1986 C10 Project "Winchester" - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ultrahd4me · 12-11-2017, 10:07 AM

UKNOWME if the truck is going to my dealer then it will stay as is. But If I go on the open market with it I will take it to a little higher level truck. I'll change the drop kit, seat, dash pad, and maybe a blazer bumper.

UKNOWME · 12-11-2017, 10:54 AM

Sounds like a plan!

ultrahd4me · 12-11-2017, 06:54 PM

I finally had a few minutes to pull the truck out and get a better look with the wheels and tires.

Desert1957 · 12-13-2017, 10:09 AM

Are you still using the 285's on the rear? I know your other builds had the smaller tires. Looks great like always.

ultrahd4me · 12-13-2017, 10:26 AM

Yes sir, 285/50 on the rear and 245/45 upfront.

UKNOWME · 01-03-2018, 01:34 AM

Quote:

Originally Posted by ultrahd4me

Yes sir, 285/50 on the rear and 245/45 upfront.

What brand are you using now? I don’t see a 285 with the Desert Hawk tire.

ultrahd4me · 01-04-2018, 12:01 PM

UKNOWME I'm using a Venezia 245/45 and a 285/50, but you can get the same size in the Desert Hawk as I've bought them before. The Venezia tires have a matching side wall but the center tread is a little different.

ultrahd4me · 01-07-2018, 05:26 PM

This project is finally finished and hopefully heading to its new owner next week. I just finished a little detail work in the inner fenders and engine compartment. I also had some paint and bodywork finished earlier this week. All in all it turned out to be a real nice truck that was a easy project. So after a quick photoshoot the hunt for the next one starts now.

ultrahd4me · 01-07-2018, 05:28 PM

And one more to wrap it up.

UKNOWME · 01-07-2018, 06:30 PM

Turned out great even without having to do the extra mods! Congrats on the sale and as always I’ll be eagerly anticipating the next one.

ultrahd4me · 01-08-2018, 09:09 AM

UKNOWME thanks sir. It may end up on the open market after all, I'll know for sure by midweek.

**TKCR** · 01-08-2018, 10:01 AM

Truck turned out very nice. But I have to admit, I don't like that single headlight setup and grille. I really like seeing the Bowtie on the grille. I know it's just my opinion, well more like my preference. Everyone has their own

808_67C10 · 01-12-2018, 11:31 AM

Quote:

Originally Posted by TKCR

Truck turned out very nice. But I have to admit, I don't like that single headlight setup and grille. I really like seeing the Bowtie on the grille. I know it's just my opinion, well more like my preference. Everyone has their own

+1 I agree... it is missing the bowtie for sure! Kinda looks naked without it.

Super nice though...

ultrahd4me · 01-12-2018, 02:49 PM

THAT'S

Thanks guys.

77c10 · 01-25-2018, 09:40 AM

Did you sell this one yet, Bobby? I've been meaning to text you. I pass a super clean one sitting on Hwy 109 in Wilson County every day on the way to and from work. Not sure it is for sale but I'll get you the address.

ultrahd4me · 01-25-2018, 04:53 PM

Yes sir its SOLD. I looked at a black & silver 86 last weekend that sits on 109 for sale sometimes, OK truck but I can't give what he wants.

jimboh247 · 01-25-2018, 05:44 PM

What a beautiful truck. I bet our Northern brethern look at the floor pans of your projects and drool!

12-11-2017, 10:07 AM	#26
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: 1986 C10 Project "Winchester" UKNOWME if the truck is going to my dealer then it will stay as is. But If I go on the open market with it I will take it to a little higher level truck. I'll change the drop kit, seat, dash pad, and maybe a blazer bumper. __________________ Follow me on Instagram: @midtennc10 Youtube channel: Midtennc10

12-11-2017, 10:54 AM	#27
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: 1986 C10 Project "Winchester" Sounds like a plan! __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

12-11-2017, 06:54 PM	#28
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: 1986 C10 Project "Winchester" I finally had a few minutes to pull the truck out and get a better look with the wheels and tires. Attached Images __________________ Follow me on Instagram: @midtennc10 Youtube channel: Midtennc10

12-13-2017, 10:09 AM	#29
Desert1957 Registered User Join Date: Apr 2009 Location: New Freedom Pa. Posts: 1,335	Re: 1986 C10 Project "Winchester" Are you still using the 285's on the rear? I know your other builds had the smaller tires. Looks great like always. __________________ Desert

12-13-2017, 10:26 AM	#30
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: 1986 C10 Project "Winchester" Yes sir, 285/50 on the rear and 245/45 upfront. __________________ Follow me on Instagram: @midtennc10 Youtube channel: Midtennc10

01-04-2018, 12:01 PM	#32
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: 1986 C10 Project "Winchester" UKNOWME I'm using a Venezia 245/45 and a 285/50, but you can get the same size in the Desert Hawk as I've bought them before. The Venezia tires have a matching side wall but the center tread is a little different. __________________ Follow me on Instagram: @midtennc10 Youtube channel: Midtennc10

01-07-2018, 05:26 PM	#33
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: 1986 C10 Project "Winchester" This project is finally finished and hopefully heading to its new owner next week. I just finished a little detail work in the inner fenders and engine compartment. I also had some paint and bodywork finished earlier this week. All in all it turned out to be a real nice truck that was a easy project. So after a quick photoshoot the hunt for the next one starts now. Attached Images __________________ Follow me on Instagram: @midtennc10 Youtube channel: Midtennc10

01-07-2018, 05:28 PM	#34
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: 1986 C10 Project "Winchester" And one more to wrap it up. Attached Images __________________ Follow me on Instagram: @midtennc10 Youtube channel: Midtennc10

01-07-2018, 06:30 PM	#35
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: 1986 C10 Project "Winchester" Turned out great even without having to do the extra mods! Congrats on the sale and as always I’ll be eagerly anticipating the next one. __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

01-08-2018, 09:09 AM	#36
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: 1986 C10 Project "Winchester" UKNOWME thanks sir. It may end up on the open market after all, I'll know for sure by midweek. __________________ Follow me on Instagram: @midtennc10 Youtube channel: Midtennc10

01-08-2018, 10:01 AM	#37
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,978	Re: 1986 C10 Project "Winchester" Truck turned out very nice. But I have to admit, I don't like that single headlight setup and grille. I really like seeing the Bowtie on the grille. I know it's just my opinion, well more like my preference. Everyone has their own __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

01-12-2018, 02:49 PM	#39
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: 1986 C10 Project "Winchester" THAT'S Thanks guys. __________________ Follow me on Instagram: @midtennc10 Youtube channel: Midtennc10

01-25-2018, 09:40 AM	#40
77c10 Registered User Join Date: Aug 2011 Location: Gallatin, TN Posts: 782	Re: 1986 C10 Project "Winchester" Did you sell this one yet, Bobby? I've been meaning to text you. I pass a super clean one sitting on Hwy 109 in Wilson County every day on the way to and from work. Not sure it is for sale but I'll get you the address. __________________ 77 C10, 6.0LS/4L80E, 3:73 12 bolt. Boss 338's 20" x 10" w/ 285/50/20 rear. 20" x 8.5" w/ 245/40/20 front. Vintage Air. Full Autometer gauges recessed in factory bezel (Thanks bigblock73!) Gm Storm Grey Metallic paint "Cool ain't ever cheap and cheap ain't ever cool"

01-25-2018, 04:53 PM	#41
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: 1986 C10 Project "Winchester" Yes sir its SOLD. I looked at a black & silver 86 last weekend that sits on 109 for sale sometimes, OK truck but I can't give what he wants. __________________ Follow me on Instagram: @midtennc10 Youtube channel: Midtennc10

01-25-2018, 05:44 PM	#42
jimboh247 Registered User Join Date: May 2011 Location: Lexington, NC Posts: 157	Re: 1986 C10 Project "Winchester" What a beautiful truck. I bet our Northern brethern look at the floor pans of your projects and drool! __________________ '85 SWB Silverado



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.