CO 1972 4x4 Cab cuts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bhahn70 · 07-06-2016, 04:30 PM

Shoot it's a 4 speed hump. You want to pass

cjmorr13 · 07-06-2016, 05:27 PM

Bummer. Pass

67ChevyRedneck · 07-07-2016, 10:34 AM

Quote:

Originally Posted by bhahn70

You will actually receive your parts in this cab cuts post.

Yes, your parts show up!

I got my drip rails yesterday, they're actually nicer than I thought they would be. It's also funny how tiny they look off a truck.

The drip rails are so clean I actually feel bad about them being cut off the cab.

bhahn70 · 07-07-2016, 10:57 AM

Quote:

Originally Posted by 67ChevyRedneck

Yes, your parts show up!

I got my drip rails yesterday, they're actually nicer than I thought they would be. It's also funny how tiny they look off a truck.

The drip rails are so clean I actually feel bad about them being cut off the cab.

I'm glad your happy with them. Thanx again

im4darush · 07-07-2016, 02:06 PM

My cab has some rust under the drip rail extending down toward the windshield channel on both sides by the seams. The drip rail is fine, I just need the sections of metal extending from the drip rail down toward the windshield and windshield channel. I only need sections from both sides by the seams, not the entire stretch. Let me know if these are still there. Thanks.

bhahn70 · 07-07-2016, 02:11 PM

Quote:

Originally Posted by im4darush

My cab has some rust under the drip rail extending down toward the windshield channel on both sides by the seams. The drip rail is fine, I just need the sections of metal extending from the drip rail down toward the windshield and windshield channel. I only need sections from both sides by the seams, not the entire stretch. Let me know if these are still there. Thanks.

Sending pm

bhahn70 · 07-10-2016, 11:24 AM

Quote:

Originally Posted by im4darush

My cab has some rust under the drip rail extending down toward the windshield channel on both sides by the seams. The drip rail is fine, I just need the sections of metal extending from the drip rail down toward the windshield and windshield channel. I only need sections from both sides by the seams, not the entire stretch. Let me know if these are still there. Thanks.

Do you still need the pieces. Yes they are still there

bhahn70 · 07-11-2016, 01:26 PM

Ttt

bhahn70 · 07-12-2016, 08:42 PM

Ttt

bhahn70 · 07-16-2016, 04:41 PM

Ttt

67ratswb · 07-19-2016, 09:17 PM

Hi, looking for right rear body to frame mount. Need the piece that runs left to right across fear. From about center of cab to the front to rear rail. Must be solid.thank you. Mike ps shipped to zip 11716

bhahn70 · 07-19-2016, 10:15 PM

Quote:

Originally Posted by 67ratswb

Hi, looking for right rear body to frame mount. Need the piece that runs left to right across fear. From about center of cab to the front to rear rail. Must be solid.thank you. Mike ps shipped to zip 11716

Looks solid let me get it out of the bed of the truck and I will know for sure. Here is a pic. I'm cutting this thing up Friday whatever is not needed is going to scrap.

1970Chevrolet · 07-20-2016, 11:45 AM

How much for the inner roof panel? The whole piece. Mine is rusted out all above the windshield and above the doors. would be nice to just replace the whole panel. I'm in Houston TX and in no rush to get it. I think you mentioned in the first post that you were going to be driving through Texas. Any chance you could bring it with you if we agree on a price?

bhahn70 · 07-20-2016, 07:14 PM

Quote:

Originally Posted by 1970Chevrolet

How much for the inner roof panel? The whole piece. Mine is rusted out all above the windshield and above the doors. would be nice to just replace the whole panel. I'm in Houston TX and in no rush to get it. I think you mentioned in the first post that you were going to be driving through Texas. Any chance you could bring it with you if we agree on a price?

I already cut out the drip rails did you need the outer and inner roof.

1970Chevrolet · 07-21-2016, 08:24 AM

No I only need the inner roof if it hasn't been cut into yet.

bhahn70 · 07-21-2016, 11:24 AM

Quote:

Originally Posted by 1970Chevrolet

No I only need the inner roof if it hasn't been cut into yet.

I'm pretty sure it's not been cut into. So you need part of the windshield seem to then. I'm out of town now when I get back later today I'll let you know and take some more pics and shoot you a price based on condition.

1970Chevrolet · 07-21-2016, 11:31 AM

Quote:

Originally Posted by bhahn70

I'm pretty sure it's not been cut into. So you need part of the windshield seem to then. I'm out of town now when I get back later today I'll let you know and take some more pics and shoot you a price based on condition.

Yes exactly, mine is rusted out all the way down to the windshield seam, and above the doors too. Sounds good, thanks!

bhahn70 · 07-22-2016, 12:51 PM

Quote:

Originally Posted by 1970Chevrolet

No I only need the inner roof if it hasn't been cut into yet.

I would just cut the whole roof off 150.00 let me know either way

1970Chevrolet · 07-22-2016, 01:48 PM

Quote:

Originally Posted by bhahn70

I would just cut the whole roof off 150.00 let me know either way

Ok I'll take it if you are going to be driving through Texas any time soon like you said.

bhahn70 · 07-22-2016, 11:12 PM

Quote:

Originally Posted by 1970Chevrolet

Ok I'll take it if you are going to be driving through Texas any time soon like you said.

I'll be taking 20 across through Dallas will that work for you.

bhahn70 · 07-23-2016, 10:51 AM

Quote:

Originally Posted by 1970Chevrolet

Yes exactly, mine is rusted out all the way down to the windshield seam, and above the doors too. Sounds good, thanks!

I will be headed that way in no more than 2 weeks I need to know if you want the roof panel so I can cut it out today with the rest I am cutting up. Thanx

bhahn70 · 07-27-2016, 11:41 PM

Quote:

Originally Posted by bhahn70

72 cab. rockers and cab corners are shot. I will cut anywhere you need. If there is something large I can meet right off the interstate sometime in July as I will be headed to GA from CO. Going down through Texas ,Louisiana etc.

NO PRIVATE MESSAGES unless payment or shipping info is needed

Pics

bhahn70 · 07-27-2016, 11:43 PM

Quote:

Originally Posted by bhahn70

Pics

No rot

bhahn70 · 07-28-2016, 06:02 PM

Quote:

Originally Posted by bhahn70

Looks solid let me get it out of the bed of the truck and I will know for sure. Here is a pic. I'm cutting this thing up Friday whatever is not needed is going to scrap.

25.00 plus shipping do you want belt mounts to?

bhahn70 · 07-29-2016, 01:57 PM

Quote:

Originally Posted by 1970Chevrolet

Ok I'll take it if you are going to be driving through Texas any time soon like you said.

Have you figured out who will be meeting me for the roof. I'm pretty sure I'll be leaving Tue.

07-06-2016, 04:30 PM	#26
bhahn70 Registered User Join Date: Feb 2015 Location: Glendale, AZ Posts: 1,236	Re: 1972 4x4 Cab cuts Shoot it's a 4 speed hump. You want to pass __________________

07-06-2016, 05:27 PM	#27
cjmorr13 Registered User Join Date: Feb 2016 Location: Midland, TX Posts: 84	Re: 1972 4x4 Cab cuts Bummer. Pass

07-07-2016, 02:06 PM	#30
im4darush Registered User Join Date: Sep 2015 Location: Tampa, FL Posts: 57	Re: 1972 4x4 Cab cuts My cab has some rust under the drip rail extending down toward the windshield channel on both sides by the seams. The drip rail is fine, I just need the sections of metal extending from the drip rail down toward the windshield and windshield channel. I only need sections from both sides by the seams, not the entire stretch. Let me know if these are still there. Thanks.

07-11-2016, 01:26 PM	#33
bhahn70 Registered User Join Date: Feb 2015 Location: Glendale, AZ Posts: 1,236	Re: 1972 4x4 Cab cuts Ttt __________________

07-12-2016, 08:42 PM	#34
bhahn70 Registered User Join Date: Feb 2015 Location: Glendale, AZ Posts: 1,236	Re: 1972 4x4 Cab cuts Ttt __________________

07-16-2016, 04:41 PM	#35
bhahn70 Registered User Join Date: Feb 2015 Location: Glendale, AZ Posts: 1,236	Re: 1972 4x4 Cab cuts Ttt __________________

07-19-2016, 09:17 PM	#36
67ratswb Registered User Join Date: Sep 2014 Location: bohemia new york Posts: 13	Re: 1972 4x4 Cab cuts Hi, looking for right rear body to frame mount. Need the piece that runs left to right across fear. From about center of cab to the front to rear rail. Must be solid.thank you. Mike ps shipped to zip 11716

07-20-2016, 11:45 AM	#38
1970Chevrolet Registered User Join Date: Aug 2015 Location: Houston TX Posts: 92	Re: 1972 4x4 Cab cuts How much for the inner roof panel? The whole piece. Mine is rusted out all above the windshield and above the doors. would be nice to just replace the whole panel. I'm in Houston TX and in no rush to get it. I think you mentioned in the first post that you were going to be driving through Texas. Any chance you could bring it with you if we agree on a price?

07-21-2016, 08:24 AM	#40
1970Chevrolet Registered User Join Date: Aug 2015 Location: Houston TX Posts: 92	Re: 1972 4x4 Cab cuts No I only need the inner roof if it hasn't been cut into yet.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.