![]() |
![]() |
#476 |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,122
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Yesterdays progress: For those of you that haven't sanded a complete truck before, on the exterior, the tailgate is the worst part. Lots of lines, nooks, etc. Complete pain. Almost 3 hours and I didn't touch the lettering. I'n mot sure what I'm going to use in those yet. It came out real good though.
I spent a couple hours at the local body shop yesterday watching them paint on a car. Learned some things, and I think I am at least ready to do the things like the engine compartment, front of the bed, etc. So I'll be able to have it jammed and together for the outside paint at some point. I think I'm going to tow it over there (1 block away) when I'm at that point so they can spray the outside in the booth. They have been real helpful all through this. Let me borrow tools, answering my questions, etc. Not sure I've been a nuisance to them or if they like sharing, but it's been appreciated. ![]() ![]()
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
![]() |
![]() |
![]() |
#477 |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,122
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Between yesterday and this morning I got 95% of the truck sanded with 180. All thats left is the rockers, below the rear window, center of the cowl, and above the windshield. There are just a few small low spots to take care of. I won't get to them til later in the week, but I should be shooting primer again for the final coat next weekend.
![]() ![]() ![]() ![]()
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
![]() |
![]() |
![]() |
#478 |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Looks better every time!!!
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() |
![]() |
![]() |
![]() |
#479 |
Registered User
Join Date: Feb 2010
Location: Walnut Grove, Ca
Posts: 216
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Read this whole thread..my eyes hurt...haha... Man I cant wait to sand... :P
__________________
66 Gmc 1 ton. Long Step 351e V6 69 1/2 CHEVROLET (now a shortbed) LONGBED! ![]() ![]() 61 Shortbed Fleetside 1/2 ton.. in progress Next a 50-53! MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=447926 |
![]() |
![]() |
![]() |
#480 | |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,122
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Thanks!
Quote:
I'll be back out there today working on it. Should have a couple pics representing more SANDING tonight. ![]()
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
|
![]() |
![]() |
![]() |
#481 |
Registered User
Join Date: Feb 2010
Location: Walnut Grove, Ca
Posts: 216
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
This is my last day of an 8 day vacation.Screwed my sleeping schedule. DIDNT GET NEAR WHAT I WANTED TO DO ON THE TRUCK!!! but I had lots of lazy time, that and I ran into a couple of snags.. Definately going to have the cab blasted by the end of the month.. stripping the bed is enough... take a couple week break and see how i feel about the front clip...
__________________
66 Gmc 1 ton. Long Step 351e V6 69 1/2 CHEVROLET (now a shortbed) LONGBED! ![]() ![]() 61 Shortbed Fleetside 1/2 ton.. in progress Next a 50-53! MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=447926 |
![]() |
![]() |
![]() |
#482 |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,122
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Took longer than expected to get back into the garage, but we take what we can get, right? Finished filling the last of the low spots, found 7 that needed a touch of filler. Sanded those back down, then sprayed a little etch primer on any spots that showed bare metal. I'll sand those later and prep it for what I hope is the last primer coat. Not sure when I'll get to that, kind of busy lately. Wish me luck.
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
![]() |
![]() |
![]() |
#483 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,859
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
I know that feeling. I got to see mine yesterday when I went to take out the mower. We'll get them done though....eventually.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#484 |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,122
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Finally made some progress. Wiped it all down and sprayed another coat of primer. It's grey again. Hopefully it's enough to fill the 180 sanding scratches. I might just sand one panel and see how it looks, then add another coat if needed.
![]()
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
![]() |
![]() |
![]() |
#485 |
Registered User
![]() Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
It's amazing how that no matter how much i get on this forum, I always find a thread I've never seen! Great back story, great build!
|
![]() |
![]() |
![]() |
#486 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Nice progress! I have to get my vette running again, and then it's back to the body shop to fix some stuff. I'm not looking forward to it again!
![]()
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
#487 |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,122
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
I got an estimate from the body shop that has been helping me out along the way with advice, tools, etc. and let them finish the paint from this point. All that's left really is just more sanding and the spraying. From my experiences so far I know I am not ready to do the painting myself and would just be disappointed and frustrated with the mistakes.
I pulled off the front clip today. They will start by painting the insides of the fenders and hood. Next I'm pulling the bed off and will work on repairing the rust in the floor, while they have the truck with the cab on it to do the inside, firewall, backside, etc. We'll get the front clip back on and hopefully I'll have the bed ready to go. The next week or 2 is busy for them, but hopefully it's all in paint by Memorial weekend. I might actually see color on these front panels later this week, but it will probably be longer. They might actually let me do some spraying under instruction. I also need to get the electric fuel pump and return line installed while the bed is off. And make the mod for the fuel filler I have planned. Should be a fun month, and a funner summer. Lots of things to keep me out of trouble between this and the Jimmy project.
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
![]() |
![]() |
![]() |
#488 |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Super cool update!!!
Congrats and hope it works out well and you see it in color and get to cruise in before this summer is over!!!
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() |
![]() |
![]() |
![]() |
#489 |
Registered User
Join Date: Aug 2010
Location: Hoofddorp, the Netherlands
Posts: 582
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
After all those hours of sanding, blocking etc etc wouldn't you just want to practise on some old car door and then have a go at it? you've come so far!
__________________
Feedback is always welcome! projects: 1969 Chevy C10 1950 GMC 100 1958 Chevy C60 Viking ratrod Last edited by Steve-W; 05-02-2011 at 05:03 PM. |
![]() |
![]() |
![]() |
#490 |
Registered User
![]() Join Date: Mar 2010
Location: Piper, KS
Posts: 683
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Awesome job. Keep up the end looks near.
|
![]() |
![]() |
![]() |
#491 | ||
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,122
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Quote:
Quote:
There is a difference between painting a panel on a stand in the flat position and reaching over the back of the cab to spray the drip rail, or reaching over the fender to get the top of the windshield frame, and getting low enough for a good angle on the bottom of the rockers and doors, etc. Could I do it, sure. Would I be happy with the results? That is a huge maybe. And after all of the prep work, it is not worth the experiment on this truck. It means too much to me. I have another project (The Jimmy) that I plan on seeing through to the end. I can choose a more forgiving paint (non-metallic) and color (brighter) on that. I've learned a lot so far. I need to learn more yet and this is the rig to learn that next stage on. Thanks. Once I agreed to let the body shop do it, I was finally able to picture myself finishing the project. The end is near indeed.
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
||
![]() |
![]() |
![]() |
#492 |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,122
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Desparately seeking turquoise arm rests. As far as I know the color is not being re-produced. I've placed an ad in the parts section here:
http://67-72chevytrucks.com/vboard/s...d.php?t=461497 If anyone has some or possibly know where some may be found or purchased, please PM me and/or post on my wtb ad.
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
![]() |
![]() |
![]() |
#493 |
Registered User
Join Date: May 2011
Location: Silex Mo
Posts: 180
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Man you have done a great job getting it ready. Cant wait to see it painted. Probaly not as much as you though lol.
|
![]() |
![]() |
![]() |
#494 | |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,122
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Quote:
OK, before we get to that, I'll back up to a couple days ago. Went out to the garage and my hood and fenders were gone. The shop has my permission to come get them, and they did. Checked later that day and the inside of the fenders were sanded and taped for paint. The hood was getting a special caulk put between the hood sheetmetal and the braces underneath. Rather than the old foam pads, they use other stuff that I think may be silicon based that will firm up but stay flexible. It was used around all of the bracing and should really tighten up the hood center from bouncing while driving at interstate speeds. I'll post details of the product later. Yesterday they finished with that stuff in the hood. I got some off time so I got the bed off the truck. No major problems, a scuff in one spot. ![]() The frame is actually black, just covered with sanding dust like everything else. ![]() This morning I started finishing my homemade low hump cover. It's made from a section of floor from a regular cab. I made the rear section to fit, then cut the forward section. There is a seam between them where the firewall meets the floor and that needs trimming to fit the hole in the floor. ![]() Set in place... ![]() Tacked together ![]() Then I pulled it out and added a bunch more tack welds, hammered the flanges underneath together, and tacked them also. ![]() ![]() I'll finish it off with some body seam sealer. Then I mixed up some filler to cover the patches I made for the bottom of the kick panels. ![]() Also heeded the advice from my body man and test fitted the driver side door seal. There is not much gap in the upper rear corner, too much in the lower rear corner. I hammered and used some other tools to bend the seal flange to improve the fit. Made it better, but it's still not right. The shop just finished some work on a 2009 ford and had the old door seals and offered them to me to try out. Those seals went in better than the new original style ones, and filled the gap on the lower section, but was still too tight up top. The advantage though is that the seal actually has 2 squish areas and I think I can use a sharp razor to cut a section out and make it work. The other problem is the seal has an extra inner seal that would be visible inside the cab on this truck, that you don't see on the ford. This could also be removed. Some further testing is needed.
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
|
![]() |
![]() |
![]() |
#495 |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,122
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Now that I got that out of the way, I can move on to the really important stuff.
PAINT!!! ![]() ![]() ![]()
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
![]() |
![]() |
![]() |
#496 |
Registered User
Join Date: Feb 2011
Location: Pittsfield, Ma
Posts: 497
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
WOW! that looks great! you must be happy
__________________
Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily |
![]() |
![]() |
![]() |
#497 |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Congrats! That looks great! I've seen that type of adhesive used on several restored pickups. Did you grab a part number of it?
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() |
![]() |
![]() |
![]() |
#498 |
Registered User
![]() Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Wow, looks great!
|
![]() |
![]() |
![]() |
#499 | |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,122
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
Words can't describe it, even though it's just a start.
Quote:
Thanks. I was somewhat worried I wouldn't like the color after it was on a large area compared to the small samples I had seen. My wife told me this morning I had to take her with me to see it for the first time. Partly to make sure I was ok if I wasn't happy with the choice, mostly to see my face when I finally got to see it for real. She took a picture of me with my cell phone so I could send it around. Maybe I'll post it here too. I can't wait to see the inside of the cab in color.
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
|
![]() |
![]() |
![]() |
#500 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
WOW....congrats
|
![]() |
![]() |
![]() |
Bookmarks |
|
|