AL Cutting up 65 cab

[Mack B]

Originally Posted by ScottH

Appreciate ur help on this. The easiest way would be from the open seam to where it ends under the seat. On the sides if u could cut it where it meets the flat floor area on both sides that should work. LMK if that isnt clear & what u need for the patch.

Thanks
Scott

Is this to far back or you need it further back? I'm guessing shipping weight to be about 15lbs (I could be off it's been a while) that puts shipping at $35 for a total of $50. If that's in the ball park of what you had in mind I'll cut it out, box it and get a definite price on shipping to you.

[Mack B]

Originally Posted by aotte1

Interest in big back window section, condition and pics of it.
What price do you want?

Les

I'm using that on my project, that's the reason I bought this truck. Sorry about that.

[Mack B]

Originally Posted by MikeG.

I want the Whole dash from door to door

I figured 40lb shipping weight (someone set me straight if I'm way off) and it came up to $100.00 for shipping for a total of $115. Let me know if you are interested, I'll cut it out and get a definite shipping price

[Mack B]

Originally Posted by jasons

I think I can work with that. I'd take from the instrument panel opening to the glove box opening and a few inches on the top. Kind of like this, a couple more inches to each side would be good.

Mikeg did ask about the whole dash first, I thought the condition would have turned him away so I am sorry to jumble everything up. If he doesn't say he wants it by Friday, I'll cut the center out for you.

[ScottH]

Thanks 4 the pic mack, let me check mine again 2 b sure on the length.
Will get back 2 u.

Scott

[Mack B]

Originally Posted by fredhlynch2

Need bracket and pedals for the brake and clutch. Zip code is 54935

Let me make sure everything is there, and I'll get you a shipping quote this weekend.

[aotte1]

Big back window install adhesive and tools

[aotte1]

Tools

[ScottH]

Mack, finally had a chance to check out my floor (had to remove several "patches"). What u have outlined looks close. On the back section I only need to where it begins to slope down & starts to narrow. Also on the sides if u can include around 3" of the floor on the drivers side in the area where the hole is cut , that would be great. Shipping is to 08753.

Thanks very much.
Scott

[Mack B]

Originally Posted by fredhlynch2

Need bracket and pedals for the brake and clutch. Zip code is 54935

Is this the only peices you need? If so $50.00 to your door. And I'm going to need to find a box.

[Mack B]

Originally Posted by jasons

I think I can work with that. I'd take from the instrument panel opening to the glove box opening and a few inches on the top. Kind of like this, a couple more inches to each side would be good.

I got this cut out. Of course I made things worse by cutting into the ashtray bracket. If you still want it, its $30.00 to your door

[Mack B]

Originally Posted by ScottH

Mack, finally had a chance to check out my floor (had to remove several "patches"). What u have outlined looks close. On the back section I only need to where it begins to slope down & starts to narrow. Also on the sides if u can include around 3" of the floor on the drivers side in the area where the hole is cut , that would be great. Shipping is to 08753.

Thanks very much.
Scott

Hey Scott, the passenger side was in worse shape than it appeared, the middle is decent, where it meets the toe board and the step up to go under the seat though are rough. If this still fits your needs and you want it it's $50.00 to your door, if you need a better piece I understand that as well.

Thanks!

[62 short step]

I'll get in line for the dash/radio cut out.

[DPowers]

Originally Posted by Mack B

I need the brackets for my project, but I will get the panel to your door for $30.00

Thanks and understand-will pass.

[ScottH]

Mack, thanks 4 the pics. I should be able to make that work.
Send me ur paypal info & I will send u payment.

Scott

[jasons]

I'll take it. What's your paypal info?

Originally Posted by Mack B

I got this cut out. Of course I made things worse by cutting into the ashtray bracket. If you still want it, its $30.00 to your door

[Mack B]

ScottH and Jasons, y'all both have pm's. Thanks!

[TimE]

How is the roof top panel? Is it rotten around the gutter edges? If it's solid(but what in south AL is though, right?)let me know a price. If you're not too far of a drive, I could pick it up.

[Mack B]

Originally Posted by TimE

How is the roof top panel? Is it rotten around the gutter edges? If it's solid(but what in south AL is though, right?)let me know a price. If you're not too far of a drive, I could pick it up.

Hello sir! The roof on this one is junk, but the gentleman that I got this truck from had another that was in better shape. He likely won't cut it off but expressed interest in selling the whole truck a few weeks ago. I could get you his number and possibly get some pictures if that interests you.

There is another (or was, been a while) in a yard just across the state line in Bratt Florida that was wrecked in the rear but the sheet metal was pretty solid otherwise.

I'm about 20 miles north east of Bay Minette. Happy to help anyway I can.

[TimE]

Cool! I hit you up in a PM...

[Mack B]

Originally Posted by TimE

Cool! I hit you up in a PM...

Tim, I didn't see this message, also I didn't get a pm. Just didn't want you to think I was ignoring you.

[made2drag]

I need the driver door. I'm near Montgomery al

[Mack B]

Originally Posted by made2drag

I need the driver door. I'm near Montgomery al

If you have a door already it's likely as good as this one or better. I also cut the lower inside door panel off for another member already.

[made2drag]

Originally Posted by Mack B

If you have a door already it's likely as good as this one or better. I also cut the lower inside door panel off for another member already.

I bought a 64 with no driver door, so any door is better than nothing .... how much do you need for it?

[ScottH]

Mack, any chance the steering column is available?