And so it begins 1967 SWB out of the ashes rebuild - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68cajun · 03-19-2020, 07:47 AM

I have been told to work from home due to the COVID-19 scare so I couldn’t help but mess with the truck just a little. Got the dash all squared away before I weld it back in the truck. Cut the holes for stereo and A /C controls. Tried the dash pad from TMI. I think its going to look great.

BlouDon · 03-19-2020, 09:38 AM

Quote:

Originally Posted by 68cajun

I have been told to work from home due to the COVID-19 scare so I couldn’t help but mess with the truck just a little.

Your boss is going to read this and deduct today from your leave...

68cajun · 03-29-2020, 05:47 PM

Got a bit done this weekend. Removed front cap, cab, engine, disassembled chassis. Cleaned and buffed chassis and got it painted black. I had the frame blasted and primed 15 yrs ago. Man storage is hard on a vehicle.

68cajun · 03-29-2020, 05:48 PM

Frame painted black,

68Gold/white · 03-29-2020, 06:30 PM

Quote:

Originally Posted by BlouDon

Your boss is going to read this and deduct today from your leave...

LOL, I was thinking same!!!

68cajun · 04-04-2020, 04:29 PM

Bed floor repair complete and primed both top and bottom. Buffed all the front suspension components and got them painted black and silver. Should start reassembly of the chassis soon.

Big H · 04-05-2020, 06:56 PM

Your build looks to be moving along well.

On your old truck's engine, is that a factory GM serpentine system?

**Ol Blue K20** · 04-05-2020, 07:34 PM

I agree, coming along nicely.

68cajun · 04-05-2020, 08:39 PM

Quote:

Originally Posted by Big H

Your build looks to be moving along well.

On your old truck's engine, is that a factory GM serpentine system?

Yes that is I put it on about 12 yrs ago. I have a March performance from the burned truck that I’m using.

68cajun · 04-05-2020, 08:41 PM

Got the front suspension back together today.

68cajun · 04-14-2020, 03:22 PM

Got my rear differential rebuilt toady with the exception of new axles that have not come in yet.

68cajun · 04-16-2020, 06:07 PM

Axles came in today hopefully I can get the rear end back on the frame this weekend.

68cajun · 04-20-2020, 01:52 PM

Rear end back together and on the frame, steering box cleaned up and back on the frame, motor mounts cleaned up painted and back on the frame. Next up fuel tank and fuel lines. Also ordered new brake lines.

**Getter-Done** · 04-20-2020, 11:14 PM

Quote:

Originally Posted by 68cajun

Got my rear differential rebuilt toady with the exception of new axles that have not come in yet.

I like the pictures of your ring and pinion set-up

Also the angle bracket you used to make a Rigid setup.

.

68cajun · 04-21-2020, 07:59 PM

Fuel tank, pump and lines in place.

68cajun · 05-04-2020, 02:27 PM

Started cleaning and painting the engine and March performance serpentine setup. The old clear powder coat was starting to fail so I blasted them then sanded and I kinda like the brushed look but it would be difficult to maintain. Gonna powder coat them with a chrome looking powder.

Big70 · 05-04-2020, 11:36 PM

Quote:

Originally Posted by 68cajun

I have a question for you guys. Several years ago I came across a dash panel and glove box door made of wood that is pretty amazing. I ran a poll asking opinions on which one I should use the wooden one or a stock with the auto meter gauges that came with the wood panel. The general population said the stock panel with the gauges looked best. So my plan has changed some and I still think the original panel and auto meter gauges would look best. I will have a TMI dove grey interior with gunmetal grey carpet and silver paint in the cab. Which one do you think would look best. Also thinking of selling the wooden one if I don’t use it.

Did you take a stock bezel and cut it for the gauges or is that after market?

68cajun · 05-05-2020, 07:17 AM

Quote:

Originally Posted by Big70

Did you take a stock bezel and cut it for the gauges or is that after market?

It’s a stock or reproduction that I cut to get the gauges in.

Big70 · 05-05-2020, 02:39 PM

Quote:

Originally Posted by 68cajun

It’s a stock or reproduction that I cut to get the gauges in.

That is really clean and that’s what I want to do!!!

68cajun · 05-05-2020, 09:35 PM

Playing with some powder coat

68cajun · 05-06-2020, 08:56 PM

Got a Lil more powder coating done today

Big70 · 05-06-2020, 11:59 PM

Quote:

Originally Posted by 68cajun

I have been told to work from home due to the COVID-19 scare so I couldn’t help but mess with the truck just a little. Got the dash all squared away before I weld it back in the truck. Cut the holes for stereo and A /C controls. Tried the dash pad from TMI. I think its going to look great.

What size gauges are you running in that cluster? Did it take much cutting or did you just cut out the recessed area in each hole?

68cajun · 05-11-2020, 01:24 PM

Coming together!

68cajun · 05-11-2020, 01:41 PM

Coming together!

68cajun · 05-11-2020, 09:27 PM

Got bored and built a SS battery tray that mounts in the stock location

03-19-2020, 07:47 AM	#26
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: And so it begins 1967 SWB out of the ashes rebuild I have been told to work from home due to the COVID-19 scare so I couldn’t help but mess with the truck just a little. Got the dash all squared away before I weld it back in the truck. Cut the holes for stereo and A /C controls. Tried the dash pad from TMI. I think its going to look great. Attached Images __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

03-29-2020, 05:47 PM	#28
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: And so it begins 1967 SWB out of the ashes rebuild Got a bit done this weekend. Removed front cap, cab, engine, disassembled chassis. Cleaned and buffed chassis and got it painted black. I had the frame blasted and primed 15 yrs ago. Man storage is hard on a vehicle. Attached Images __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

03-29-2020, 05:48 PM	#29
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: And so it begins 1967 SWB out of the ashes rebuild Frame painted black, Attached Images __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

04-04-2020, 04:29 PM	#31
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: And so it begins 1967 SWB out of the ashes rebuild Bed floor repair complete and primed both top and bottom. Buffed all the front suspension components and got them painted black and silver. Should start reassembly of the chassis soon. Attached Images __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

04-05-2020, 06:56 PM	#32
Big H Registered User Join Date: Nov 2006 Location: South OC, CA Posts: 47	Re: And so it begins 1967 SWB out of the ashes rebuild Your build looks to be moving along well. On your old truck's engine, is that a factory GM serpentine system? __________________ Cleverly disguised as a responsible adult...

04-05-2020, 07:34 PM	#33
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,255	Re: And so it begins 1967 SWB out of the ashes rebuild I agree, coming along nicely. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

04-05-2020, 08:41 PM	#35
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: And so it begins 1967 SWB out of the ashes rebuild Got the front suspension back together today. Attached Images __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

04-14-2020, 03:22 PM	#36
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: And so it begins 1967 SWB out of the ashes rebuild Got my rear differential rebuilt toady with the exception of new axles that have not come in yet. Attached Images __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

04-16-2020, 06:07 PM	#37
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: And so it begins 1967 SWB out of the ashes rebuild Axles came in today hopefully I can get the rear end back on the frame this weekend. __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

04-20-2020, 01:52 PM	#38
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: And so it begins 1967 SWB out of the ashes rebuild Rear end back together and on the frame, steering box cleaned up and back on the frame, motor mounts cleaned up painted and back on the frame. Next up fuel tank and fuel lines. Also ordered new brake lines. Attached Images __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

04-21-2020, 07:59 PM	#40
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: And so it begins 1967 SWB out of the ashes rebuild Fuel tank, pump and lines in place. Attached Images __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

05-04-2020, 02:27 PM	#41
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: And so it begins 1967 SWB out of the ashes rebuild Started cleaning and painting the engine and March performance serpentine setup. The old clear powder coat was starting to fail so I blasted them then sanded and I kinda like the brushed look but it would be difficult to maintain. Gonna powder coat them with a chrome looking powder. Attached Images __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

05-05-2020, 09:35 PM	#45
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: And so it begins 1967 SWB out of the ashes rebuild Playing with some powder coat Attached Images __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

05-06-2020, 08:56 PM	#46
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: And so it begins 1967 SWB out of the ashes rebuild Got a Lil more powder coating done today Attached Images __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

05-11-2020, 01:24 PM	#48
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: And so it begins 1967 SWB out of the ashes rebuild Coming together! Attached Images __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car



Register or Log In To remove these advertisements.

05-11-2020, 01:41 PM	#49
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: And so it begins 1967 SWB out of the ashes rebuild Coming together! __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

05-11-2020, 09:27 PM	#50
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: And so it begins 1967 SWB out of the ashes rebuild Got bored and built a SS battery tray that mounts in the stock location Attached Images __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

Register or Log In To remove these advertisements.