55.2-59 56 Chevy truck TCI - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffs56 · 10-01-2023, 12:37 PM

I will check the rubber on there and try the zip tie. I have stock spindles. They said if I go with dropped spindles it would give me more adjustment but not sure

dsraven · 10-01-2023, 03:40 PM

If you have stock spindles and install drop spindles then the truck will get lower, meaning that you will need to adjust your coilovers to compensate. Doing that will make your control arms move down at the ball joint end which may affect your geometry and alignment.

jeffs56 · 10-01-2023, 07:00 PM

But I guess what they are telling me is if I do the dropped spindles the. I’ll be able to have some adjustment on my coilovers. Right now they are set at the lowest it will sit. So I only have threads to adjust to make the truck higher? I’m not sure how that would affect the ride

PowerdbyChevy79 · 12-14-2023, 06:11 AM

Quote:

Originally Posted by jeffs56

Another. I like the way it sits

Do you have anymore pics?

jeffs56 · 12-14-2023, 05:23 PM

I’m not sure if I posted these pics

dsraven · 12-14-2023, 06:00 PM

How do you get the parking lot to stand on its edge like that?
Nice.

jeffs56 · 12-15-2023, 02:15 AM

lol I’m not sure why it posted like that.

**mr48chev** · 12-15-2023, 03:13 AM

Fixed it. That's a nice start on a nifty truck.

my56chevytruck · 12-18-2023, 09:57 AM

Quote:

Originally Posted by jeffs56

I’m not sure if I posted these pics

nice stance Jeff, looks good

10-01-2023, 12:37 PM	#26
jeffs56 Registered User Join Date: May 2015 Location: Bakersfield California Posts: 301	Re: 56 Chevy truck TCI I will check the rubber on there and try the zip tie. I have stock spindles. They said if I go with dropped spindles it would give me more adjustment but not sure

10-01-2023, 03:40 PM	#27
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,322	Re: 56 Chevy truck TCI If you have stock spindles and install drop spindles then the truck will get lower, meaning that you will need to adjust your coilovers to compensate. Doing that will make your control arms move down at the ball joint end which may affect your geometry and alignment.

10-01-2023, 07:00 PM	#28
jeffs56 Registered User Join Date: May 2015 Location: Bakersfield California Posts: 301	Re: 56 Chevy truck TCI But I guess what they are telling me is if I do the dropped spindles the. I’ll be able to have some adjustment on my coilovers. Right now they are set at the lowest it will sit. So I only have threads to adjust to make the truck higher? I’m not sure how that would affect the ride

12-14-2023, 05:23 PM	#30
jeffs56 Registered User Join Date: May 2015 Location: Bakersfield California Posts: 301	Re: 56 Chevy truck TCI I’m not sure if I posted these pics Attached Images Last edited by Rickysnickers; 12-15-2023 at 10:15 AM.

12-14-2023, 06:00 PM	#31
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,322	Re: 56 Chevy truck TCI How do you get the parking lot to stand on its edge like that? Nice.

12-15-2023, 02:15 AM	#32
jeffs56 Registered User Join Date: May 2015 Location: Bakersfield California Posts: 301	Re: 56 Chevy truck TCI lol I’m not sure why it posted like that.

12-15-2023, 03:13 AM	#33
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: 56 Chevy truck TCI Fixed it. That's a nice start on a nifty truck. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.