IL Cutting 3 cabs up...

[Dustmaker65]

Originally Posted by 6T7NCHVYC10

Could I get a cut of the gas fill hole. Mine was welded shut, and not very good. I would like to get it to look original again. Could also use a cut of the filler neck and a cap if you have that. Thanks

There is a cab with a good filler hole!

[6T7NCHVYC10]

Pic and price shipped to 31321.

[Dustmaker65]

Rwade - I have your piece cut out.

Michael Bustamante passes on kick panels.

Bennett68C10 is up on firewall cut and top of windshield pieces.

[Dustmaker65]

Originally Posted by gmc 2500 4x4

what year and what do the gmc tags look like? i could use a bottom one

PM sent. I may have one after all.

Jimmy

[Dustmaker65]

Originally Posted by 6T7NCHVYC10

Could I get a cut of the gas fill hole. Mine was welded shut, and not very good. I would like to get it to look original again. Could also use a cut of the filler neck and a cap if you have that. Thanks

Sent you a PM.

[Dustmaker65]

Originally Posted by wahl4m

need a cut around the heel of the gas pedal area say 8" right .left ,up & back of the 2 ball sockets of the gas pedal area ! anything good there in a cab ?

Here is what I have in that area. Very solid except at ball sockets have a couple small holes. Up to you?

Text me if you want it ASAP as these will be gone soon.
Cell number 309-231-4082

[Bennett68C10]

Jimmy, besides the firewall cut I need the bottom of the windshield channels on both sides. Basically a lot like the piece you cut out for rwade but the bottom channel!

[Dustmaker65]

Originally Posted by 6T7NCHVYC10

Pic and price shipped to 31321.

Pic of gas hole patch.

[Dustmaker65]

Originally Posted by Bennett68C10

Jimmy, besides the firewall cut I need the bottom of the windshield channels on both sides. Basically a lot like the piece you cut out for rwade but the bottom channel!

I have your bottoms cut off already. Do you need any of the fan hole area?

[Bennett68C10]

Yeah, I have some rust on the lower right side of that area. Just include the fan hole area in the firewall cut!

[Dustmaker65]

Originally Posted by Bennett68C10

Yeah, I have some rust on the lower right side of that area. Just include the fan hole area in the firewall cut!

Sent ya a PM.

Here is what I am thinking you want.....

[Bennett68C10]

Originally Posted by Dustmaker65

Sent ya a PM.

Here is what I am thinking you want.....

Yeah that looks good Jimmy

[Dustmaker65]

Originally Posted by Bennett68C10

Yeah that looks good Jimmy

Here is kick panel on pass side. Been patched at floor.

[Bennett68C10]

That kick panel looks good Jimmy, I don't need the whole thing, just around the vent hole! However it is easiest for you to cut it out, I'll take that with the other parts!

[6T7NCHVYC10]

I'll take the fill hole patch

[gmc 2500 4x4]

Originally Posted by Dustmaker65

PM sent. I may have one after all.

Jimmy

i didnt get a pm

[Dustmaker65]

Originally Posted by gmc 2500 4x4

i didnt get a pm

Tried again... Will post a pic soon.

[Dustmaker65]

Originally Posted by 6T7NCHVYC10

I'll take the fill hole patch

Here it is!

[Dustmaker65]

Originally Posted by Bennett68C10

That kick panel looks good Jimmy, I don't need the whole thing, just around the vent hole! However it is easiest for you to cut it out, I'll take that with the other parts!

Here are yours Keith.

[6T7NCHVYC10]

That should do it. Thanks, Jimmy

[Bennett68C10]

Originally Posted by Dustmaker65

Here are yours Keith.

Looks good Jimmy! Let me know how much with shipping to 08753 and I'll send payment over!

[wahl4m]

i will pass on the floor around the gas pedal/yours looks worst than mine ! thanks anyway mike

[6T7NCHVYC10]

Payment sent for fill patch. Thanks, Jimmy

[waylonbud]

Hello Jimmy,
I will take the lwb frame.
Thank you.

[Dustmaker65]

Originally Posted by waylonbud

Hello Jimmy,
I will take the lwb frame.
Thank you.

Sounds great! I will PM you my info.

Thanks!
Jimmy