MD Suburban metal cuts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71blksuper4x4** · 10-27-2019, 05:06 PM

What is circled in red Richard....needing the last 3-4" of roof from drip rail flange to 1/2" above body line. Need around 40" of length.

**richard2717** · 10-27-2019, 05:17 PM

I really don't know why I am being so dense on this, I just keep looking at the pic you posted and it looks like you need the part i have the yellow arrow at. Or is that what you were trying to cut and went too high into the roof half?

.

**richard2717** · 10-27-2019, 05:19 PM

I think i am going to go lay down and revisit it in the morning.

**71blksuper4x4** · 10-27-2019, 10:14 PM

Hey Richard, this is what I am trying to fill in. This should explain I need the drip rail flange on the roof that gets spot welded to the drip railing. Then I am asking you to cut it just above the extra body line that a Burb roof has. I burnt through one of mine when I was trying to remove it.

**richard2717** · 10-28-2019, 07:55 AM

Josh
$75 shipped for both pcs

.

**richard2717** · 10-28-2019, 07:57 AM

Trevor,
I am understanding what you need. I will get it cut out later today. $25 plus shipping. Not sure if I still have your address but should be able to locate on PP

Richard

**richard2717** · 10-28-2019, 03:27 PM

Quote:

Originally Posted by 71blksuper4x4

Hey Richard, this is what I am trying to fill in. This should explain I need the drip rail flange on the roof that gets spot welded to the drip railing. Then I am asking you to cut it just above the extra body line that a Burb roof has. I burnt through one of mine when I was trying to remove it.

Trevor
Here is what I cut out. I unbolted it from the lower half. The pc is just shy of 48" just bc it made no difference in the shipping cost from 40''. anything longer than 48'' and the cost almost doubled being over sized. If I did not cut it correctly I still have the entire driver side to try again lol. $55 shipped if it is correct. PP in my sig below

Thanks

.

**71blksuper4x4** · 10-28-2019, 08:08 PM

Quote:

Originally Posted by richard2717

Trevor
Here is what I cut out. I unbolted it from the lower half. The pc is just shy of 48" just bc it made no difference in the shipping cost from 40''. anything longer than 48'' and the cost almost doubled being over sized. If I did not cut it correctly I still have the entire driver side to try again lol. $55 shipped if it is correct. PP in my sig below

Thanks

.

Perfect Richard, PayPal sent. Thanks again, Trevor

**richard2717** · 10-28-2019, 08:47 PM

Got it and it will ship in the morning as well. Thanks

**71blksuper4x4** · 11-02-2019, 11:53 AM

Thanks Richard, I got the piece yesterday. Looks great. Trevor

**71blksuper4x4** · 11-22-2019, 08:11 PM

Richard did you end up scrapping these out? Trevor

**richard2717** · 11-22-2019, 08:14 PM

Quote:

Originally Posted by 71blksuper4x4

Richard did you end up scrapping these out? Trevor

I still have quite a bit

**71blksuper4x4** · 11-23-2019, 12:14 AM

Richard, I may be needing a 8-10” piece of inner pillar off a driver’s inner b pillar. I’ll let you know tomorrow.

**richard2717** · 11-23-2019, 02:33 PM

Quote:

Originally Posted by 71blksuper4x4

Richard, I may be needing a 8-10” piece of inner pillar off a driver’s inner b pillar. I’ll let you know tomorrow.

here is pics of what is left both have been cut pretty much flush at the front of them heading towards the A pillar

.

**71blksuper4x4** · 11-23-2019, 03:41 PM

Actually Richard, those are perfect for me. I am working on finishing my inner roof and need pieces to transition from the pillars to the I need roof as shown. Before I finish welding and grinding, I wanted to get a game plan.

**richard2717** · 11-23-2019, 05:46 PM

So you basically only need the inner metal overlay like I have boxed here, or do you need the entire thickness of it all the way to the outside roof?

DO you need any of the horizontal cover above the doors?

.

**71blksuper4x4** · 11-24-2019, 12:00 AM

Basically, that is all I need Richard. I do not need any of the pieces above the door. I already have my whole inner roof mocked up other than finishing it out and these pieces. If you can cut out both of those for me as I need two for each side. Maybe 3" inches below the door weatherstrip channel intersection but above the shoulder harness hole. Thanks Trevor

shume · 11-24-2019, 12:10 PM

Looking for drivers side rear frame section from axle crossmember to bumper. I need it for a Blazer. If you have one from Suburban hoping it might work.

**richard2717** · 11-24-2019, 12:18 PM

The tail end of the suburban is different from the 72' Blazers. Here are a couple pictures to show the difference. If your Blazer is 69-71 the frame just cuts off flat at the rear but I do not have one here to verify if they are indeed swapable.

1st picture shows suburban tail end

Name: 20190920_153629_resized.jpg
Views: 412
Size: 83.8 KB

Name: 20190920_153629_resized.jpg
Views: 412
Size: 83.8 KB

2nd pic shows how the blazer turns down a lot sharper. This frame is not for sale. You might check with 1Rippen6 he usually has some blazer stuff

Name: 20190920_153619_resized.jpg
Views: 454
Size: 60.7 KB

Name: 20190920_153619_resized.jpg
Views: 454
Size: 60.7 KB

shume · 11-24-2019, 02:37 PM

Thanks. With the turn down on Blazer not sure I could make the Suburban piece work.

**71blksuper4x4** · 11-26-2019, 10:30 PM

Hey Richard, these would work.

**kev2809** · 12-25-2019, 04:54 PM

are ya still parting these out? i need this section, its driver side back wheel arch area.. piece i used did not have the wheel arch indention..

**richard2717** · 12-26-2019, 06:06 PM

Quote:

Originally Posted by kev2809

are ya still parting these out? i need this section, its driver side back wheel arch area.. piece i used did not have the wheel arch indention..

Missed this with the holidays. I do not have ant good lower metal, everything is rusty or totally gone

**kev2809** · 12-27-2019, 12:27 AM

Quote:

Originally Posted by richard2717

Missed this with the holidays. I do not have ant good lower metal, everything is rusty or totally gone

ok thanks for checkin!

ajgriffin · 01-11-2020, 11:31 PM

I see you said you don't have any good lower metal, what about the driver's rear wheel well? I need a small section at the front, 4" up and 3" toward the rear to include the corner.

Name: Wheel Tub.jpg
Views: 483
Size: 70.1 KB

Name: Wheel Tub.jpg
Views: 483
Size: 70.1 KB

I can take a better picture with tape on the wheel well if it would communicate better. This is the area I'm trying to patch.

Name: Wheel Tub1.jpg
Views: 566
Size: 49.5 KB

Name: Wheel Tub1.jpg
Views: 566
Size: 49.5 KB

10-27-2019, 05:06 PM	#26
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Suburban metal cuts What is circled in red Richard....needing the last 3-4" of roof from drip rail flange to 1/2" above body line. Need around 40" of length. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

10-27-2019, 05:17 PM	#27
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: Suburban metal cuts I really don't know why I am being so dense on this, I just keep looking at the pic you posted and it looks like you need the part i have the yellow arrow at. Or is that what you were trying to cut and went too high into the roof half? . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

10-27-2019, 05:19 PM	#28
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: Suburban metal cuts I think i am going to go lay down and revisit it in the morning. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

10-27-2019, 10:14 PM	#29
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Suburban metal cuts Hey Richard, this is what I am trying to fill in. This should explain I need the drip rail flange on the roof that gets spot welded to the drip railing. Then I am asking you to cut it just above the extra body line that a Burb roof has. I burnt through one of mine when I was trying to remove it. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

10-28-2019, 07:55 AM	#30
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: Suburban metal cuts Josh $75 shipped for both pcs . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

10-28-2019, 07:57 AM	#31
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: Suburban metal cuts Trevor, I am understanding what you need. I will get it cut out later today. $25 plus shipping. Not sure if I still have your address but should be able to locate on PP Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

10-28-2019, 08:47 PM	#34
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: Suburban metal cuts Got it and it will ship in the morning as well. Thanks __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

11-02-2019, 11:53 AM	#35
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Suburban metal cuts Thanks Richard, I got the piece yesterday. Looks great. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

11-22-2019, 08:11 PM	#36
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Suburban metal cuts Richard did you end up scrapping these out? Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

11-23-2019, 12:14 AM	#38
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Suburban metal cuts Richard, I may be needing a 8-10” piece of inner pillar off a driver’s inner b pillar. I’ll let you know tomorrow. __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

11-23-2019, 03:41 PM	#40
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Suburban metal cuts Actually Richard, those are perfect for me. I am working on finishing my inner roof and need pieces to transition from the pillars to the I need roof as shown. Before I finish welding and grinding, I wanted to get a game plan. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

11-23-2019, 05:46 PM	#41
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: Suburban metal cuts So you basically only need the inner metal overlay like I have boxed here, or do you need the entire thickness of it all the way to the outside roof? DO you need any of the horizontal cover above the doors? . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

11-24-2019, 12:00 AM	#42
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Suburban metal cuts Basically, that is all I need Richard. I do not need any of the pieces above the door. I already have my whole inner roof mocked up other than finishing it out and these pieces. If you can cut out both of those for me as I need two for each side. Maybe 3" inches below the door weatherstrip channel intersection but above the shoulder harness hole. Thanks Trevor Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever Last edited by 71blksuper4x4; 11-24-2019 at 12:10 AM.

11-24-2019, 12:10 PM	#43
shume Registered User Join Date: Nov 2013 Location: Ridgeland, MS Posts: 35	Re: Suburban metal cuts Looking for drivers side rear frame section from axle crossmember to bumper. I need it for a Blazer. If you have one from Suburban hoping it might work.

11-24-2019, 12:18 PM	#44
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: Suburban metal cuts The tail end of the suburban is different from the 72' Blazers. Here are a couple pictures to show the difference. If your Blazer is 69-71 the frame just cuts off flat at the rear but I do not have one here to verify if they are indeed swapable. 1st picture shows suburban tail end 2nd pic shows how the blazer turns down a lot sharper. This frame is not for sale. You might check with 1Rippen6 he usually has some blazer stuff __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.



Register or Log In To remove these advertisements.

11-24-2019, 02:37 PM	#45
shume Registered User Join Date: Nov 2013 Location: Ridgeland, MS Posts: 35	Re: Suburban metal cuts Thanks. With the turn down on Blazer not sure I could make the Suburban piece work.

11-26-2019, 10:30 PM	#46
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Suburban metal cuts Hey Richard, these would work. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

12-25-2019, 04:54 PM	#47
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,174	Re: Suburban metal cuts are ya still parting these out? i need this section, its driver side back wheel arch area.. piece i used did not have the wheel arch indention.. Attached Images __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-11-2020, 11:31 PM	#50
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 585	Re: Suburban metal cuts I see you said you don't have any good lower metal, what about the driver's rear wheel well? I need a small section at the front, 4" up and 3" toward the rear to include the corner. I can take a better picture with tape on the wheel well if it would communicate better. This is the area I'm trying to patch. __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

Register or Log In To remove these advertisements.