OH 72 c30 longhorn parting

[Dirt's72]

Interested in the windshield if original soft ray tint and no cracks if you would ship. Also the fuel line from fuel pump to carb. And ac vent balls if they have nice chrome and windshield washer fluid bracket. Thanks.

[Theboatandcarman]

looking for no spin ho52/ho72 4.10 rear axle center section (i said same on facebook)

[jaybatta]

I think I'm #3 in line for the aux battery tray ando mounting bolts shipped to Livingston mt 59047.
Thanks

Joe

[rsmarr1982]

I'm trying to get as much removed on truck while it's daylight I will respond to everyone tonight.

[rsmarr1982]

Originally Posted by Kemp16V

Are there any rust holes in the auxiliary battery tray? What are you asking for it?

No rust holes , has fasteners. Just surface email rust asking $100 plus shipping.

[rsmarr1982]

Originally Posted by Theboatandcarman

looking for no spin ho52/ho72 4.10 rear axle center section (i said same on facebook)

Rear is gone before I posted truck

[rsmarr1982]

Originally Posted by Dirt's72

Interested in the windshield if original soft ray tint and no cracks if you would ship. Also the fuel line from fuel pump to carb. And ac vent balls if they have nice chrome and windshield washer fluid bracket. Thanks.

Windshield is cracked. I will take a pic later of vents

[rsmarr1982]

Originally Posted by randy500

Does the radio work?
How much for the following
Door Panels
Seat belts if retractor covers are good
Carburetor, can you get the number off it?
A/C brackets

A/c brackets are pending locally. Door panels where sold before posting. Seat belts are missing. Carb is avaliable.

[rsmarr1982]

Originally Posted by DeadheadNM

Interesed in the ac firewall box w screws etc pending cost and condition including metal backing. Thanks, pete

Are you wanting just the external parts on out side of firewall?

[sherm6413]

windshield trim available? price?

[rsmarr1982]

Originally Posted by Dave

Getting in line on the aux battery tray with wiring.

Interested in the aux fuel tank cover in the bed and the bed side opening also the dash switch for aux fuel too.

Also interested in the windshield washer brkt on the pass. fender

Lmk prices, thanks.

The inside cover has rust I will remove it tomorrow and see if it use able . Are wanting the filler neck?

[rsmarr1982]

Originally Posted by undertaker72

hows the pass front fender I need one that color , is it roached like the driver one

It's trashed

[rsmarr1982]

Originally Posted by bulky

Hi,

I'd be interested in the parts circled in red in this picture. Along with any hoses & connections attached to them.

Thanks

Make me an offer I guess they are for the air horn

[jaybatta]

Originally Posted by rsmarr1982

Make me an offer I guess they are for the air horn

They're cruise control parts

[rsmarr1982]

Originally Posted by jaybatta

They're cruise control parts

I've never had a truck with cruise but I can tell you that the yellow line goes to a horn on the front crossmember

[DeadheadNM]

Originally Posted by rsmarr1982

Are you wanting just the external parts on out side of firewall?

The fiberglass box is mostly what I'm after plus the spring inside the cowl for flapper. The metal on the backside of the fiberglass box can get rusty - curious if solid. Any attachment bolts screws would be helpful. Thanks.

[rsmarr1982]

Originally Posted by DeadheadNM

The fiberglass box is mostly what I'm after plus the spring inside the cowl for flapper. The metal on the backside of the fiberglass box can get rusty - curious if solid. Any attachment bolts screws would be helpful. Thanks.

Hope your not in a hurry . I will try to get it off this week and check it out. You will be first in line once I find out condition.

[Dave]

Originally Posted by rsmarr1982

The inside cover has rust I will remove it tomorrow and see if it use able . Are wanting the filler neck?

Ok lmk on the inside cover. Yes on the outer opening, I need that opening for (patch-in) on the bedside and probably the fill tube if any good. Still need a price on the windshield washer brkt as mentioned in my 1st post.
Thanks

[DeadheadNM]

Originally Posted by rsmarr1982

Hope your not in a hurry . I will try to get it off this week and check it out. You will be first in line once I find out condition.

Not in any rush at all thanks. Let me know about the other pieces too when possible. Thanks, Pete

[DeadheadNM]

Also, if that's an air horn and complete in interested in it - lmk when poss. Thanks.

[rsmarr1982]

Originally Posted by DeadheadNM

Not in any rush at all thanks. Let me know about the other pieces too when possible. Thanks, Pete

Dash pad has a crack in it. Side maker light are beat up pretty good.

[rsmarr1982]

Originally Posted by sherm6413

how much for stainless trim on front windshield shipped to 63401? Any dings or dents in it?

in very good condition $150 shipped sound good?

[rsmarr1982]

Engine, carb, alternator and power steering. Pending sale

[DeadheadNM]

Originally Posted by rsmarr1982

Dash pad has a crack in it. Side maker light are beat up pretty good.

I'll pass on these then thanks.

If the radiator cap is OEM I'd be interested in that. Also, any nuts bolts screws clips or clamps that come off in disassembly I'd be interested in - can be tossed into a can. Would like the screws for the upper rad mounts and transmission cover particularly.

[Kemp16V]

I will pass on the auxiliary battery tray.

Thanks
Andy