The 60-66 "PAYING IT FORWARD" thread!

[72cs20]

Originally Posted by 72cs20

I have two good original wire harnesses that need new homes. One from a 66 K20 and one from a 62 C20. The wires and connectors are in good condition. They both have the dash and engine portions. Neither one has a complete harness to the rear.

The 66 had gauges and hazard light switch. The 62 had idiot lights.

66 harness spoken for. 62 harness still available

[72cs20]

New repro 64-66 2wd gas pedal.

[goatless]

All from a 1964 C10:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Radiator. Has leak

Local pickup only.

[val1gonzales]

I need the 66 wiring harness. Mine is all taped up and ready to start a fire.

[goatless]

All from a 1964 C10:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Radiator. Has leak
* Left and right doors.

[Short 3/4]

Originally Posted by goatless

All from a 1964 C10:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Radiator. Has leak
* Left and right doors.

Doors look a lot better than the ones I have. I'll be in the Bay Area the weekend of Feb 12-13. If they are as good as the pictures look I would love to pick them up
Tom

[Short 3/4]

Originally Posted by Short 3/4

Doors look a lot better than the ones I have. I'll be in the Bay Area the weekend of Feb 12-13. If they are as good as the pictures look I would love to pick them up
Tom

I am assuming you are in the Mountain View near San Francisco. If so, please PM me, as I want them
Thanks
Tom

[goatless]

Originally Posted by Short 3/4

I am assuming you are in the Mountain View near San Francisco. If so, please PM me, as I want them
Thanks
Tom

Yes, I am in MV near SF. I'll send a PM.

[roll_the_dice]

Originally Posted by goatless

All from a 1964 C10:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Radiator. Has leak
* Left and right doors.

Would love the "Approximately 2 year old used master cylinder - Single reservoir original type" if it doesn't have any rust on the inside. I can pay for shipping. Thanks, let me know.

Andy

[goatless]

Originally Posted by roll_the_dice

Would love the "Approximately 2 year old used master cylinder - Single reservoir original type" if it doesn't have any rust on the inside. I can pay for shipping. Thanks, let me know.

Andy

PM sent.

[goatless]

Originally Posted by goatless

PM sent.

Uploaded pics for reference.

[62K20]

72cs20, I'll take the 62 wire harness if it's still available.

[72cs20]

Originally Posted by 62K20

72cs20, I'll take the 62 wire harness if it's still available.

It's yours. PM me your shipping details.

[val1gonzales]

72CS20 just got the wiring harness today! It's in great condition and I can even read the lettering on the fuse block! Already got my fire-hazard wiring out. Going to get on cleaning this one up and ready for install. Thank you very much. Good looking out!

[72cs20]

Originally Posted by val1gonzales

72CS20 just got the wiring harness today! It's in great condition and I can even read the lettering on the fuse block! Already got my fire-hazard wiring out. Going to get on cleaning this one up and ready for install. Thank you very much. Good looking out!

Great! Glad to help.

[goatless]

All from a 1964 C10:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Radiator. Has leak
* Left and right doors - Gone.
* Monroe 33033 shocks. About 18 months old.

[bhap]

Parts from a 1962 C10 - located in Pittsburgh, PA - pick up or pay shipping and they are yours:

Front spindles & brake drums - 1 spindle almost new, new bearings on both sides

Behind seat fuel tank - tank is solid but does have some interior surface rust

Front chrome bumper - decent chrome but has a bit of a "twist"

Brake & clutch hydraulic master cylinder - surface rust but looks ok inside - 2 yrs old

Steering shaft complete with center joint - need rag joint

Manual steering box - a little loose

Come get what you need - I hate to throw things away - prefer someone uses them

[ACK]

Originally Posted by bhap

Parts from a 1962 C10 - located in Pittsburgh, PA - pick up or pay shipping and they are yours:

Front spindles & brake drums - 1 spindle almost new, new bearings on both sides

Behind seat fuel tank - tank is solid but does have some interior surface rust

Front chrome bumper - decent chrome but has a bit of a "twist"

Brake & clutch hydraulic master cylinder - surface rust but looks ok inside - 2 yrs old

Steering shaft complete with center joint - need rag joint

Manual steering box - a little loose

Come get what you need - I hate to throw things away - prefer someone uses them

Is the manual steering box still available? If yes, I'll take it if shipping isn't crazy, say no more than $20. Thanks for paying it forward.

[72Mountaineer]

Originally Posted by goatless

All from a 1964 C10:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Radiator. Has leak
* Left and right doors - Gone.
* Monroe 33033 shocks. About 18 months old.

PM'd you about the track bar.

[goatless]

All from a 1964 C10:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Radiator. Has leak
* Monroe 33033 shocks. About 18 months old.
* Book: "Rochester Carburetors", by Doug Roe and Bill Fisher

[val1gonzales]

I'm interested in that Rochester manual. I've got a 4GC that I've been needing to put back together. My memory of the disassembly has faded.

[forestb]

Getting rid of a wheel. I don’t know anything about it other than it was in my spare tire rack when I bought the truck. It is not a split rim and it will not fit on disk breaks. It has some surface rust. If nobody takes it it’s going into the trash. I am not willing to ship it. If they look like they are too far gone let me know.

[oem4me]

Originally Posted by forestb

Getting rid of a wheel. I don’t know anything about it other than it was in my spare tire rack when I bought the truck. It is not a split rim and it will not fit on disk breaks. It has some surface rust. If nobody takes it it’s going into the trash. I am not willing to ship it. If they look like they are too far gone let me know.

Hey neighbor! If that's a 16" wheel, I'll take it!
If 15", I'll let the next guy have it as I'm presently flush with those.
PM coming.

[oem4me]

Originally Posted by forestb

Getting rid of a wheel. I don’t know anything about it other than it was in my spare tire rack when I bought the truck. It is not a split rim and it will not fit on disk breaks. It has some surface rust. If nobody takes it it’s going into the trash. I am not willing to ship it. If they look like they are too far gone let me know.

I took a quick look at a stock 15" wheel and it measures the same as yours in the photo. So, I'm going to pass. Thanks though.

[Asshat]

SOLD.....

Speakers for almost anything.
RetroSound.
You pay shipping, maybe $12-15