Hazel the older Sister.... - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevy1series · 11-24-2010, 08:39 PM

i have angle back exhaust manifolds if you get yours runnin before mine tell me how it sounds with them

mcbassin · 11-25-2010, 01:50 AM

Awesome work and attention to details as always! That shop looks just like the one I want......... in my dreams.

n2billet · 11-26-2010, 10:13 PM

I got a little work done this week since the boss man gave me an extra day or two off. I finished up the air box thingy I made and got it painted. I finally ran the heater hoses through the cut down heater box (I should have shaved the firewall and been done with it) so I painted it while I was squirting flat black. Nathan sent me his new hinges so I got those painted and installed. I spent the last two days painting so now I can bolt some stuff back on. I still need to undercoat the lower firewall but this is the first time the fenders and the inner fenders have been on the truck in a long time and they are not coming off. I stood and looked at the inner fenders for about an hour and realized I really don't like them and I should have not been so lazy and made a nicer set but it's just a patina driver and it will have to do....board member elz (Jarod) hooked me up with a better set of script covers so I body worked and got those in primer after the big meal yesterday......I should have those painted next week, thanks again Jarod!

67chevy1series · 11-26-2010, 10:16 PM

ooooooooooooo that looks nice i cant wit to see it finished can you take some pics of how she sits now is she all on the frame or is she still all dismembered

n2billet · 11-26-2010, 10:24 PM

Quote:

Originally Posted by 67chevy1series

ooooooooooooo that looks nice i cant wit to see it finished can you take some pics of how she sits now is she all on the frame or is she still all dismembered

I took the bed off today as well................getting ready to install the PorterBuilt rear kit.....so it's down to the frame rails behind the cab....pictures in a few weeks sitting on the ground!

jasonhall · 11-26-2010, 10:59 PM

I cant wait.... This thing looks great!

travlinman · 11-26-2010, 11:31 PM

i may have missed it but what are u going to use for a wiper motor? and were did u get that block off box/plate for the heater?

STOCKISH · 11-26-2010, 11:42 PM

Looking good man, really good!

SCOTI · 11-27-2010, 12:39 AM

Quote:

Originally Posted by travlinman

i may have missed it but what are u going to use for a wiper motor? and were did u get that block off box/plate for the heater?

It's a sectioned & capped OE heater box.

67chevy1series · 11-27-2010, 12:43 AM

im pretty sure they fiberglassed right over the holes and stuff

travlinman · 11-27-2010, 01:07 AM

Quote:

Originally Posted by SCOTI

It's a sectioned & capped OE heater box.

ok so wheres the wiper motor? or are u not going to use/run one?

**lolife99** · 11-27-2010, 01:10 AM

Quote:

Originally Posted by travlinman

ok so wheres the wiper motor? or are u not going to use/run one?

The wiper motor is under the dash where GM put them from the factory.
Posted via Mobile Device

n2billet · 11-27-2010, 01:22 AM

Quote:

Originally Posted by travlinman

ok so wheres the wiper motor? or are u not going to use/run one?

Quote:

Originally Posted by lolife99

The wiper motor is under the dash where GM put them from the factory.
Posted via Mobile Device

I'm using the stock wiper motor like lolife99 said in the factory location......I made the filler panel for the heater box then fiberglass it all together (never again)

mcbassin · 11-27-2010, 10:59 PM

super progress! I like the heater box mod. its subtle and looks smooth!

tcb-1 · 11-27-2010, 11:37 PM

Keither, I'm dropping my 4 year old off at your place. We are now in the full throws of tractor lust.....

glad you never said anything about that Novacaine you have setting thar!

n2billet · 11-27-2010, 11:46 PM

Quote:

Originally Posted by tcb-1

Keither, I'm dropping my 4 year old off at your place. We are now in the full throws of tractor lust.....

glad you never said anything about that Novacaine you have setting thar!

You can't see them but we have over 20 cabinets FULL of JD toy tractors with original boxes dating back to God knows when. My Dad has had custom plows made that cost as much as a set of really nice wheels......when we show them to youngsters they go crazy! This doesn't include what's in the house.....you think I have a problem you should meet my Dad, at least I can say I got it honestly.

butternut1972 · 11-27-2010, 11:49 PM

Glad to see you still have the rambler. Man I love that car, have you been enjoying it much? Earlier in this thread you said you travel alot for work, what do you do for a living? if you don't mind me asking. Great work on the truck, I stared at the core support and radiator cover this morning for it seems like an hour. I reall like the clean and simple style your cars/trucks have.

tcb-1 · 11-27-2010, 11:50 PM

hummmmm, I have to head to Shreveport to pick a set of fenders up for the Caddy in a few weeks...... wanna watch my boy for a day?

**FRENCHBLUE72** · 11-28-2010, 09:29 AM

So glad to see the rambler is still in the stable very simple understated bad ass car.. As far as the new wheels go the only question I have is are they one -off"s or just 22"s

72BlckButy · 11-28-2010, 08:35 PM

Great updates Keith... already changed the sticker on the Stepper?

n2billet · 11-28-2010, 09:15 PM

Quote:

Originally Posted by 72BlckButy

Great updates Keith... already changed the sticker on the Stepper?

Every truck I've owned has had one of those stickers at one point or another.

72BlckButy · 11-28-2010, 09:21 PM

I remember that well on Lucy, especially since I looked those pictures over more than a few times.

My family bleeds JD through and through, with a large collection of toys from many moons ago; not to mention their large scale counterparts.

mcbassin · 11-28-2010, 10:52 PM

Nice collection of John Deeres! Have to say you are giving me some envy issues.

67chevy1series · 11-30-2010, 10:28 PM

well any progress on that 67

n2billet · 12-05-2010, 11:52 AM

Made a little progress on the truck this weekend, finished loosely installing the rear kit. I'm now ready to set the pinion angle and weld on the lower bag mounts. After I get this done I'm going to rebuild the rear end and paint it. I also painted the top of the grill to match the engine compartment and stuck it on the truck so I would knock it over (again). I had to modify the tank and make some mounts to work around the rear kit but it should be good to go now.

11-24-2010, 08:39 PM	#1
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Hazel the older Sister.... i have angle back exhaust manifolds if you get yours runnin before mine tell me how it sounds with them

11-25-2010, 01:50 AM	#2
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Hazel the older Sister.... Awesome work and attention to details as always! That shop looks just like the one I want......... in my dreams. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-26-2010, 10:13 PM	#3
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Hazel the older Sister.... I got a little work done this week since the boss man gave me an extra day or two off. I finished up the air box thingy I made and got it painted. I finally ran the heater hoses through the cut down heater box (I should have shaved the firewall and been done with it) so I painted it while I was squirting flat black. Nathan sent me his new hinges so I got those painted and installed. I spent the last two days painting so now I can bolt some stuff back on. I still need to undercoat the lower firewall but this is the first time the fenders and the inner fenders have been on the truck in a long time and they are not coming off. I stood and looked at the inner fenders for about an hour and realized I really don't like them and I should have not been so lazy and made a nicer set but it's just a patina driver and it will have to do....board member elz (Jarod) hooked me up with a better set of script covers so I body worked and got those in primer after the big meal yesterday......I should have those painted next week, thanks again Jarod! Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold Last edited by n2billet; 11-26-2010 at 10:20 PM.

11-26-2010, 10:16 PM	#4
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Hazel the older Sister.... ooooooooooooo that looks nice i cant wit to see it finished can you take some pics of how she sits now is she all on the frame or is she still all dismembered

11-26-2010, 10:59 PM	#6
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: Hazel the older Sister.... I cant wait.... This thing looks great!

11-26-2010, 11:31 PM	#7
travlinman Registered User Join Date: Feb 2009 Location: stockton ca. Posts: 502	Re: Hazel the older Sister.... i may have missed it but what are u going to use for a wiper motor? and were did u get that block off box/plate for the heater? __________________ 94 ls swap silverado 65 Pontiac 78 c30 crew cab dually (parted and gone) 82 c30 crew cab dually ( now building ) 91 r30 crew cab dually (parted and gone) 69 swb-sold 71 lab sold all in progress......__ ..........._______ \|__\__ ..........\|__(O)______(O)] ........................

11-26-2010, 11:42 PM	#8
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Hazel the older Sister.... Looking good man, really good! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

11-27-2010, 12:43 AM	#10
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Hazel the older Sister.... im pretty sure they fiberglassed right over the holes and stuff

11-27-2010, 10:59 PM	#14
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Hazel the older Sister.... super progress! I like the heater box mod. its subtle and looks smooth! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-27-2010, 11:37 PM	#15
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Hazel the older Sister.... Keither, I'm dropping my 4 year old off at your place. We are now in the full throws of tractor lust..... glad you never said anything about that Novacaine you have setting thar! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

11-27-2010, 11:49 PM	#17
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: Hazel the older Sister.... Glad to see you still have the rambler. Man I love that car, have you been enjoying it much? Earlier in this thread you said you travel alot for work, what do you do for a living? if you don't mind me asking. Great work on the truck, I stared at the core support and radiator cover this morning for it seems like an hour. I reall like the clean and simple style your cars/trucks have.

11-27-2010, 11:50 PM	#18
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Hazel the older Sister.... hummmmm, I have to head to Shreveport to pick a set of fenders up for the Caddy in a few weeks...... wanna watch my boy for a day? __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

11-28-2010, 09:29 AM	#19
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,602	Re: Hazel the older Sister.... So glad to see the rambler is still in the stable very simple understated bad ass car.. As far as the new wheels go the only question I have is are they one -off"s or just 22"s __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-28-2010, 08:35 PM	#20
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Hazel the older Sister.... Great updates Keith... already changed the sticker on the Stepper? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-28-2010, 09:21 PM	#22
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Hazel the older Sister.... I remember that well on Lucy, especially since I looked those pictures over more than a few times. My family bleeds JD through and through, with a large collection of toys from many moons ago; not to mention their large scale counterparts. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 11-28-2010 at 09:22 PM.



Register or Log In To remove these advertisements.

11-28-2010, 10:52 PM	#23
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Hazel the older Sister.... Nice collection of John Deeres! Have to say you are giving me some envy issues. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-30-2010, 10:28 PM	#24
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Hazel the older Sister.... well any progress on that 67

12-05-2010, 11:52 AM	#25
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Hazel the older Sister.... Made a little progress on the truck this weekend, finished loosely installing the rear kit. I'm now ready to set the pinion angle and weld on the lower bag mounts. After I get this done I'm going to rebuild the rear end and paint it. I also painted the top of the grill to match the engine compartment and stuck it on the truck so I would knock it over (again). I had to modify the tank and make some mounts to work around the rear kit but it should be good to go now. Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold Last edited by n2billet; 12-05-2010 at 11:54 AM.

Register or Log In To remove these advertisements.