OR 1972 suburban parts and cuts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bcfishon · 04-06-2020, 09:41 PM

Quote:

Originally Posted by 71blksuper4x4

How rusty is the cab mounts that connect to the b pillars?

The can mounts look good and I think I can get them out when working on other folks stuff,I really like the $ 40 dollar price.
I am willing to ship with assistance.

**ShortbedClayton** · 04-06-2020, 09:44 PM

I’ll take as much as I can between the b pillar and third door back. That looks to be nicest.. if I get most of that without messing with Randy’s cut and the best part of drivers side in front of solid side should be more than enough... like I said roughly 26” between the two should be great! thanks for the pics. Let me know a price and when you get it cut. Shipping shouldn’t be terrible. I’ve learned the smaller the box the cheaper the shipping for UPS. Probably just wrap the pieces in cardboard and have both ends shut and that would probably work..

Thanks
Clayton
Posted via Mobile Device

Heliarcn · 04-07-2020, 02:26 PM

How bout the 3 headliner bows and chrome clips? Can you send good pics and tell me how much shipped to 89149?

Thanks.

bcfishon · 04-07-2020, 07:02 PM

Quote:

Originally Posted by Heliarcn

How bout the 3 headliner bows and chrome clips? Can you send good pics and tell me how much shipped to 89149?

Thanks.

Only one bow was intact,chrome clips were still there,
$15 bucks plus shipping

**ShortbedClayton** · 04-07-2020, 07:05 PM

Did you think of a price on them cuts I asked about..
Posted via Mobile Device

bcfishon · 04-07-2020, 07:42 PM

Quote:

Originally Posted by ShortbedClayton

Did you think of a price on them cuts I asked about..
Posted via Mobile Device

How's $75 sound Clayton plus shipping which I will investigate tomorrow
I can start to dismantle saturday

**ShortbedClayton** · 04-07-2020, 07:52 PM

Quote:

Originally Posted by bcfishon

How's $75 sound Clayton plus shipping which I will investigate tomorrow
I can start to dismantle saturday

Was hoping to stay under 100 shipped.. but I can bet shipping will be more than 15$
Posted via Mobile Device

bcfishon · 04-07-2020, 09:33 PM

Quote:

Originally Posted by ShortbedClayton

Was hoping to stay under 100 shipped.. but I can bet shipping will be more than 15$
Posted via Mobile Device

Ok I'm sure we can find a way to get it done for less than that,
I'll adjust accordingly if needed
Thanks

**71blksuper4x4** · 04-07-2020, 10:40 PM

Quote:

Originally Posted by bcfishon

The can mounts look good and I think I can get them out when working on other folks stuff,I really like the $ 40 dollar price.
I am willing to ship with assistance.

Those look a heck of a lot better than what was left on mine. Can you cut 4-5 “ back towards the center of the cab past the cab bolt areas. There is a hole a couple inches past this location. Anywhere around that hole is fine.

Here is a pic of my current ones and yours look like they would save me some time recreating what I am missing.

**71blksuper4x4** · 04-07-2020, 10:42 PM

My other

**ShortbedClayton** · 04-08-2020, 02:18 AM

Quote:

Originally Posted by bcfishon

Ok I'm sure we can find a way to get it done for less than that,
I'll adjust accordingly if needed
Thanks

Thanks let me know when you get cut and ready for ship and I’ll get some money headed ur way. Thanks
Posted via Mobile Device

Heliarcn · 04-08-2020, 02:43 PM

Quote:

Originally Posted by bcfishon

Only one bow was intact,chrome clips were still there,
$15 bucks plus shipping

Looks like the bow is a little rough. Ill take the clips. Let me know how to pay.

Thanks

bcfishon · 04-08-2020, 10:10 PM

Quote:

Originally Posted by Heliarcn

Looks like the bow is a little rough. Ill take the clips. Let me know how to pay.

Thanks

Pm sent

bcfishon · 04-08-2020, 10:21 PM

Quote:

Originally Posted by ShortbedClayton

Thanks let me know when you get cut and ready for ship and I’ll get some money headed ur way. Thanks
Posted via Mobile Device

Fish are in and the rivers will be crowded this weekend so looks like a good time to do some deconstruction,Saturday at least.should be able to make progress as the weather looks great and the days are back to normal as far as daylight hours.

**Getter-Done** · 04-08-2020, 10:36 PM

I would like a Quote for 4th door (Door Panel) cutout
Where the door panel goes. Also If no one has requested / I would like
Driver side b-pillar.
I will send picture of my request. In a few
Name: 4th door_LI (2).jpg
Views: 343
Size: 42.2 KB

Name: 4th door_LI (2).jpg
Views: 343
Size: 42.2 KB

Name: 4th door_LI.jpg
Views: 342
Size: 44.5 KB

.

bcfishon · 04-09-2020, 08:22 PM

Pm sent

Quote:

Originally Posted by Getter-Done

I would like a Quote for 4th door (Door Panel) cutout
Where the door panel goes. Also If no one has requested / I would like
Driver side b-pillar.
I will send picture of my request. In a few
Attachment 2000489

Attachment 2000557

.

**Getter-Done** · 04-09-2020, 08:51 PM

Quote:

Originally Posted by bcfishon

Pm sent

Thanks

.

**ShortbedClayton** · 04-09-2020, 09:36 PM

Quote:

Originally Posted by bcfishon

Fish are in and the rivers will be crowded this weekend so looks like a good time to do some deconstruction,Saturday at least.should be able to make progress as the weather looks great and the days are back to normal as far as daylight hours.

Awesome look foreward to getting them cuts.
Posted via Mobile Device

'71surfwagon · 04-10-2020, 01:08 PM

How much for the lower body mouldings?

bcfishon · 04-11-2020, 01:35 PM

Pm sent

Quote:

Originally Posted by '71surfwagon

How much for the lower body mouldings?

**Getter-Done** · 04-16-2020, 05:27 PM

Quote:

Originally Posted by Getter-Done

I would like a Quote for 4th door (Door Panel) cutout
Where the door panel goes. Also If no one has requested / I would like
Driver side b-pillar.
I will send picture of my request. In a few
Attachment 2000489

Attachment 2000557

.

Money sent.
Thanks

.

bcfishon · 04-16-2020, 07:27 PM

Moldings are gone,thanks surfwagon and nice to meet you.

Quote:

Originally Posted by bcfishon

Pm sent

**71blksuper4x4** · 04-17-2020, 11:52 PM

Here is what I need Brian, this was the hole I mentioned previously that is a couple inches from the cab bolt hole.

'71surfwagon · 04-18-2020, 03:36 PM

Quote:

Originally Posted by bcfishon

Moldings are gone,thanks surfwagon and nice to meet you.

Thanks for the parts - good to meet you too.

**Getter-Done** · 04-23-2020, 08:04 PM

Received parts today.

Well packaged / Great Deal.

Great communication

Thanks for the smooth transaction.

Member: Perpendicular is looking for rear quarter cuts - with the reverse lights

Here's the link below vvvv

Link:http://67-72chevytrucks.com/vboard/s...d.php?t=804859

.

04-06-2020, 09:44 PM	#27
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 702	Re: 1972 suburban parts and cuts I’ll take as much as I can between the b pillar and third door back. That looks to be nicest.. if I get most of that without messing with Randy’s cut and the best part of drivers side in front of solid side should be more than enough... like I said roughly 26” between the two should be great! thanks for the pics. Let me know a price and when you get it cut. Shipping shouldn’t be terrible. I’ve learned the smaller the box the cheaper the shipping for UPS. Probably just wrap the pieces in cardboard and have both ends shut and that would probably work.. Thanks Clayton Posted via Mobile Device

04-07-2020, 02:26 PM	#28
Heliarcn Registered User Join Date: Nov 2013 Location: Las Vegas, Nevada Posts: 376	Re: 1972 suburban parts and cuts How bout the 3 headliner bows and chrome clips? Can you send good pics and tell me how much shipped to 89149? Thanks. __________________ Bret 1972 Chevy Suburban 1976 Blazer

04-07-2020, 07:05 PM	#30
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 702	Re: 1972 suburban parts and cuts Did you think of a price on them cuts I asked about.. Posted via Mobile Device

04-07-2020, 10:42 PM	#35
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: 1972 suburban parts and cuts My other Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-08-2020, 10:36 PM	#40
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,404	Re: 1972 suburban parts and cuts I would like a Quote for 4th door (Door Panel) cutout Where the door panel goes. Also If no one has requested / I would like Driver side b-pillar. I will send picture of my request. In a few . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build Last edited by Getter-Done; 04-09-2020 at 06:29 AM.

04-10-2020, 01:08 PM	#44
'71surfwagon Registered User Join Date: Jun 2017 Location: Yamhill, OR Posts: 2	Re: 1972 suburban parts and cuts How much for the lower body mouldings?

04-17-2020, 11:52 PM	#48
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: 1972 suburban parts and cuts Here is what I need Brian, this was the hole I mentioned previously that is a couple inches from the cab bolt hole. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-23-2020, 08:04 PM	#50
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,404	Re: 1972 suburban parts and cuts Received parts today. Well packaged / Great Deal. Great communication Thanks for the smooth transaction. Member: Perpendicular is looking for rear quarter cuts - with the reverse lights Here's the link below vvvv Link:http://67-72chevytrucks.com/vboard/s...d.php?t=804859 . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.