72 Suburban Build - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*project 67 sub* · 10-14-2011, 02:36 PM

is your trans raised to compensate for the raised motor due to the dropmember or no, it looks like it is?

yah sure why not, how much taller than a stock depth one?

and your exhaust looks good by the way, looks like the front part hangs slightly below the frame or is that just the angle of the pic?

k5hart · 10-14-2011, 02:37 PM

Looks good! It's seem pretty close to the wheels but I guess it's clearing. Did you take those noisy mufflers off??

*project 67 sub* · 10-14-2011, 02:43 PM

nah they are not really that close, just looks that way from the pic. mine is done almost exactly the same and it doesn't hit the tires at all from lock to lock laid out or lifted up

bruin_d · 10-14-2011, 02:46 PM

Quote:

Originally Posted by project 67 sub

is your trans raised to compensate for the raised motor due to the dropmember or no, it looks like it is?

yah sure why not, how much taller than a stock depth one?

and your exhaust looks good by the way, looks like the front part hangs slightly below the frame or is that just the angle of the pic?

Yes, its raised with the motor for the dropmember. I'll measure the pans for you(there may be a good corner left of the old one to get the height...). Its all above the frame line, probably just the picture angle.

bruin_d · 10-14-2011, 02:47 PM

Quote:

Originally Posted by k5hart

Looks good! It's seem pretty close to the wheels but I guess it's clearing. Did you take those noisy mufflers off??

No way!!! One chambered flowmasters are still there! It clears fine with no issues.

*project 67 sub* · 10-14-2011, 02:48 PM

ok cool bro thanks, i cant get under mine right now, to much crap around it and too dirty in the garage under it...

mine leaks too

budnikguy · 10-14-2011, 05:00 PM

What is happening in Temecula this weekend???

bruin_d · 10-14-2011, 05:10 PM

Quote:

Originally Posted by budnikguy

What is happening in Temecula this weekend???

The Fall Temecula Rod Run.

Mulk · 10-14-2011, 10:40 PM

Exhaust looks great. I took your advice, from a couple months back, and I did mine the same way while you were on your travels. I just haven't cut the holes yet.
Posted via Mobile Device

bruin_d · 10-15-2011, 04:42 PM

Quote:

Originally Posted by Mulk

Exhaust looks great. I took your advice, from a couple months back, and I did mine the same way while you were on your travels. I just haven't cut the holes yet.
Posted via Mobile Device

I just checked yours out. Looking good!

bruin_d · 10-15-2011, 04:45 PM

My son's first ride in the Burb on the way to his first car show. There was some nice stuff there. With a big block, noisy gear drive, and one chambered flowmasters he actually managed to fall asleep on the drive.

*project 67 sub* · 10-15-2011, 04:55 PM

sweet, did you take any pics??? if so post em up

**kev2809** · 10-15-2011, 06:23 PM

nice...x2

id love to see some car show pics!

Mulk · 10-15-2011, 09:44 PM

That's an awesome picture. Makes me miss mine when they were that age.
Posted via Mobile Device

jbclassix · 10-16-2011, 01:50 AM

Hey, that looks like the Saftey 1st brand Alpha Omega convertible car seat there...

bruin_d · 10-16-2011, 01:57 PM

Some pics from the show...

bruin_d · 10-16-2011, 02:01 PM

More...

bruin_d · 10-16-2011, 02:05 PM

And finally...the trucks. The last one was the nicest I saw all day

. The black one that my wife and son are in front of had a Hemi in it.

bruin_d · 10-16-2011, 02:10 PM

Here they are...

VA72C10 · 10-16-2011, 02:12 PM

Nice pics! Thanks for sharing

*project 67 sub* · 10-16-2011, 02:33 PM

sweet

**67cheby** · 10-16-2011, 05:42 PM

sweet rides...love that doublecab

bruin_d · 10-16-2011, 06:05 PM

Quote:

Originally Posted by 67cheby

sweet rides...love that doublecab

The doublecab had drag radials and a nice little Turbo motor in it...I also loved it

**67cheby** · 10-16-2011, 06:27 PM

Sweet !

*project 67 sub* · 10-16-2011, 08:27 PM

that 62 bel air bubble top is super sweet, would love to have it

10-14-2011, 02:36 PM	#476
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 72 Suburban Build is your trans raised to compensate for the raised motor due to the dropmember or no, it looks like it is? yah sure why not, how much taller than a stock depth one? and your exhaust looks good by the way, looks like the front part hangs slightly below the frame or is that just the angle of the pic?

10-14-2011, 02:37 PM	#477
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	Re: 72 Suburban Build Looks good! It's seem pretty close to the wheels but I guess it's clearing. Did you take those noisy mufflers off?? __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

10-14-2011, 02:43 PM	#478
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 72 Suburban Build nah they are not really that close, just looks that way from the pic. mine is done almost exactly the same and it doesn't hit the tires at all from lock to lock laid out or lifted up

10-14-2011, 02:48 PM	#481
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 72 Suburban Build ok cool bro thanks, i cant get under mine right now, to much crap around it and too dirty in the garage under it... mine leaks too

10-14-2011, 05:00 PM	#482
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 72 Suburban Build What is happening in Temecula this weekend???

10-14-2011, 10:40 PM	#484
Mulk Registered User Join Date: Mar 2010 Location: Sin City, Nevada Posts: 152	Re: 72 Suburban Build Exhaust looks great. I took your advice, from a couple months back, and I did mine the same way while you were on your travels. I just haven't cut the holes yet. Posted via Mobile Device __________________ Eric '68 C20 Suburban, Bagged with Suicide 3rd Door, and Loaded with a 396 - Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=403690

10-15-2011, 04:45 PM	#486
bruin_d Registered User Join Date: Mar 2011 Location: Chesapeake, VA Posts: 578	Re: 72 Suburban Build My son's first ride in the Burb on the way to his first car show. There was some nice stuff there. With a big block, noisy gear drive, and one chambered flowmasters he actually managed to fall asleep on the drive. Attached Images __________________ My 72 Suburban Build - http://67-72chevytrucks.com/vboard/s...d.php?t=454019 79 Volvo Turbo LS Build - http://67-72chevytrucks.com/vboard/s...d.php?t=594252 Buggy Bed for son - http://67-72chevytrucks.com/vboard/s...d.php?t=657350

10-15-2011, 04:55 PM	#487
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 72 Suburban Build sweet, did you take any pics??? if so post em up

10-15-2011, 06:23 PM	#488
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: 72 Suburban Build nice...x2 id love to see some car show pics! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

10-15-2011, 09:44 PM	#489
Mulk Registered User Join Date: Mar 2010 Location: Sin City, Nevada Posts: 152	Re: 72 Suburban Build That's an awesome picture. Makes me miss mine when they were that age. Posted via Mobile Device __________________ Eric '68 C20 Suburban, Bagged with Suicide 3rd Door, and Loaded with a 396 - Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=403690

10-16-2011, 01:50 AM	#490
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: 72 Suburban Build Hey, that looks like the Saftey 1st brand Alpha Omega convertible car seat there... __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

10-16-2011, 01:57 PM	#491
bruin_d Registered User Join Date: Mar 2011 Location: Chesapeake, VA Posts: 578	Re: 72 Suburban Build Some pics from the show... Attached Images __________________ My 72 Suburban Build - http://67-72chevytrucks.com/vboard/s...d.php?t=454019 79 Volvo Turbo LS Build - http://67-72chevytrucks.com/vboard/s...d.php?t=594252 Buggy Bed for son - http://67-72chevytrucks.com/vboard/s...d.php?t=657350

10-16-2011, 02:01 PM	#492
bruin_d Registered User Join Date: Mar 2011 Location: Chesapeake, VA Posts: 578	Re: 72 Suburban Build More... Attached Images __________________ My 72 Suburban Build - http://67-72chevytrucks.com/vboard/s...d.php?t=454019 79 Volvo Turbo LS Build - http://67-72chevytrucks.com/vboard/s...d.php?t=594252 Buggy Bed for son - http://67-72chevytrucks.com/vboard/s...d.php?t=657350

10-16-2011, 02:05 PM	#493
bruin_d Registered User Join Date: Mar 2011 Location: Chesapeake, VA Posts: 578	Re: 72 Suburban Build And finally...the trucks. The last one was the nicest I saw all day . The black one that my wife and son are in front of had a Hemi in it. __________________ My 72 Suburban Build - http://67-72chevytrucks.com/vboard/s...d.php?t=454019 79 Volvo Turbo LS Build - http://67-72chevytrucks.com/vboard/s...d.php?t=594252 Buggy Bed for son - http://67-72chevytrucks.com/vboard/s...d.php?t=657350

10-16-2011, 02:10 PM	#494
bruin_d Registered User Join Date: Mar 2011 Location: Chesapeake, VA Posts: 578	Re: 72 Suburban Build Here they are... Attached Images __________________ My 72 Suburban Build - http://67-72chevytrucks.com/vboard/s...d.php?t=454019 79 Volvo Turbo LS Build - http://67-72chevytrucks.com/vboard/s...d.php?t=594252 Buggy Bed for son - http://67-72chevytrucks.com/vboard/s...d.php?t=657350



Register or Log In To remove these advertisements.

10-16-2011, 02:12 PM	#495
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 72 Suburban Build Nice pics! Thanks for sharing __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-16-2011, 02:33 PM	#496
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 72 Suburban Build sweet

10-16-2011, 05:42 PM	#497
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 72 Suburban Build sweet rides...love that doublecab __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-16-2011, 06:27 PM	#499
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 72 Suburban Build Sweet ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-16-2011, 08:27 PM	#500
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 72 Suburban Build that 62 bel air bubble top is super sweet, would love to have it

Register or Log In To remove these advertisements.