GA Selling off some stuff

[71BUCKET]

Actually I maybe able to come get whole clip this evening. Only need a driver fender but we can talk.

[bdeese]

Cash is king! I'll reply to your pm and give you my cell number. I don't have a hood, sorry.

[Chevy Fan Always]

I am interested in the frame without the cab, could you get me a few close up pictures of the frame? What the heck, the cab also. I would be driving down from Ohio to get it.

Mike Wilson

[bdeese]

Originally Posted by Chevy Fan Always

I am interested in the frame without the cab, could you get me a few close up pictures of the frame? What the heck, the cab also. I would be driving down from Ohio to get it.

Mike Wilson

Cab is very rusty, useful for cuts. Some good interior stuff like a chrome gauge cluster... I'll get some pics in a bit, we just had one of our patented sun shining one minute, torrential downpours the next. Let me know of any certain areas on the frame you're curious about. I don't know about Ohio title laws, but Georgia is a bill of sale state. I have no title for the frame or cab.

[FIREBALL]

Hmmm I'm interested in frame pics as well though Chevy fan always... Was first in line of me

[bdeese]

Frame looks good from what I can tell, let me know of any specific areas that you want to see and I'll get it. A po welded some exhaust hangers in random locations, and someone half-ass cut out the 3 speed crossmember, but other than that it looks real good. I'm keeping the rear end and wheels/tires, but I'll leave it on there to load. Oh, also, the rear springs are not right. They look like front springs...

[bdeese]

cab (to me) is trash, but good for cuts if needed.

[Chevy Fan Always]

what would you need for just the bare frame? I don't need the front a-frames or cross member either.

[bdeese]

I have no need for any of it. I'd like to sell it as frame with suspension and cab. 450 firm

[bdeese]

I guess Chevy fan bowed out. Fireball, you interested?

[bdeese]

Leaving 5 lug rear end on frame. $550.

[FIREBALL]

Sorry my internet is acting crazy! I would like to have it but my extra funds are limited at the moment and it figures I've been after a coil spring swb frame and lol now I can't nab it......regardless free bump for ya

[bdeese]

$450 with rear end. $500 like it sits with wheels and tires. Last bump before I push it around back for a while... good looking 5 lug short frame here guys...

[chmurt]

Is the Rag Joint on the steering column in decent shape, and is it still available? I would also need all attaching parts & fasteners such as the lower column pinch bolt with square shouldered bolt and heavy washer, ie, everything to hook to the power steering box.

Please let me know. Chuck

[ck5566]

Might be interested in the engine frame "Perches" if they aren't from the 73-87 GM trucks. Are they small block V8's or I6 Perches? Shipping to 92284, thanks

[bdeese]

Originally Posted by ck5566

Might be interested in the engine frame "Perches" if they aren't from the 73-87 GM trucks. Are they small block V8's or I6 Perches? Shipping to 92284, thanks

I have extras of small block v8 and I6. I'd do $40 shipped on either set.

[bdeese]

Originally Posted by chmurt

Is the Rag Joint on the steering column in decent shape, and is it still available? I would also need all attaching parts & fasteners such as the lower column pinch bolt with square shouldered bolt and heavy washer, ie, everything to hook to the power steering box.

Please let me know. Chuck

I have now decided to scrap the cab and put this frame up for a future project. I will check the rag joint stuff today after work. I'll get back to you on it if you're still interested.

[ck5566]

Originally Posted by bdeese

I have extras of small block v8 and I6. I'd do $40 shipped on either set.

I will " take them " small block perches if they are original for a 68 C10 and Pending Pics I would like pics of tops & under sides of them, thanks

[bdeese]

Originally Posted by ck5566

I will " take them " small block perches if they are original for a 68 C10 and Pending Pics I would like pics of tops & under sides of them, thanks

Found 3 sets of small block v8 perches. These are the most ready to clean up and put on a vehicle. The other two are covered in grease...
I'll pm you my payment info. If you want them, $40 and they'll be on the way to you...

[chmurt]

Originally Posted by bdeese

I have now decided to scrap the cab and put this frame up for a future project. I will check the rag joint stuff today after work. I'll get back to you on it if you're still interested.

I'm still interested: Can you send a closeup pic or 2 of it? I need the rag joint and all attaching parts from the end of the Auto Trans intermediate steering shaft to the power steering box (I'm changing from manual to power steering).

[In The Ten Ring]

Do you happen to have the washer bottle bracket?

[bdeese]

updated pics for ck5566. cleaned them up a bit.

[bdeese]

Originally Posted by chmurt

I'm still interested: Can you send a closeup pic or 2 of it? I need the rag joint and all attaching parts from the end of the Auto Trans intermediate steering shaft to the power steering box (I'm changing from manual to power steering).

Let me check it all out tonight. It would definitely be the weekend before I could pull it.

Originally Posted by In The Ten Ring

Do you happen to have the washer bottle bracket?

I don't think I have an extra. Let me decide if I want to use the one I have. If not I'll sell it.

[bdeese]

Originally Posted by chmurt

I'm still interested: Can you send a closeup pic or 2 of it? I need the rag joint and all attaching parts from the end of the Auto Trans intermediate steering shaft to the power steering box (I'm changing from manual to power steering).

The shaft on this parts truck is not complete. It's missing the metal piece on the bottom. This is all it has, sorry:

[chmurt]

Originally Posted by bdeese

The shaft on this parts truck is not complete. It's missing the metal piece on the bottom. This is all it has, sorry:

I will pass since it is incomplete. Thanks for sending the pictures.
Chuck