Bought this today - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71blksuper4x4** · 05-25-2020, 07:52 PM

Nice find Leon! Hope all is well up your way. Trevor

**LockDoc** · 05-25-2020, 08:14 PM

Quote:

Originally Posted by uncle

Nice catch. I like the center seat. Out of curiosity does it have a headliner? I’ve had several 69CST trucks that did not have headliners.

It does not have a headliner.

Quote:

Originally Posted by special-K

Those dark blue steering wheels are rare. That one isn't

How about the seat belts? If those are nice that's a big plus.

I'm going to pressure wash the belts and see how they come out.

Quote:

Originally Posted by Ironangel

Wow, nice score Leon! I'd be interested in the rear end and transmission if they're the Dana 60 and THM400, drive shafts and front springs as well if your parting her out.

Rear is an Eaton HO52. The original went south on him so he replaced the center section with a 4.57 or a 5.14 he couldn't remember which one for sure. No transmission.

LockDoc

**LockDoc** · 05-25-2020, 08:21 PM

Quote:

Originally Posted by Ol Blue K20

Nice buy Leon, if you get a chance could you take pics of the spotlight from inside view of the A pillar please?

Here are a few Dale. Let me know if you need any others.

LockDoc

**LockDoc** · 05-25-2020, 08:27 PM

Quote:

Originally Posted by Chevys4life

If you are going to part it out, can I be first in line for the radio knobs. Also, if it has the red hazard switch can it get that too?

This isn't a for sale thread, and you need to be a premium member to post a "Want to Buy' post. I need to see what I want to keep off of it for my projects first and anything I decide to sell will be posted in the parts for sale forum. I will make a note of what you wanted and let you know when and if I post those parts for sale.

Thanks,
LockDoc

**dagnabbitt** · 05-25-2020, 08:27 PM

Oh wow, I wish I'd have a chance to buy something like that. Are you going to build it, or too early to tell?

**LockDoc** · 05-25-2020, 08:28 PM

Quote:

Originally Posted by 71blksuper4x4

Nice find Leon! Hope all is well up your way. Trevor

Hi Trevor,

Thanks.

Everything is going good here. Staying pretty close to home most of the time....

LockDoc

Chevys4life · 05-25-2020, 08:36 PM

Quote:

Originally Posted by LockDoc

This isn't a for sale thread, and you need to be a premium member to post a "Want to Buy' post. I need to see what I want to keep off of it for my projects first and anything I decide to sell will be posted in the parts for sale forum. I will make a note of what you wanted and let you know when and if I post those parts for sale.

Thanks,
LockDoc

Thanks for the reply!!!!

**LockDoc** · 05-25-2020, 08:39 PM

-
Went and brought the truck home this afternoon. Here are a few more pictures. I am probably going to part this one out but not going to list anything until I get it completely dismantled and figure out what I want to keep. For now I know I am keeping the seats, radio, sway bar and bed sides. Not sure what else.

The drivers side seat back was tight against the gas tank so the mice decided to use the foam in that area for nesting material....

LockDoc

**70cst** · 05-25-2020, 09:25 PM

Bank Robbery

Good deal

**Ol Blue K20** · 05-25-2020, 09:29 PM

Quote:

Originally Posted by LockDoc

Here are a few Dale. Let me know if you need any others.

LockDoc

Thanks Leon, the pictures were just what I needed. If the light has the gm logo is my only other question.

**LockDoc** · 05-25-2020, 09:51 PM

Quote:

Originally Posted by Ol Blue K20

Thanks Leon, the pictures were just what I needed. If the light has the gm logo is my only other question.

I think it just says "UNITY" on it Dale. It think the bulb is a little smaller in diameter than the others I have. I will double check it tomorrow.

LockDoc

**Ol Blue K20** · 05-25-2020, 09:58 PM

Quote:

Originally Posted by LockDoc

I think it just says "UNITY" on it Dale. It think the bulb is a little smaller in diameter than the others I have. I will double check it tomorrow.

LockDoc

Thanks Leon!

**Portland68** · 05-25-2020, 10:54 PM

Quote:

Originally Posted by Ol Blue K20

Thanks Leon, the pictures were just what I needed. If the light has the gm logo is my only other question.

I’ve got a unity spotlight on my 68, there is indeed a metal tab on the top of the bulb retainer that says GM if I remember correctly.

57larry · 05-25-2020, 11:13 PM

what a great find

**Already Gone** · 05-26-2020, 01:58 PM

Quote:

Originally Posted by LockDoc

-
A guy called me yesterday and asked me if I wanted to buy a '69 parts truck. No motor or transmission and no doors but It has an extra hood. $450.00 with title. Not to far from me so I said I would come and look at it. I was pleasantly surprised.

I bought it.

LockDoc

Is the centre section between the buckets factory. I notice the spid says A58 Bucket Seats where as trucks with buckets and console say A50 as I've never seen a seat like the one in your truck. Looks like buddy buckets centre piece with the newer style buckets.

**LockDoc** · 05-26-2020, 05:05 PM

Quote:

Originally Posted by Already Gone

Is the centre section between the buckets factory. I notice the spid says A58 Bucket Seats where as trucks with buckets and console say A50 as I've never seen a seat like the one in your truck. Looks like buddy buckets centre piece with the newer style buckets.

The center seat is hand made from plywood and covered with a matching vinyl material. There is a storage area under the seat part. They did a really nice job on it.

LockDoc

**mkmc69** · 05-27-2020, 08:15 AM

Quote:

Originally Posted by LockDoc

-
Went and brought the truck home this afternoon. Here are a few more pictures. I am probably going to part this one out but not going to list anything until I get it completely dismantled and figure out what I want to keep. For now I know I am keeping the seats, radio, sway bar and bed sides. Not sure what else.

The drivers side seat back was tight against the gas tank so the mice decided to use the foam in that area for nesting material....

LockDoc

I never knew that buddy seats were offered in 69. How is it mounted? Does the center seat have its own brackets? If you are selling it, I may be interested in purchasing.

**too much stuff** · 05-27-2020, 08:29 AM

Quote:

Originally Posted by Already Gone

Is the centre section between the buckets factory. I notice the spid says A58 Bucket Seats where as trucks with buckets and console say A50 as I've never seen a seat like the one in your truck. Looks like buddy buckets centre piece with the newer style buckets.

Quote:

Originally Posted by mkmc69

I never knew that buddy seats were offered in 69. How is it mounted? Does the center seat have its own brackets? If you are selling it, I may be interested in purchasing.

These look like correct individual bucket seats for a 69 that someone added a center seat to. Maybe a console delete truck?
Lots of good parts there.

**Ironangel** · 05-27-2020, 08:32 AM

Thanks Leon, I'm still interested in the rear end, drive shaft, and front springs. The low gear is perfect as Sally's got a 4:56 under there now. I just dropped in a new big block and have an RV THM-400, just need a drive line and a full floating rear that wont twist up when I hit it with 600 pony's...Let me know how much and I'll cross that river and come help you pull them...Thanks, ~Michael~

factorystock · 05-29-2020, 05:34 PM

SPID lists LS 8 350, not the more common LS 9 350.

**jamie72** · 05-29-2020, 10:06 PM

thought it was a dealer add on center seat, i seen a guy on facebook with like 26 trucks, blazers, burbs, and has one in his blazer.

**LockDoc** · 05-29-2020, 11:04 PM

Quote:

Originally Posted by factorystock

SPID lists LS 8 350, not the more common LS 9 350.

The guy I got the truck from gave the engine to a friend of his. I don't know what the difference would be.

Quote:

Originally Posted by jamie72

thought it was a dealer add on center seat, i seen a guy on facebook with like 26 trucks, blazers, burbs, and has one in his blazer.

This one looks home built to me but they did a nice job on it.

LockDoc

factorystock · 05-30-2020, 04:34 PM

Quote:

Originally Posted by LockDoc

The guy I got the truck from gave the engine to a friend of his. I don't know what the difference would be.

The difference. But, not sure if this option was available on later years '70 - '72 etc.http://67-72chevytrucks.com/vboard/s...light=ls+8+350

**HO455** · 05-30-2020, 05:07 PM

Doc I've got to ask since no one else has. Is that driver's side rear wheel in as damaged as it looks in the photo?
It has been bugging me since you posted the photo.

**LockDoc** · 05-30-2020, 09:36 PM

Quote:

Originally Posted by factorystock

The difference. But, not sure if this option was available on later years '70 - '72 etc.http://67-72chevytrucks.com/vboard/s...light=ls+8+350

Thanks for the link.

Quote:

Originally Posted by HO455

Doc I've got to ask since no one else has. Is that driver's side rear wheel in as damaged as it looks in the photo?
It has been bugging me since you posted the photo.

I had to look twice at that picture after I posted it too. There is black paint under the white and the white is peeling off. It makes it look like there is no metal in that area...

LockDoc

05-25-2020, 07:52 PM	#26
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: Bought this today Nice find Leon! Hope all is well up your way. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

05-25-2020, 08:27 PM	#30
dagnabbitt Senior Member Join Date: Dec 2014 Location: Edmonton Alberta Posts: 1,401	Re: Bought this today Oh wow, I wish I'd have a chance to buy something like that. Are you going to build it, or too early to tell? __________________ DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10

05-25-2020, 08:39 PM	#33
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,637	Re: Bought this today - Went and brought the truck home this afternoon. Here are a few more pictures. I am probably going to part this one out but not going to list anything until I get it completely dismantled and figure out what I want to keep. For now I know I am keeping the seats, radio, sway bar and bed sides. Not sure what else. The drivers side seat back was tight against the gas tank so the mice decided to use the foam in that area for nesting material.... LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

05-25-2020, 09:25 PM	#34
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Bought this today Bank Robbery Good deal __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

05-25-2020, 11:13 PM	#39
57larry Registered User Join Date: Nov 2007 Location: Indianapolis Posts: 1,161	Re: Bought this today what a great find

05-27-2020, 08:32 AM	#44
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	Re: Bought this today Thanks Leon, I'm still interested in the rear end, drive shaft, and front springs. The low gear is perfect as Sally's got a 4:56 under there now. I just dropped in a new big block and have an RV THM-400, just need a drive line and a full floating rear that wont twist up when I hit it with 600 pony's...Let me know how much and I'll cross that river and come help you pull them...Thanks, ~Michael~ __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"

05-29-2020, 05:34 PM	#45
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,380	Re: Bought this today SPID lists LS 8 350, not the more common LS 9 350.

05-29-2020, 10:06 PM	#46
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	Re: Bought this today thought it was a dealer add on center seat, i seen a guy on facebook with like 26 trucks, blazers, burbs, and has one in his blazer. __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

05-30-2020, 05:07 PM	#49
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,274	Re: Bought this today Doc I've got to ask since no one else has. Is that driver's side rear wheel in as damaged as it looks in the photo? It has been bugging me since you posted the photo. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.