Maggie's Custom - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ls1wagon · 10-25-2013, 12:28 AM

I'm posting from my phone so I can only post one at a time. But I would say you probably could not have broke down at a better place! 😀

jdoisher · 10-25-2013, 08:26 AM

As you can see I cheated. Took the truck over to Johns house to pull the motor, Its like doing it at the doctors office as you can see in the above photo. He made me mop the floor "before we got started"
Name: 66 DELUX II 104.jpg
Views: 2230
Size: 73.1 KB

Name: 66 DELUX II 104.jpg
Views: 2230
Size: 73.1 KB

Name: 66 DELUX II 105.jpg
Views: 2235
Size: 51.7 KB

Name: 66 DELUX II 106.jpg
Views: 2310
Size: 57.6 KB

Jason

jdoisher · 10-25-2013, 09:17 AM

Just a FYI, incase you didn't know. That pic of the engine in black.....that's a 305 balancer on there.[/QUOTE]

The motor in her truck was a 305 (small balancer) and the "new" motor is a 350 with 305 416 hp heads. I assume he used the 305 balancer because he had it. But a very good eye!!!
Thanks
Jason

I haven't gotten around to using your power steering bracket but as soon as I get the truck sorted out its getting put on!!
Thanks
Jason

SCOTI · 10-25-2013, 10:23 AM

Quote:

Originally Posted by jdoisher

As you can see I cheated. Took the truck over to Johns house to pull the motor, Its like doing it at the doctors office as you can see in the above photo. He made me mop the floor "before we got started"
Attachment 1166737
Jason

I spy a g-body.....

ls1wagon · 10-25-2013, 10:30 AM

Quote:

Originally Posted by scoti

i spy a g-body.....

👍👀

jdoisher · 10-25-2013, 10:36 AM

There is a small group of us building street cars to do a little "no prep" racing, thats John car. Heres mine. I decided not to put a change in my Nova. All of my stuff is going in this car. Its another reason I haven't worked on her truck. The cage is in, motor and trans are built, so as soon as her truck is done, back on the wagon!!
Name: WAGON 001.jpg
Views: 2243
Size: 54.2 KB

Name: WAGON 001.jpg
Views: 2243
Size: 54.2 KB

Name: WAGON 007.jpg
Views: 2222
Size: 33.8 KB

Name: WAGON 008.jpg
Views: 2207
Size: 50.6 KB

Name: WAGON 010.jpg
Views: 2221
Size: 49.1 KB

Name: WAGON 009.jpg
Views: 2214
Size: 45.7 KB

Jason

C@rnut001 · 10-26-2013, 12:40 AM

I have to say I love Maggie's truck and you all have done a great job with it. Keep up the great work and good luck on your new engine. Thanks for all of the updates and pictures you have shared with us.

jdoisher · 10-28-2013, 11:26 AM

Small block shuffle!
Name: 66 DELUX II 107.jpg
Views: 2135
Size: 70.2 KB

This is what happens when you go to Johns house to work on something, you get to watch.
Name: 66 DELUX II 108.jpg
Views: 2124
Size: 63.0 KB

Name: 66 DELUX II 109.jpg
Views: 2130
Size: 58.7 KB

Name: 66 DELUX II 110.jpg
Views: 2138
Size: 64.0 KB

This is what we did most of the weekend with the kids, hence the truck not running yet. We did mange to the the new motor back in!
Name: 66 DELUX II 111.jpg
Views: 2129
Size: 61.5 KB

Name: 66 DELUX II 111.jpg
Views: 2129
Size: 61.5 KB

I'm off to Phoeinx to pick up a sign, I'll get back on the truck as soon as I can!!
Maggie, Jason, and John

Jonboy · 10-28-2013, 11:28 AM

Maybe I need to drag my junk over to John's to do an engine swap. Looks like that would be a way to see some progress, anyhow.

SCOTI · 10-28-2013, 11:47 AM

Quote:

Originally Posted by jdoisher

This is what happens when you go to Johns house to work on something, you get to watch.

John sounds like the right guy to know!

kpc01 · 10-28-2013, 11:50 AM

Quote:

Originally Posted by SCOTI

John sounds like the right guy to know!

Makes my nasty little shop look like a junkyard! I need to come check it out again soon !

ls1wagon · 10-28-2013, 12:35 PM

Quote:

Originally Posted by Jonboy

Maybe I need to drag my junk over to John's to do an engine swap. Looks like that would be a way to see some progress, anyhow.

Don't let the pics fool ya I believe putting those spark plugs in, is the only thing I did!

gonewheelin · 10-31-2013, 09:10 AM

Im finally registered! Newb here and I love this thread! Beautiful project. Youre very lucky to have a woman who is so interested in the build. Keep it up.

1964Chevy · 10-31-2013, 09:16 AM

Welcome Gonewheelin. There is an overabundance of info on this site. Good hunting.

jdoisher · 11-02-2013, 02:01 PM

Ok, motor is in, runs good!! Still need to do some tuning, but its now a tire fryer!! We worked on the truck pretty late last night and went put a few miles on it!!
Name: 66 DELUX II 116.jpg
Views: 1970
Size: 70.4 KB

Name: 66 DELUX II 116.jpg
Views: 1970
Size: 70.4 KB

Hood struts installed!!
Name: 66 DELUX II 112.jpg
Views: 1974
Size: 64.1 KB

Fixing the door hindges, and stops!!
Name: 66 DELUX II 113.jpg
Views: 1964
Size: 62.7 KB

Name: 66 DELUX II 114.jpg
Views: 1961
Size: 66.9 KB

Name: 66 DELUX II 115.jpg
Views: 1975
Size: 58.2 KB

We plan on getting a lot done this week before the show!
I had to come in to work today to meet Rick Hendrick, our owners new buiness partner, than back to Johns to get back to work on the truck!!! (notice who's doing all the work?)

jdoisher · 11-02-2013, 02:10 PM

We also had time to fit in some trick or treating!!
Name: 66 DELUX II 120.jpg
Views: 1956
Size: 38.9 KB

My little bunny!!
Name: 66 DELUX II 117.jpg
Views: 1956
Size: 31.5 KB

And my Barbie!!
Name: 66 DELUX II 119.jpg
Views: 1964
Size: 50.1 KB

Name: 66 DELUX II 118.jpg
Views: 1960
Size: 50.3 KB

Jason, Maggie, and Cathleen!!

Jeff La · 11-02-2013, 10:59 PM

Maggie's gonna be rolling now LOL

jwalk · 11-02-2013, 11:10 PM

Truck is looking good! I'll have to check it out at pistons and paint.

1964Chevy · 11-03-2013, 09:59 AM

Jason and Maggie. I bought sail sail custom cab trim on ebay, and let's just say the seller did not clearly identify the amount of overspray on them. I've tried chemicals but cannot get the spray off. In a previous post Maggie was working on hers. What did you do? I don't have a problem taping and painting, but did you sand blast or sand them clean?
See you Saturday at Pistons n Paint.
Jerry

jdoisher · 11-03-2013, 12:02 PM

Quote:

Originally Posted by 1964Chevy

Jason and Maggie. I bought sail sail custom cab trim on ebay, and let's just say the seller did not clearly identify the amount of overspray on them. I've tried chemicals but cannot get the spray off. In a previous post Maggie was working on hers. What did you do? I don't have a problem taping and painting, but did you sand blast or sand them clean?
See you Saturday at Pistons n Paint.
Jerry

I had hers rechromed, painted them with lacquer paint, than whipped off the excess with lacquer remover.

1964Chevy · 11-03-2013, 12:16 PM

Quote:

Originally Posted by jdoisher

I had hers rechromed, painted them with lacquer paint, than whipped off the excess with lacquer remover.

Re Chromed. Where?

kpc01 · 11-03-2013, 04:43 PM

Quote:

Originally Posted by 1964Chevy

Re Chromed. Where?

Somewhere earlier in the thread he said he used Pulidos plating. they are in the Mesquite area if I remember right. I had my wifes R1 wheels done there and they turned out awesome. he is supposed to be one of the better and affordable guys in DFW.

We got a decent sized little crew here in the Denton area!

1964Chevy · 11-03-2013, 05:00 PM

Quote:

Originally Posted by kpc01

Somewhere earlier in the thread he said he used Pulidos plating. they are in the Mesquite area if I remember right. I had my wifes R1 wheels done there and they turned out awesome. he is supposed to be one of the better and affordable guys in DFW.

We got a decent sized little crew here in the Denton area!

Thanks. Yes we do. Pistons n paint will be fun. I'm trying to remember all the pickups on this site that will hopefully be there.
Keep an eye out for mine. Red with black wheels, it'll be the truck laying on the grass.

chad64chevy · 11-03-2013, 05:27 PM

where did you mount the hood struts at? and do you have any measurements??

jdoisher · 11-04-2013, 11:17 AM

Quote:

Originally Posted by chad64chevy

where did you mount the hood struts at? and do you have any measurements??

I'll get beter pics and measurments for you ASAP. I used Jetta hood struts and ball screws, I work at a vw dealer!!

Hope you guys are ready for some pics!!

10-25-2013, 12:28 AM	#476
ls1wagon Registered User Join Date: May 2008 Location: lewisville ,Tx Posts: 17	Re: Maggie's Custom I'm posting from my phone so I can only post one at a time. But I would say you probably could not have broke down at a better place! 😀 Attached Images Last edited by ls1wagon; 10-25-2013 at 12:36 AM.

10-25-2013, 08:26 AM	#477
jdoisher Registered User Join Date: Jun 2012 Location: Denton Texas Posts: 407	Re: Maggie's Custom As you can see I cheated. Took the truck over to Johns house to pull the motor, Its like doing it at the doctors office as you can see in the above photo. He made me mop the floor "before we got started" Jason __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=531177 Maggie's truck!

10-25-2013, 09:17 AM	#478
jdoisher Registered User Join Date: Jun 2012 Location: Denton Texas Posts: 407	Re: Maggie's Custom Just a FYI, incase you didn't know. That pic of the engine in black.....that's a 305 balancer on there.[/QUOTE] The motor in her truck was a 305 (small balancer) and the "new" motor is a 350 with 305 416 hp heads. I assume he used the 305 balancer because he had it. But a very good eye!!! Thanks Jason I haven't gotten around to using your power steering bracket but as soon as I get the truck sorted out its getting put on!! Thanks Jason __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=531177 Maggie's truck!

10-25-2013, 10:36 AM	#481
jdoisher Registered User Join Date: Jun 2012 Location: Denton Texas Posts: 407	Re: Maggie's Custom There is a small group of us building street cars to do a little "no prep" racing, thats John car. Heres mine. I decided not to put a change in my Nova. All of my stuff is going in this car. Its another reason I haven't worked on her truck. The cage is in, motor and trans are built, so as soon as her truck is done, back on the wagon!! Jason __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=531177 Maggie's truck!

10-26-2013, 12:40 AM	#482
C@rnut001 Registered User Join Date: Dec 2011 Location: Alaska Posts: 405	Re: Maggie's Custom I have to say I love Maggie's truck and you all have done a great job with it. Keep up the great work and good luck on your new engine. Thanks for all of the updates and pictures you have shared with us. __________________ C@rnut001 (Owen) Alaskan Members Check In http://67-72chevytrucks.com/vboard/s...22#post5094422 http://67-72chevytrucks.com/vboard/s...18#post6778618

10-28-2013, 11:26 AM	#483
jdoisher Registered User Join Date: Jun 2012 Location: Denton Texas Posts: 407	Re: Maggie's Custom Small block shuffle! This is what happens when you go to Johns house to work on something, you get to watch. This is what we did most of the weekend with the kids, hence the truck not running yet. We did mange to the the new motor back in! I'm off to Phoeinx to pick up a sign, I'll get back on the truck as soon as I can!! Maggie, Jason, and John __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=531177 Maggie's truck!

10-28-2013, 11:28 AM	#484
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Maggie's Custom Maybe I need to drag my junk over to John's to do an engine swap. Looks like that would be a way to see some progress, anyhow. __________________ 1974 Jimmy- 5.3/4L80e/NP241

10-31-2013, 09:10 AM	#488
gonewheelin Registered User Join Date: Oct 2013 Location: Oakdale, CT Posts: 5	Re: Maggie's Custom Im finally registered! Newb here and I love this thread! Beautiful project. Youre very lucky to have a woman who is so interested in the build. Keep it up.

10-31-2013, 09:16 AM	#489
1964Chevy Registered User Join Date: Jan 2012 Location: Denton, Texas Posts: 92	Re: Maggie's Custom Welcome Gonewheelin. There is an overabundance of info on this site. Good hunting. __________________ If your strength is small, don't carry heavy burdens. If your words are worthless, don't give advice. Chinese Proverb

11-02-2013, 02:01 PM	#490
jdoisher Registered User Join Date: Jun 2012 Location: Denton Texas Posts: 407	Re: Maggie's Custom Ok, motor is in, runs good!! Still need to do some tuning, but its now a tire fryer!! We worked on the truck pretty late last night and went put a few miles on it!! Hood struts installed!! Fixing the door hindges, and stops!! We plan on getting a lot done this week before the show! I had to come in to work today to meet Rick Hendrick, our owners new buiness partner, than back to Johns to get back to work on the truck!!! (notice who's doing all the work?) __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=531177 Maggie's truck!

11-02-2013, 02:10 PM	#491
jdoisher Registered User Join Date: Jun 2012 Location: Denton Texas Posts: 407	Re: Maggie's Custom We also had time to fit in some trick or treating!! My little bunny!! And my Barbie!! Jason, Maggie, and Cathleen!! __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=531177 Maggie's truck!

11-02-2013, 10:59 PM	#492
Jeff La Registered User Join Date: Dec 2011 Location: Donaldsonville, La. Posts: 1,024	Re: Maggie's Custom Maggie's gonna be rolling now LOL

11-02-2013, 11:10 PM	#493
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: Maggie's Custom Truck is looking good! I'll have to check it out at pistons and paint. __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

11-03-2013, 09:59 AM	#494
1964Chevy Registered User Join Date: Jan 2012 Location: Denton, Texas Posts: 92	Re: Maggie's Custom Jason and Maggie. I bought sail sail custom cab trim on ebay, and let's just say the seller did not clearly identify the amount of overspray on them. I've tried chemicals but cannot get the spray off. In a previous post Maggie was working on hers. What did you do? I don't have a problem taping and painting, but did you sand blast or sand them clean? See you Saturday at Pistons n Paint. Jerry __________________ If your strength is small, don't carry heavy burdens. If your words are worthless, don't give advice. Chinese Proverb

11-03-2013, 05:27 PM	#499
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: Maggie's Custom where did you mount the hood struts at? and do you have any measurements?? __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.