Well, I did it again..... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Shortnwide4x4 · 03-21-2024, 10:18 AM

That looks like a great start, good score!

**1970cstblazer** · 03-21-2024, 10:47 AM

Quote:

Originally Posted by 57taskforce

That’s why mother GM blessed us with the all mighty SM-465!

Amen!

68Gold/white · 03-21-2024, 07:03 PM

We're all looking forward to more pictures, especially when it's all on Leon's property.
Doesn't look like too much is missing.....but engine looks like it might have water in it...

**JDL** · 03-21-2024, 07:42 PM

I know that truck.

**LockDoc** · 03-21-2024, 09:06 PM

Quote:

Originally Posted by Shortnwide4x4

That looks like a great start, good score!

Thanks....

Quote:

Originally Posted by 68Gold/white

We're all looking forward to more pictures, especially when it's all on Leon's property.
Doesn't look like too much is missing.....but engine looks like it might have water in it...

Looks like everything is there. I got it home late this afternoon but didn't have time to mess with it. I will know about the engine in the next few days. It is supposed to rain and snow over the weekend

Quote:

Originally Posted by JDL

I know that truck.

Yep, I looked at it back in 2019 but the guy that owned it then wanted too much for it.

http://67-72chevytrucks.com/vboard/s...d.php?t=790724

He later sold it to the guy I just bought it from.
.
.

**LockDoc** · 04-08-2024, 10:26 PM

-
I now have the engine running and it sounds pretty good. The radiator had a leak in it so I had to fix that. Don't flame me for the back country core support brace...

The under dash wire loom was a mess so I pulled it all out. Notice the two fuses with aluminum foil wrapped around them...

.. I also removed the A/C components and wiring.

The cluster had a couple of non-stock gauges in it so I disassembled it and removed them. I think I have another complete cluster I can use for it so I may just use this one for parts.
.

jjzepplin · 04-09-2024, 12:19 AM

In for this. You are reinstalling the A/C right? If not - let me know. Florida is hot!

57taskforce · 04-09-2024, 02:39 PM

Interesting that it’s an ac truck without a clutch fan. Never seen that before. Probably a Po’s shenanigans.

54blackhornet · 04-09-2024, 03:55 PM

Man you got it torn down quick ?

**LockDoc** · 04-09-2024, 06:06 PM

Quote:

Originally Posted by jjzepplin

In for this. You are reinstalling the A/C right? If not - let me know. Florida is hot!

I do have a complete Vintage air setup I could put in it but We will have to see where this is going first.

Quote:

Originally Posted by 57taskforce

Interesting that it’s an ac truck without a clutch fan. Never seen that before. Probably a Po’s shenanigans.

There are a lot of things changed on this truck so all bets are off on that....

Quote:

Originally Posted by 54blackhornet

Man you got it torn down quick ?

I just hope I can get it put back together as quick...

doowopper · 04-09-2024, 08:28 PM

I'm watching.

**LockDoc** · 04-15-2024, 10:55 AM

-
Replacement under dash wire loom and complete stock cluster are now in. Both items in good shape that I had on hand. I also dug out a pretty decent engine compartment main power/headlight loom that I am going to use. I think I can save the starter/ignition loom. I will pull it out this morning and check it out. If not I have one I can use. I also replaced the dash pad with a maroon one I had. It has a couple of small cracks on it but it is in a lot better shape than the black one that was on it. Next I am going to check out the brakes and start bolting the sheet metal pieces back on it.

Keep in mind that this is not a rebuild or restore project but a get it running and driving safely project because I am probably going to have to sell it since I just purchased my Uncles all original '69 1/2 ton pickup.

**LockDoc** · 06-02-2024, 12:29 AM

-
I really haven't been dragging my feet on this but I have had a lot of other irons in the fire the last couple of months. I am finally back on it and making pretty good progress on it. New front calipers, pads, and master cylinder are installed. The rotors cleaned up good and are in good shape. Starting to bolt the sheet metal back on it. I had to fix a pretty bad crease in the top of the drivers fender. It had been fixed before and was really thin in spots. I finally got it squared away and it looks pretty good. I hope to bolt the hood and front bumper back on it in the morning.

As I mentioned before, this is not a re-build, this is get it driveable and safe project. Someone else can do the re-build on it..... I drove it around the yard a couple of days ago and it actually runs pretty good.

**68bowtie** · 06-02-2024, 01:02 AM

Mean machine. Looking good!

**Ol Blue K20** · 06-02-2024, 09:54 AM

Looks great!

**1970cstblazer** · 06-02-2024, 10:57 AM

I really need a K20 in my life at some point. Need to finish the '70 Blazer and get the C50-C60 dump truck I've always wanted first. LOL

**jerry moss** · 06-02-2024, 12:28 PM

i wish you could send some of your energy out my way, every time i walk out to my 69 suburban i get overwhelmed and walk away. mine needs a solid weekend of work and would be drivable but i just can't bring myself to jump on it

you are making quick work on yours

54blackhornet · 06-02-2024, 02:13 PM

Man you sure get stuff done quickly ! Your knowledge of the electrical stuff is just incredible !

**LockDoc** · 06-02-2024, 11:44 PM

-

Quote:

Originally Posted by 68bowtie

Mean machine. Looking good!

Thanks!

Quote:

Originally Posted by Ol Blue K20

Looks great!

Thanks Dale.

Quote:

Originally Posted by 1970cstblazer

I really need a K20 in my life at some point. Need to finish the '70 Blazer and get the C50-C60 dump truck I've always wanted first. LOL

That should be doable in a couple of years....

Quote:

Originally Posted by jerry moss

i wish you could send some of your energy out my way, every time i walk out to my 69 suburban i get overwhelmed and walk away. mine needs a solid weekend of work and would be drivable but i just can't bring myself to jump on it

you are making quick work on yours

All you have to do is one little thing every evening. It doesn't have to be anything major, just keep pecking away at it. Before you know it it will be done.

Quote:

Originally Posted by 54blackhornet

Man you sure get stuff done quickly ! Your knowledge of the electrical stuff is just incredible !

Thanks.

Almost everything I know was learned from the members of this board. Some of it was trial and error but we won't talk about that....

I added the hood and front bumper this afternoon. On a stock height truck I can get the hood on by myself but with the 4" lift this truck has I had to call in some help. I still have some adjustments to make.

LockDoc

LT7A · 06-03-2024, 08:09 AM

Man that looks cool. If you sell it, I'd be very tempted if I was a bit local-er. Looks like some of that white over-paint might come off with a pressure washer, and maybe the rest of it with some elbow grease.

**LockDoc** · 07-01-2024, 12:06 AM

-
I sold this truck Saturday. It went to a local guy I know and he builds some nice stuff.

**BIG ORANGE** · 07-04-2024, 06:52 PM

Super impressive I love it, I showed my wife, she couldn't believe it.......
Great score brother,

**Ol Blue K20** · 07-04-2024, 10:08 PM

Quote:

Originally Posted by LockDoc

-
I sold this truck Saturday. It went to a local guy I know and he builds some nice stuff.

Congratulations Leon, I think you saved another one!!

**LockDoc** · 07-04-2024, 10:54 PM

Quote:

Originally Posted by BIG ORANGE

Super impressive I love it, I showed my wife, she couldn't believe it.......
Great score brother,

Thanks Donnie.

Quote:

Originally Posted by Ol Blue K20

Congratulations Leon, I think you saved another one!!

Yep, pretty sure I did. That's a win in my book....
.

**MJN** · 09-25-2024, 01:24 PM

Just spotted it listed again on FB Marketplace, looks just like it did when you sold it.

https://www.facebook.com/marketplace...f-62e2c2a101fc

03-21-2024, 10:18 AM	#26
Shortnwide4x4 Registered User Join Date: Feb 2012 Location: Canada Posts: 55	Re: Well, I did it again..... That looks like a great start, good score!

03-21-2024, 07:03 PM	#28
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,405	Re: Well, I did it again..... We're all looking forward to more pictures, especially when it's all on Leon's property. Doesn't look like too much is missing.....but engine looks like it might have water in it...

03-21-2024, 07:42 PM	#29
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,847	Re: Well, I did it again..... I know that truck. __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

04-08-2024, 10:26 PM	#31
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,769	Re: Well, I did it again..... - I now have the engine running and it sounds pretty good. The radiator had a leak in it so I had to fix that. Don't flame me for the back country core support brace... The under dash wire loom was a mess so I pulled it all out. Notice the two fuses with aluminum foil wrapped around them... .. I also removed the A/C components and wiring. The cluster had a couple of non-stock gauges in it so I disassembled it and removed them. I think I have another complete cluster I can use for it so I may just use this one for parts. . Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

04-09-2024, 12:19 AM	#32
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Well, I did it again..... In for this. You are reinstalling the A/C right? If not - let me know. Florida is hot! __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

04-09-2024, 02:39 PM	#33
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,485	Re: Well, I did it again..... Interesting that it’s an ac truck without a clutch fan. Never seen that before. Probably a Po’s shenanigans. __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

04-09-2024, 03:55 PM	#34
54blackhornet Registered User Join Date: Jul 2008 Location: Eastern Oregon Posts: 2,391	Re: Well, I did it again..... Man you got it torn down quick ? __________________ 71 C-20 07 Magnum RT AWD

04-09-2024, 08:28 PM	#36
doowopper Registered User Join Date: Nov 2020 Location: socal Posts: 62	Re: Well, I did it again..... I'm watching.

04-15-2024, 10:55 AM	#37
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,769	Re: Well, I did it again..... - Replacement under dash wire loom and complete stock cluster are now in. Both items in good shape that I had on hand. I also dug out a pretty decent engine compartment main power/headlight loom that I am going to use. I think I can save the starter/ignition loom. I will pull it out this morning and check it out. If not I have one I can use. I also replaced the dash pad with a maroon one I had. It has a couple of small cracks on it but it is in a lot better shape than the black one that was on it. Next I am going to check out the brakes and start bolting the sheet metal pieces back on it. Keep in mind that this is not a rebuild or restore project but a get it running and driving safely project because I am probably going to have to sell it since I just purchased my Uncles all original '69 1/2 ton pickup. Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 04-15-2024 at 11:05 AM.

06-02-2024, 12:29 AM	#38
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,769	Re: Well, I did it again..... - I really haven't been dragging my feet on this but I have had a lot of other irons in the fire the last couple of months. I am finally back on it and making pretty good progress on it. New front calipers, pads, and master cylinder are installed. The rotors cleaned up good and are in good shape. Starting to bolt the sheet metal back on it. I had to fix a pretty bad crease in the top of the drivers fender. It had been fixed before and was really thin in spots. I finally got it squared away and it looks pretty good. I hope to bolt the hood and front bumper back on it in the morning. As I mentioned before, this is not a re-build, this is get it driveable and safe project. Someone else can do the re-build on it..... I drove it around the yard a couple of days ago and it actually runs pretty good. Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

06-02-2024, 01:02 AM	#39
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,795	Re: Well, I did it again..... Mean machine. Looking good! __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

06-02-2024, 09:54 AM	#40
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Well, I did it again..... Looks great! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

06-02-2024, 10:57 AM	#41
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,822	Re: Well, I did it again..... I really need a K20 in my life at some point. Need to finish the '70 Blazer and get the C50-C60 dump truck I've always wanted first. LOL __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

06-02-2024, 12:28 PM	#42
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,935	Re: Well, I did it again..... i wish you could send some of your energy out my way, every time i walk out to my 69 suburban i get overwhelmed and walk away. mine needs a solid weekend of work and would be drivable but i just can't bring myself to jump on it you are making quick work on yours __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

06-02-2024, 02:13 PM	#43
54blackhornet Registered User Join Date: Jul 2008 Location: Eastern Oregon Posts: 2,391	Re: Well, I did it again..... Man you sure get stuff done quickly ! Your knowledge of the electrical stuff is just incredible ! __________________ 71 C-20 07 Magnum RT AWD



Register or Log In To remove these advertisements.

06-03-2024, 08:09 AM	#45
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,619	Re: Well, I did it again..... Man that looks cool. If you sell it, I'd be very tempted if I was a bit local-er. Looks like some of that white over-paint might come off with a pressure washer, and maybe the rest of it with some elbow grease.

07-01-2024, 12:06 AM	#46
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,769	Re: Well, I did it again..... - I sold this truck Saturday. It went to a local guy I know and he builds some nice stuff. Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 07-01-2024 at 02:20 PM.

07-04-2024, 06:52 PM	#47
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Re: Well, I did it again..... Super impressive I love it, I showed my wife, she couldn't believe it....... Great score brother, __________________ Things happen for a reason!

09-25-2024, 01:24 PM	#50
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	Re: Well, I did it again..... Just spotted it listed again on FB Marketplace, looks just like it did when you sold it. https://www.facebook.com/marketplace...f-62e2c2a101fc __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com Last edited by MJN; 09-25-2024 at 02:23 PM.

Register or Log In To remove these advertisements.