Frankentruck - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roll_the_dice · 05-30-2020, 09:44 PM

I am jealous of the sill plates...great score again! Also looking forward to seeing the welding table.

**cwcarpenter98** · 05-30-2020, 10:24 PM

Quote:

Originally Posted by roll_the_dice

I am jealous of the sill plates...great score again! Also looking forward to seeing the welding table.

Thanks Andy! I need to stop spending money and start actually repairing the truck

I hope it's going to work well. We shall see once I actually get it built

**cwcarpenter98** · 05-31-2020, 10:16 PM

Dad and I built the welding/work table today. It is 95% complete, but it is missing one key piece.

So far, we only had to buy the 4x4s for the legs, the locking casters, and a couple lag bolts. Everything else was sourced from various past projects that my dad had or had not completed. We built it to be around 36" high. Perfect height to stand at, and if I get a taller shop chair, I would easily be able to sit at it.

I know, most people would have built a welding table completely out of metal, but for the current type of welding that I am doing (patch panels on the truck) I decided to cut some costs by building the frame out of wood and putting a sheet of metal on top. I should be able to get the sheet metal tomorrow.

Oh yeah, we got it nice and level too

flashed · 05-31-2020, 11:15 PM

Looks good . get good at that welding , I need a rack welded on my 4 wheeler

**cwcarpenter98** · 05-31-2020, 11:46 PM

Quote:

Originally Posted by flashed

Looks good . get good at that welding , I need a rack welded on my 4 wheeler

Once I get the metal top for it, I should be able to learn pretty quickly. We can definitely build something for it!

**cwcarpenter98** · 06-05-2020, 09:19 PM

Since the last update, I got the metal for the top of the table. I glued it down and let it sit with a decent amount of weight on it until today.

Today, my friend came over to teach me how to weld. He took a couple welding classes at his college, so he was able to get me on the right track to start.

Going to be lots of practice in the near future

flashed · 06-05-2020, 09:49 PM

Looking good

roll_the_dice · 06-05-2020, 10:17 PM

Good job Christian...You are going to inspire me to get my rig going!

**cwcarpenter98** · 06-06-2020, 12:19 AM

Quote:

Originally Posted by flashed

Looking good

Quote:

Originally Posted by roll_the_dice

Good job Christian...You are going to inspire me to get my rig going!

Thanks y'all! Sometimes you just gotta go for it even if you mess up the first couple of times

**pdxhall** · 06-06-2020, 12:43 PM

Great job on your welding. It brings back memories of when I learned to weld just to work on my truck. I've since done a lot of patching.

**cwcarpenter98** · 06-06-2020, 08:16 PM

Quote:

Originally Posted by pdxhall

Great job on your welding. It brings back memories of when I learned to weld just to work on my truck. I've since done a lot of patching.

Thanks! Hopefully I get to the point where my patches are as good as yours!

**cwcarpenter98** · 06-12-2020, 09:50 PM

Well, I've been fighting the Dakota (and my own stupidity) since I replaced the thermostat bypass hose back at the beginning of the month. I ended up missing a crucial ground wire that made everything screwy. Once that ground wire got hooked up, the truck started right up :umk: Good learning experience

Also, I got a coat hook from a 67-72 for Frankentruck. No more hanging my suit off the seat belt buckle!

**The Rocknrod** · 06-14-2020, 07:07 AM

Wow you have a lot of good work going on here, looking forward to more.

**cwcarpenter98** · 06-14-2020, 12:44 PM

Quote:

Originally Posted by The Rocknrod

Wow you have a lot of good work going on here, looking forward to more.

Thanks! I just got some good tips on doing some sheet metal welding and I have a panel I can practice on now, so more progress is coming soon. It looks like it's going to be a really nice day for welding

**cwcarpenter98** · 06-16-2020, 09:16 PM

Did you really work on your c10 if you didn't get cut in a couple places?

SkinnyG · 06-16-2020, 11:27 PM

You never really own a project until you've bled on it.

**cwcarpenter98** · 06-17-2020, 11:37 AM

Quote:

Originally Posted by SkinnyG

You never really own a project until you've bled on it.

Very true! It's happened before, and it will happen again

**cwcarpenter98** · 06-17-2020, 09:43 PM

The passenger side floor is definitely worse than the driver's side, but I don't think I need to buy a whole floor pan to fix the rust. I should be able to get the rest of the patch panels that I need on Friday. Going to start cutting on it soon

flashed · 06-17-2020, 10:42 PM

I see a trip to Gainesville in your future .

**cwcarpenter98** · 06-17-2020, 11:23 PM

Quote:

Originally Posted by flashed

I see a trip to Gainesville in your future .

Yup! I'm planning on going Friday

**cwcarpenter98** · 06-19-2020, 09:01 PM

One nice thing about living in Georgia is that Auto Metal Direct is a little over an hour's drive from my house. Saved on shipping and got to have a nice drive in the Dakota. I got the last couple of patch panels I needed for the cab.

After I got home, I decided to just go for it and start cutting on the truck. I figured the best place to start was the inner fender, so that's what I did!

For my first patch panel, I'm happy with it. Still need to do some grinding on it and fix the rear part. I mocked up the fender as well and the two holes from the patch piece fit great with the fender.

More progress coming soon!

**cwcarpenter98** · 06-20-2020, 09:24 PM

Another day, another patch! Also got the toasted core support off. I think I'm going to pull the inner fenders and clean them up some more

**cwcarpenter98** · 06-21-2020, 06:43 PM

Went ahead and pulled the hood and inner fenders off so I could finish fixing all the rust on the passenger side inner fender. Of course, I ran out of wire right as the summer, afternoon rain shower rolled in. Had to stop for the day, but at least I made some good progress. I'll be going to get more wire tomorrow so I can finish the inner fender and get the front end back together

**pdxhall** · 06-22-2020, 12:48 PM

Nice patch work. you're really getting in to it now.

jhrusk · 06-22-2020, 02:57 PM

Looking good Christian👍👍

05-30-2020, 09:44 PM	#476
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: Frankentruck I am jealous of the sill plates...great score again! Also looking forward to seeing the welding table. __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

05-31-2020, 10:16 PM	#478
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,484	Re: Frankentruck Dad and I built the welding/work table today. It is 95% complete, but it is missing one key piece. So far, we only had to buy the 4x4s for the legs, the locking casters, and a couple lag bolts. Everything else was sourced from various past projects that my dad had or had not completed. We built it to be around 36" high. Perfect height to stand at, and if I get a taller shop chair, I would easily be able to sit at it. I know, most people would have built a welding table completely out of metal, but for the current type of welding that I am doing (patch panels on the truck) I decided to cut some costs by building the frame out of wood and putting a sheet of metal on top. I should be able to get the sheet metal tomorrow. Oh yeah, we got it nice and level too Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

05-31-2020, 11:15 PM	#479
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Frankentruck Looks good . get good at that welding , I need a rack welded on my 4 wheeler

06-05-2020, 09:19 PM	#481
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,484	Re: Frankentruck Since the last update, I got the metal for the top of the table. I glued it down and let it sit with a decent amount of weight on it until today. Today, my friend came over to teach me how to weld. He took a couple welding classes at his college, so he was able to get me on the right track to start. Going to be lots of practice in the near future Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

06-05-2020, 09:49 PM	#482
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Frankentruck Looking good

06-05-2020, 10:17 PM	#483
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: Frankentruck Good job Christian...You are going to inspire me to get my rig going! __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

06-06-2020, 12:43 PM	#485
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,082	Re: Frankentruck Great job on your welding. It brings back memories of when I learned to weld just to work on my truck. I've since done a lot of patching. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

06-12-2020, 09:50 PM	#487
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,484	Re: Frankentruck Well, I've been fighting the Dakota (and my own stupidity) since I replaced the thermostat bypass hose back at the beginning of the month. I ended up missing a crucial ground wire that made everything screwy. Once that ground wire got hooked up, the truck started right up :umk: Good learning experience Also, I got a coat hook from a 67-72 for Frankentruck. No more hanging my suit off the seat belt buckle! Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

06-14-2020, 07:07 AM	#488
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Frankentruck Wow you have a lot of good work going on here, looking forward to more. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-16-2020, 09:16 PM	#490
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,484	Re: Frankentruck Did you really work on your c10 if you didn't get cut in a couple places? Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

06-16-2020, 11:27 PM	#491
SkinnyG Registered User Join Date: Feb 2012 Location: Beautiful BC, Canada, eh?! Posts: 2,252	Re: Frankentruck You never really own a project until you've bled on it. __________________ 1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, boosted-LS 1977 Silverado: Shortboxed & dropped, potato-potato V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag Lotus Super 7 Replica: Scratch-built street-legal rollerskate

06-17-2020, 09:43 PM	#493
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,484	Re: Frankentruck The passenger side floor is definitely worse than the driver's side, but I don't think I need to buy a whole floor pan to fix the rust. I should be able to get the rest of the patch panels that I need on Friday. Going to start cutting on it soon Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

06-17-2020, 10:42 PM	#494
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Frankentruck I see a trip to Gainesville in your future .

06-19-2020, 09:01 PM	#496
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,484	Re: Frankentruck One nice thing about living in Georgia is that Auto Metal Direct is a little over an hour's drive from my house. Saved on shipping and got to have a nice drive in the Dakota. I got the last couple of patch panels I needed for the cab. After I got home, I decided to just go for it and start cutting on the truck. I figured the best place to start was the inner fender, so that's what I did! For my first patch panel, I'm happy with it. Still need to do some grinding on it and fix the rear part. I mocked up the fender as well and the two holes from the patch piece fit great with the fender. More progress coming soon! Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

06-20-2020, 09:24 PM	#497
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,484	Re: Frankentruck Another day, another patch! Also got the toasted core support off. I think I'm going to pull the inner fenders and clean them up some more Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson



Register or Log In To remove these advertisements.

06-21-2020, 06:43 PM	#498
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,484	Re: Frankentruck Went ahead and pulled the hood and inner fenders off so I could finish fixing all the rust on the passenger side inner fender. Of course, I ran out of wire right as the summer, afternoon rain shower rolled in. Had to stop for the day, but at least I made some good progress. I'll be going to get more wire tomorrow so I can finish the inner fender and get the front end back together Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

06-22-2020, 12:48 PM	#499
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,082	Re: Frankentruck Nice patch work. you're really getting in to it now. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

06-22-2020, 02:57 PM	#500
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 553	Re: Frankentruck Looking good Christian👍👍 __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

Register or Log In To remove these advertisements.