MN 72 C10 parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**sfont66** · 04-04-2023, 02:22 PM

Quote:

Originally Posted by 72 Jimmy Power

Any damage to bottle?? Thank you.

I filled the bottle completely full, no leaks. This setup is driver quality, probably not for a restored truck. The bracket could be sanded and spray painted, and the bottle has some discoloration, as one might expect being 50 years old, perhaps it can be cleaned up.
I believe these items are reproduced, if a fresh looking bottle is needed for your project, not sure of the price.
I have a few better pics.

**sfont66** · 04-04-2023, 03:24 PM

Quote:

Originally Posted by 70STOVEBOLT

I sent you a PM about the brake dust shields, I am going to pass. GLWS and TTT for you.

Ok, thanks for the reply

**stubs** · 04-04-2023, 11:58 PM

You ever get near St cloud

**sfont66** · 04-05-2023, 12:31 AM

Quote:

Originally Posted by stubs

You ever get near St cloud

Many years ago (20+) for parts for equipment. Not so much in recent years…..
I know Spicer to Pine City is a bit of a drive, just not headed that way, sorry
Wish I could help more

**stubs** · 04-05-2023, 12:15 PM

Would you take 20 bucks for the manifolds I'd have quite a drive I can pickup today

**sfont66** · 04-05-2023, 03:31 PM

Quote:

Originally Posted by stubs

Would you take 20 bucks for the manifolds I'd have quite a drive I can pickup today

I can’t go that low, I thought $35 was a good price, even had a few interested, I could do $ 30 if that helps you out

**stubs** · 04-06-2023, 03:06 AM

Would you be willing to ship

**sfont66** · 04-06-2023, 12:32 PM

Quote:

Originally Posted by stubs

Would you be willing to ship

I tried to send you a PM , but your box is full.
Shipping these would be expensive compared to the cost of the parts. A quick online estimate shows $36 to your zip. I would have to box them up and take them to the post office for a more accurate quote.

**stubs** · 04-06-2023, 04:30 PM

Use flat rate boxes I looked up and I believe they would fit both in a large box and woukd be under 25 bucka

**stubs** · 04-06-2023, 04:32 PM

I also deleted some messages

**sfont66** · 04-06-2023, 04:57 PM

Quote:

Originally Posted by stubs

I also deleted some messages

PM sent

**sfont66** · 04-07-2023, 05:48 PM

Some New Reduced Prices and some free stuff. Weather will be great this weekend here in Minnesota, so no travel issues like last weekend.

**sfont66** · 04-12-2023, 02:23 PM

ttt

**sfont66** · 04-14-2023, 08:31 PM

Brake booster/master cylinder/ prop valve for disk /drum SOLD

SBC Exhaust manifolds SOLD

**sfont66** · 04-21-2023, 08:40 PM

Ttt

**sfont66** · 04-22-2023, 12:08 PM

Driveshaft SOLD locally

**sfont66** · 05-10-2023, 10:43 PM

Ttt

**sfont66** · 05-25-2023, 04:16 PM

Bump for the weekend
Still some good stuff left, if items don’t sell, I need to put them back up in the attic above the garage, kind of a pain, but it’s in my way……

**Orefactory4x4 swb** · 05-25-2023, 05:00 PM

I’m switching my 72 k10 manual over to auto , whould that cross member work for the change.? I’ve been told I’d need to change mine out that it wouldn’t work for a automatic.

**sfont66** · 05-25-2023, 10:16 PM

Quote:

Originally Posted by Orefactory4x4 swb

I’m switching my 72 k10 manual over to auto , whould that cross member work for the change.? I’ve been told I’d need to change mine out that it wouldn’t work for a automatic.

Thanks for the interest
I believe you are getting good/correct advice.
This crossmember is from a manual transmission and mounts to the bell housing, I don’t believe it will work for your change from manual to automatic, I am not 100% certain, but I think you need a crossmember from a automatic truck. I think the crossmember on a auto picks up the weight of the transmission further back than on a manual. I don’t have any experience with a 4x4 to say certain.
Sorry I can’t be more helpful

**Orefactory4x4 swb** · 05-25-2023, 11:16 PM

Thanks. I’d be interested in the battery tray and door seals if still available though

**sfont66** · 05-26-2023, 10:34 AM

Quote:

Originally Posted by Orefactory4x4 swb

Thanks. I’d be interested in the battery tray and door seals if still available though

Yes the battery tray and door seals are still available.
PM sent.

**sfont66** · 05-27-2023, 02:33 PM

Quote:

Originally Posted by Orefactory4x4 swb

Thanks. I’d be interested in the battery tray and door seals if still available though

Pm sent

Package sent
Battery tray Sold
Door seals, speedometer cable,and exhaust hanger went to Orefactory4x4
Thanks and hope your project is going well!

**Orefactory4x4 swb** · 05-27-2023, 05:49 PM

Thanks sean
And the extra member parts, they help and are very appreciative.
My 72 k10 body work almost done, ready to switch over to frame and running gear. Can’t wait for my first drive done. I had a 67swb c10 in high school that gave me the forever itch..

**Orefactory4x4 swb** · 05-30-2023, 06:45 PM

Parts arrived today, thanks again.

04-04-2023, 11:58 PM	#28
stubs Junior Member Join Date: May 2008 Location: spicer mn Posts: 60	Re: 72 C10 parts You ever get near St cloud

04-05-2023, 12:15 PM	#30
stubs Junior Member Join Date: May 2008 Location: spicer mn Posts: 60	Re: 72 C10 parts Would you take 20 bucks for the manifolds I'd have quite a drive I can pickup today

04-06-2023, 03:06 AM	#32
stubs Junior Member Join Date: May 2008 Location: spicer mn Posts: 60	Re: 72 C10 parts Would you be willing to ship

04-06-2023, 04:30 PM	#34
stubs Junior Member Join Date: May 2008 Location: spicer mn Posts: 60	Re: 72 C10 parts Use flat rate boxes I looked up and I believe they would fit both in a large box and woukd be under 25 bucka

04-06-2023, 04:32 PM	#35
stubs Junior Member Join Date: May 2008 Location: spicer mn Posts: 60	Re: 72 C10 parts I also deleted some messages

04-07-2023, 05:48 PM	#37
sfont66 Senior Member Join Date: Nov 2015 Location: Pine City MN Posts: 363	Re: 72 C10 parts Some New Reduced Prices and some free stuff. Weather will be great this weekend here in Minnesota, so no travel issues like last weekend. __________________ 72 C10, Was a 350,M20, Brodix heads,Comp cam, Edelbrock intake&carb, Hedman hedders LWB. Project is now a 5.3(L33) w/PRC stage 2.5 CNC ported 243heads, BTR RedHot cam,Holley Terminator X, T56 magnum. SWB, Boyd tank. 4.5/4 Drop http://67-72chevytrucks.com/vboard/s...My72c10project

04-12-2023, 02:23 PM	#38
sfont66 Senior Member Join Date: Nov 2015 Location: Pine City MN Posts: 363	Re: 72 C10 parts ttt __________________ 72 C10, Was a 350,M20, Brodix heads,Comp cam, Edelbrock intake&carb, Hedman hedders LWB. Project is now a 5.3(L33) w/PRC stage 2.5 CNC ported 243heads, BTR RedHot cam,Holley Terminator X, T56 magnum. SWB, Boyd tank. 4.5/4 Drop http://67-72chevytrucks.com/vboard/s...My72c10project

04-14-2023, 08:31 PM	#39
sfont66 Senior Member Join Date: Nov 2015 Location: Pine City MN Posts: 363	Re: 72 C10 parts Brake booster/master cylinder/ prop valve for disk /drum SOLD SBC Exhaust manifolds SOLD __________________ 72 C10, Was a 350,M20, Brodix heads,Comp cam, Edelbrock intake&carb, Hedman hedders LWB. Project is now a 5.3(L33) w/PRC stage 2.5 CNC ported 243heads, BTR RedHot cam,Holley Terminator X, T56 magnum. SWB, Boyd tank. 4.5/4 Drop http://67-72chevytrucks.com/vboard/s...My72c10project

04-21-2023, 08:40 PM	#40
sfont66 Senior Member Join Date: Nov 2015 Location: Pine City MN Posts: 363	Re: 72 C10 parts Ttt __________________ 72 C10, Was a 350,M20, Brodix heads,Comp cam, Edelbrock intake&carb, Hedman hedders LWB. Project is now a 5.3(L33) w/PRC stage 2.5 CNC ported 243heads, BTR RedHot cam,Holley Terminator X, T56 magnum. SWB, Boyd tank. 4.5/4 Drop http://67-72chevytrucks.com/vboard/s...My72c10project

04-22-2023, 12:08 PM	#41
sfont66 Senior Member Join Date: Nov 2015 Location: Pine City MN Posts: 363	Re: 72 C10 parts Driveshaft SOLD locally __________________ 72 C10, Was a 350,M20, Brodix heads,Comp cam, Edelbrock intake&carb, Hedman hedders LWB. Project is now a 5.3(L33) w/PRC stage 2.5 CNC ported 243heads, BTR RedHot cam,Holley Terminator X, T56 magnum. SWB, Boyd tank. 4.5/4 Drop http://67-72chevytrucks.com/vboard/s...My72c10project

05-10-2023, 10:43 PM	#42
sfont66 Senior Member Join Date: Nov 2015 Location: Pine City MN Posts: 363	Re: 72 C10 parts Ttt __________________ 72 C10, Was a 350,M20, Brodix heads,Comp cam, Edelbrock intake&carb, Hedman hedders LWB. Project is now a 5.3(L33) w/PRC stage 2.5 CNC ported 243heads, BTR RedHot cam,Holley Terminator X, T56 magnum. SWB, Boyd tank. 4.5/4 Drop http://67-72chevytrucks.com/vboard/s...My72c10project

05-25-2023, 04:16 PM	#43
sfont66 Senior Member Join Date: Nov 2015 Location: Pine City MN Posts: 363	Re: 72 C10 parts Bump for the weekend Still some good stuff left, if items don’t sell, I need to put them back up in the attic above the garage, kind of a pain, but it’s in my way…… __________________ 72 C10, Was a 350,M20, Brodix heads,Comp cam, Edelbrock intake&carb, Hedman hedders LWB. Project is now a 5.3(L33) w/PRC stage 2.5 CNC ported 243heads, BTR RedHot cam,Holley Terminator X, T56 magnum. SWB, Boyd tank. 4.5/4 Drop http://67-72chevytrucks.com/vboard/s...My72c10project

05-25-2023, 05:00 PM	#44
Orefactory4x4 swb Active Member Join Date: Mar 2023 Location: Springfield oregon Posts: 180	Re: 72 C10 parts I’m switching my 72 k10 manual over to auto , whould that cross member work for the change.? I’ve been told I’d need to change mine out that it wouldn’t work for a automatic. Last edited by Orefactory4x4 swb; 05-25-2023 at 09:16 PM. Reason: Spelling

05-25-2023, 11:16 PM	#46
Orefactory4x4 swb Active Member Join Date: Mar 2023 Location: Springfield oregon Posts: 180	Re: 72 C10 parts Thanks. I’d be interested in the battery tray and door seals if still available though

05-27-2023, 05:49 PM	#49
Orefactory4x4 swb Active Member Join Date: Mar 2023 Location: Springfield oregon Posts: 180	Re: 72 C10 parts Thanks sean And the extra member parts, they help and are very appreciative. My 72 k10 body work almost done, ready to switch over to frame and running gear. Can’t wait for my first drive done. I had a 67swb c10 in high school that gave me the forever itch..



Register or Log In To remove these advertisements.

05-30-2023, 06:45 PM	#50
Orefactory4x4 swb Active Member Join Date: Mar 2023 Location: Springfield oregon Posts: 180	Re: 72 C10 parts Parts arrived today, thanks again.

Register or Log In To remove these advertisements.