Thanks,
Ray

Shipping will be the kicker. How about $58.00 for it and the screws shipped to you? Thanks, Fred.

OLEBEATER · 05-13-2016, 04:53 PM

Hey Fred, that's the brace, I'll take it. Roland

**specialtyretail** · 05-13-2016, 04:58 PM

Quote:

Originally Posted by OLEBEATER

Hey Fred, that's the brace, I'll take it. Roland

It is yours. Our paypal is sharley@cablerocket.com Thanks, Fred.

**72 Super** · 05-13-2016, 05:03 PM

Quote:

Originally Posted by specialtyretail

Shipping will be the kicker. How about $58.00 for it and the screws shipped to you? Thanks, Fred.

Hi Fred,

I'm going to hold off on the booster/master for now. I will take the screws.

Thank you,
Ray

**specialtyretail** · 05-13-2016, 05:09 PM

Quote:

Originally Posted by 72 Super

Hi Fred,

I'm going to hold off on the booster/master for now. I will take the screws.

Thank you,
Ray

Sure thing Ray. $8.00 shipped for the glove box and cowl screws. Thanks, Fred.

OLEBEATER · 05-14-2016, 08:09 AM

Payment per paypal has been sent. ship to Roland Hughes, 324 Bells Cove Road, Callao, VA,22435. Thanks..............

**specialtyretail** · 05-14-2016, 08:23 AM

Quote:

Originally Posted by OLEBEATER

Payment per paypal has been sent. ship to Roland Hughes, 324 Bells Cove Road, Callao, VA,22435. Thanks..............

I should be able to get it out today. Thanks, Fred.

Sklptrljay · 05-14-2016, 02:30 PM

How much for the lower trim shipped to 95687? Would you happen to have the lower trim pieces for the front fenders?

**specialtyretail** · 05-14-2016, 03:17 PM

Quote:

Originally Posted by Sklptrljay

How much for the lower trim shipped to 95687? Would you happen to have the lower trim pieces for the front fenders?

No front fender trim. Let me try to get it pulled and see what shape it is in and I will let you know. Thanks, Fred.

Sklptrljay · 05-14-2016, 03:56 PM

Quote:

Originally Posted by specialtyretail

No front fender trim. Let me try to get it pulled and see what shape it is in and I will let you know. Thanks, Fred.

Okay, thanks.

**FIREBALL** · 05-14-2016, 04:24 PM

Hey Fred, I'm in search for the two L shaped brackets on the front bumper, one on each inside holding the top portion of the bumper. Im also after any rear tailgate molding trim clips, ones Im after are on each side of the tailgate handle the long strips of trim, I had a few break on me. Thanks Kurt

**specialtyretail** · 05-14-2016, 04:27 PM

Quote:

Originally Posted by FIREBALL

Hey Fred, I'm in search for the two L shaped brackets on the front bumper, one on each inside holding the top portion of the bumper. Im also after any rear tailgate molding trim clips, ones Im after are on each side of the tailgate handle the long strips of trim, I had a few break on me. Thanks Kurt

I might can hook you up with the bumper brackets. Nothing on the trim clips, sorry. Thanks, Fred.

LostMy65 · 05-14-2016, 05:29 PM

Is this the one you talked about saying the e-brake system wasn't good?
If this one has a good complete system with pedal, I'm interested in it.
Thanks

**specialtyretail** · 05-14-2016, 05:31 PM

Quote:

Originally Posted by LostMy65

Is this the one you talked about saying the e-brake system wasn't good?
If this one has a good complete system with pedal, I'm interested in it.
Thanks

It has an apparently functional E brake pedal, but the rest is rusted beyond use. Thanks, Fred.

Youey · 05-14-2016, 07:42 PM

Does the truck still have the spring and washer ,bearing that holds column to intermediate shaft , makes it so you can't pull the steering wheel out? If so how much.

jr1000yarder · 05-14-2016, 08:33 PM

How are the doors???

05-13-2016, 12:52 PM	#29
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: This 72 C10 just signed it's organ donor card.... Looking at the pic of under the hood, seems like the brace on the driver inner fender is still there; the long narrow brace at the bottom. Is that available and what is the price plus shipping to Va. 22435? Thanks..........

05-13-2016, 01:26 PM	#32
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,296	Re: This 72 C10 just signed it's organ donor card.... I need the rear coil spring mount plates that are riveted to the crossmember. I don't know if your tearing it down that far. __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

05-13-2016, 04:53 PM	#36
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: This 72 C10 just signed it's organ donor card.... Hey Fred, that's the brace, I'll take it. Roland

05-14-2016, 08:09 AM	#40
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: This 72 C10 just signed it's organ donor card.... Payment per paypal has been sent. ship to Roland Hughes, 324 Bells Cove Road, Callao, VA,22435. Thanks..............

05-14-2016, 02:30 PM	#42
Sklptrljay Registered User Join Date: Apr 2012 Location: Stillwater, Oklahoma Posts: 874	Re: This 72 C10 just signed it's organ donor card.... How much for the lower trim shipped to 95687? Would you happen to have the lower trim pieces for the front fenders? __________________ 1971 C/10 SWB, 15x8 Rallys, 4.5" X 7" static drop, C-notched, 350/350, 3.73 Posi. .........A 383 and Gear Vendors are on my bucket list. 1972 GMC 4X4 K1500 Survivor - Sold No matter what problems life throws at you, your time on Earth can be incredibly fulfilling and rewarding.....if you just lower your expectations. -Phil Dunphy

05-14-2016, 04:24 PM	#45
FIREBALL (007) aka Houdini Join Date: Mar 2010 Location: ROCKMART/ROME GA Posts: 354	Re: This 72 C10 just signed it's organ donor card.... Hey Fred, I'm in search for the two L shaped brackets on the front bumper, one on each inside holding the top portion of the bumper. Im also after any rear tailgate molding trim clips, ones Im after are on each side of the tailgate handle the long strips of trim, I had a few break on me. Thanks Kurt __________________ Live life one day at a time!

05-14-2016, 05:29 PM	#47
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: This 72 C10 just signed it's organ donor card.... Is this the one you talked about saying the e-brake system wasn't good? If this one has a good complete system with pedal, I'm interested in it. Thanks __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

05-14-2016, 07:42 PM	#49
Youey Registered User Join Date: Oct 2013 Location: New Jersey Posts: 222	Re: This 72 C10 just signed it's organ donor card.... Does the truck still have the spring and washer ,bearing that holds column to intermediate shaft , makes it so you can't pull the steering wheel out? If so how much.

05-14-2016, 08:33 PM	#50
jr1000yarder Registered User Join Date: May 2016 Location: Pa Posts: 1,278	Re: This 72 C10 just signed it's organ donor card.... How are the doors???



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.