Boyd Welding-67-72 Rear Mount Aluminum Tank - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drtydog · 08-21-2011, 03:19 AM

Will this tank fit on in a 63 short fleetside?: If it will I would like one.

eagleuh1 · 08-21-2011, 06:53 AM

Sounds good on the group buy. I bought one already from board member whos vehicle was destroyed by Joplin tornadoe. Great tank. I think it would be a better tank if the fill location on side fill tank was moved toward front of tank about 1/2 inch to clear triangle frame brace better and raised about 1/2 inch to clear frame rail. This would still give plenty of clearance to bed cross sill and bed floor. Hopefully have mine plumbed soon. Looks awesome sitting between the frame rails. Jim

chevychase · 08-21-2011, 09:27 PM

stevess11 · 08-23-2011, 10:30 PM

im in for a non efi. woodbed floor fill

mighty_mike015 · 08-24-2011, 07:33 AM

Possibly interested in an efi tank, side fill.

mac · 08-26-2011, 10:00 PM

Dave - I'm in for a non-efi, bed fill, ROV and 90 ohm sender set-up. Let me know when you're ready to pull the trigger. Mac

Shooters_7 · 08-27-2011, 11:25 AM

Quote:

Originally Posted by Daveboyd

Ok you guys twisted my arm... I will get the details together on this years final group buy.

everyone chime in and let me know how many tanks to expect and what type, EFI or NON EFI so we can start preparing production and getting the supplies on their way.

i am going to go back through this forum and take a look at all of the prices we have offered. I will try to break the record lowest price.

Just got back from Iraq and need a EFI, in bed fill tank and in tank fuel pump option as I'll be running an LS1. The truck is a 1966 C10 SWB. Thanks

Timbo1 · 08-28-2011, 03:18 PM

needing a non efi tank.

c10seconds · 08-28-2011, 04:18 PM

EFI Tank for me
Posted via Mobile Device

funkytechmonkey · 08-28-2011, 06:17 PM

Wish I would have waited for this group buy... Finally got mine installed and its pretty incredible. Looks great...fit great...easy to install. I give them an A+ on it!!

**Clyde65** · 08-28-2011, 10:20 PM

That looks real good Brian, it is so temping to get one of these....must resist...

creepdogg · 08-28-2011, 10:56 PM

Quote:

Originally Posted by funkytechmonkey

Wish I would have waited for this group buy... Finally got mine installed and its pretty incredible. Looks great...fit great...easy to install. I give them an A+ on it!!

I see you are running the PB rear tubular crossmembers, did you need to specially order your tank or is that the standard dimensions?

funkytechmonkey · 08-28-2011, 11:27 PM

It was standard.... Matches up perfect

stoich · 09-01-2011, 11:16 AM

Any updates? The big announcement is supposed to be today. Just waiting for the details and I'm ready to order an EFI tank for fleetside with bed fill. Been waiting foreverrrrrrrr......

Timbo1 · 09-01-2011, 11:20 AM

Waiting also, could use it ASAP. Hope is is soon!!!!

**Daveboyd** · 09-01-2011, 12:42 PM

Well i can launch this anytime and we can build as many tanks as we need. I wont be able to supply the fuel level sending units because of supply problems. i have ordered 150 senders and i will have 20 by the 17th which are already accounted for in production. the rest will be 60 days out.

If everyone is ok with sourcing their own sender I will launch it today.

Timbo1 · 09-01-2011, 12:48 PM

Launch Away !!!!!!

automagic67 · 09-01-2011, 02:10 PM

In ok with that as long as you can point us in the right direction with a part number or application.

creepdogg · 09-01-2011, 03:18 PM

Same as above

Lets get em going!

shearjs · 09-01-2011, 05:06 PM

I agree with those guys. I'm ready for this beauty! I would also like a recommendation for the sending unit please. EFI tanks still sent with fuel pump and rollover vent, just no sending unit?

Timbo1 · 09-01-2011, 05:18 PM

Universial 0-90ohm sending unit on Ebay for roughly $50.00 (new)

**Daveboyd** · 09-01-2011, 08:12 PM

GROUP BUY!!!

STANDARD NON-EFI TANK $299.00 SHIPPED ANYWHERE IN THE LOWER 48 INCLUDES ROLL OVER SAFETY VENT

EFI TANK $ 549.00 SHIPPED ANY WHERE IN THE LOWER 48 INCLUDES AEROMOTIVE STEALTH 340 IN-TANK PUMP AND ROLL OVER SAFETY VENT

I am not going to set a limit on how many spots are open but this will only run for 7 days.

Please remember because of supply issues we will NOT be supplying a Fuel level sending unit in your tanks. you will need to source them yourself. any aftermarket 5 bolt sending unit will work with the flange that will be welded to your tank. 67-72 chevy trucks use a 0-90 ohm sending unit.

Also notice that we have upgraded the pumps in all EFI tanks from the Walbro to the Aeromotive Stealth 340 part # 11142.

With this pricing there will not be able to be any structural or fitting changes. Fabrication times are 7-10 business days

The website is now updated with the special pricing and ready to go. Purchase your tank here: http://www.boydwelding.com/category/products/chevrolet

call me if you have issues placing your order.

funkytechmonkey · 09-01-2011, 08:44 PM

Pppsshhhhh.... Wish I would have waited for this deal. I should buy a second one just to have it for my next build 3 years down the road.

**Daveboyd** · 09-01-2011, 08:47 PM

Quote:

Originally Posted by funkytechmonkey

Pppsshhhhh.... Wish I would have waited for this deal. I should buy a second one just to have it for my next build 3 years down the road.

I did see there were 1 or 2 orders that were placed today. I will be applying this group buy price to those when i get in the office tomorrow morning.

funkytechmonkey · 09-01-2011, 09:23 PM

Dave... I bought mine a few months ago, already installed it and love it. There are some pics if you scroll up. Thanks for the good work!!

08-21-2011, 03:19 AM	#476
drtydog Registered User Join Date: May 2011 Location: Cincinnati Ohio Posts: 58	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Will this tank fit on in a 63 short fleetside?: If it will I would like one. __________________

08-21-2011, 06:53 AM	#477
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Sounds good on the group buy. I bought one already from board member whos vehicle was destroyed by Joplin tornadoe. Great tank. I think it would be a better tank if the fill location on side fill tank was moved toward front of tank about 1/2 inch to clear triangle frame brace better and raised about 1/2 inch to clear frame rail. This would still give plenty of clearance to bed cross sill and bed floor. Hopefully have mine plumbed soon. Looks awesome sitting between the frame rails. Jim

08-21-2011, 09:27 PM	#478
chevychase Registered User Join Date: Jun 2007 Location: Boca Raton, FL Posts: 476	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank __________________ Joe

08-23-2011, 10:30 PM	#479
stevess11 Registered User Join Date: Aug 2004 Location: sedalia mo Posts: 77	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank im in for a non efi. woodbed floor fill

08-24-2011, 07:33 AM	#480
mighty_mike015 Registered User Join Date: Jan 2009 Location: Southern Indiana Posts: 63	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Possibly interested in an efi tank, side fill.

08-26-2011, 10:00 PM	#481
mac Active Member Join Date: Jan 2005 Location: Spokane WA Posts: 166	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave - I'm in for a non-efi, bed fill, ROV and 90 ohm sender set-up. Let me know when you're ready to pull the trigger. Mac

08-28-2011, 03:18 PM	#483
Timbo1 Registered User Join Date: Apr 2011 Location: Gilbert Az Posts: 260	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank needing a non efi tank.

08-28-2011, 04:18 PM	#484
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank EFI Tank for me Posted via Mobile Device

08-28-2011, 06:17 PM	#485
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Wish I would have waited for this group buy... Finally got mine installed and its pretty incredible. Looks great...fit great...easy to install. I give them an A+ on it!! __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

08-28-2011, 10:20 PM	#486
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank That looks real good Brian, it is so temping to get one of these....must resist... __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

08-28-2011, 11:27 PM	#488
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank It was standard.... Matches up perfect __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

09-01-2011, 11:16 AM	#489
stoich Registered User Join Date: May 2010 Location: Tucson, AZ Posts: 5	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Any updates? The big announcement is supposed to be today. Just waiting for the details and I'm ready to order an EFI tank for fleetside with bed fill. Been waiting foreverrrrrrrr...... __________________ 72 Fleetside longbed...97 Z-28 full electronic powertrain (LT1 350/4L60E) powertrain tuned by Bryan Herter (366 RWHP/348TQ). Wood bed with rear leaf spring suspension.

09-01-2011, 11:20 AM	#490
Timbo1 Registered User Join Date: Apr 2011 Location: Gilbert Az Posts: 260	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Waiting also, could use it ASAP. Hope is is soon!!!!

09-01-2011, 12:42 PM	#491
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Well i can launch this anytime and we can build as many tanks as we need. I wont be able to supply the fuel level sending units because of supply problems. i have ordered 150 senders and i will have 20 by the 17th which are already accounted for in production. the rest will be 60 days out. If everyone is ok with sourcing their own sender I will launch it today. __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

09-01-2011, 12:48 PM	#492
Timbo1 Registered User Join Date: Apr 2011 Location: Gilbert Az Posts: 260	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Launch Away !!!!!!



Register or Log In To remove these advertisements.

09-01-2011, 02:10 PM	#493
automagic67 Registered User Join Date: Apr 2007 Location: Las Vegas Nv Posts: 21	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank In ok with that as long as you can point us in the right direction with a part number or application.

09-01-2011, 03:18 PM	#494
creepdogg Registered User Join Date: Jul 2011 Location: Ann Arbor Posts: 453	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Same as above Lets get em going!

09-01-2011, 05:06 PM	#495
shearjs Registered User Join Date: Mar 2011 Location: Thompsons Station, TN Posts: 700	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I agree with those guys. I'm ready for this beauty! I would also like a recommendation for the sending unit please. EFI tanks still sent with fuel pump and rollover vent, just no sending unit? __________________ -Jason '72 Family Hauler Rufus' Restoration - 70 GMC, LS swap - SOLD

09-01-2011, 05:18 PM	#496
Timbo1 Registered User Join Date: Apr 2011 Location: Gilbert Az Posts: 260	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Universial 0-90ohm sending unit on Ebay for roughly $50.00 (new)

09-01-2011, 08:12 PM	#497
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank GROUP BUY!!! STANDARD NON-EFI TANK $299.00 SHIPPED ANYWHERE IN THE LOWER 48 INCLUDES ROLL OVER SAFETY VENT EFI TANK $ 549.00 SHIPPED ANY WHERE IN THE LOWER 48 INCLUDES AEROMOTIVE STEALTH 340 IN-TANK PUMP AND ROLL OVER SAFETY VENT I am not going to set a limit on how many spots are open but this will only run for 7 days. Please remember because of supply issues we will NOT be supplying a Fuel level sending unit in your tanks. you will need to source them yourself. any aftermarket 5 bolt sending unit will work with the flange that will be welded to your tank. 67-72 chevy trucks use a 0-90 ohm sending unit. Also notice that we have upgraded the pumps in all EFI tanks from the Walbro to the Aeromotive Stealth 340 part # 11142. With this pricing there will not be able to be any structural or fitting changes. Fabrication times are 7-10 business days The website is now updated with the special pricing and ready to go. Purchase your tank here: http://www.boydwelding.com/category/products/chevrolet call me if you have issues placing your order. __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

09-01-2011, 08:44 PM	#498
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Pppsshhhhh.... Wish I would have waited for this deal. I should buy a second one just to have it for my next build 3 years down the road. __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

09-01-2011, 09:23 PM	#500
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave... I bought mine a few months ago, already installed it and love it. There are some pics if you scroll up. Thanks for the good work!! __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

Register or Log In To remove these advertisements.