Power Steering Adapter Plates - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rudyyloverboiii · 11-20-2014, 05:02 PM

Hey capn i need the adapter plates

**Captainfab** · 11-21-2014, 12:11 AM

How many adapter plates do you need?

I'll send you a PM.

Quote:

Originally Posted by rudyyloverboiii

Hey capn i need the adapter plates

Ronw435 · 11-27-2014, 04:11 PM

Hey Captainfab I am in need of one of your adapter plates for power steering. Do you also know where to get the splined end of the rag joint for the 71 power steering box? My 65 C10 is a smaller diameter than the 71. Also I would like to get the rag joint you showed to weld to my tube with the adapter plate.

Thanks
Ronw435

**Captainfab** · 11-27-2014, 10:06 PM

So you need the steering box adapter plate and the tube and flange? I will send you a PM with ordering and payment info.

You should be able to get the rag joint at your local auto parts supplier.

If for some reason they can't get one for you Summit has them.

http://www.summitracing.com/search/p...ing%20Couplers

Quote:

Originally Posted by Ronw435

Hey Captainfab I am in need of one of your adapter plates for power steering. Do you also know where to get the splined end of the rag joint for the 71 power steering box? My 65 C10 is a smaller diameter than the 71. Also I would like to get the rag joint you showed to weld to my tube with the adapter plate.

Thanks
Ronw435

Ronw435 · 12-05-2014, 11:57 AM

Just received the power steering plate and rag joint adapter. Great looking products there Captain. Definately quality items. Great instructions!
Thanks Captain and the shipping was fast.
Look forward to getting it all installed.

Ronw435

**Captainfab** · 12-06-2014, 02:41 AM

Thanks for the compliments Ronw435

nkoch · 12-14-2014, 06:08 PM

captainfab - I believe I need one of your power steering gear plates and tube and flange.

I have been reading the thread and see that there was comments of drilling 4 new holes for the plate, will I have to do that. I have a 66 c10 that already had the power steering gear and pump. When I swapped out the front end to a 79 I don't recall seeing a plate on there previously and since cant find it. Just curious if I will need to re-drill holes or if the plate will mount right up.

**Captainfab** · 12-15-2014, 12:31 AM

You could use those same holes but that may or may not position the steering box in the correct location.

I will send you a PM with ordering and payment info.

Quote:

Originally Posted by nkoch

captainfab - I believe I need one of your power steering gear plates and tube and flange.

I have been reading the thread and see that there was comments of drilling 4 new holes for the plate, will I have to do that. I have a 66 c10 that already had the power steering gear and pump. When I swapped out the front end to a 79 I don't recall seeing a plate on there previously and since cant find it. Just curious if I will need to re-drill holes or if the plate will mount right up.

Ronw435 · 12-15-2014, 08:54 AM

Installed Captains power steering plate yesterday. Followed instructions that came with it and it came out great. Great piece and great instructions Captain. Everything lined up perfect. Great to see people making quality parts in "America".
Thanks again Captainfab.

**Captainfab** · 12-16-2014, 01:01 AM

Thanks for the compliments Ron

I appreciate the purchase.

**First c10** · 12-23-2014, 01:34 AM

I have a 68 k10 without a dippled frame. Can you sent me a pm on the brackets needed to add power steering? Thanks
Scott

**Captainfab** · 12-24-2014, 12:29 AM

PM sent

**_mg** · 01-03-2015, 03:13 PM

I have a '64 K10, picked up a '87 power steering box and pump from a k20. Need the adapter plate and tube and flange. PM with the details please. Thanks!

**Captainfab** · 01-04-2015, 12:22 AM

I'll send you a PM

w00dst0ck · 02-16-2015, 04:39 PM

Thread diameter/pitch for '72 power steering box?

It's a masterpro, but Oreilly's doesn't list that information. Adapting to a GEN 3 5.3.

**Captainfab** · 02-17-2015, 12:07 AM

They are 7/16"-14. I also replied to your PM regarding this.

Quote:

Originally Posted by w00dst0ck

Thread diameter/pitch for '72 power steering box?

It's a masterpro, but Oreilly's doesn't list that information. Adapting to a GEN 3 5.3.

66-PMD-GMC · 02-17-2015, 05:29 AM

I'd like to find 3" trailing arm perches.

w00dst0ck · 02-17-2015, 10:44 AM

Quote:

Originally Posted by Captainfab

They are 7/16"-14. I also replied to your PM regarding this.

Referring to the lines, not the mounting hardware as I know my pump is not 7/16-14.

Thanks.

w00dst0ck · 02-17-2015, 11:00 AM

Line fittings on gearbox*

**Captainfab** · 02-17-2015, 11:02 AM

Here is the for sale thread for my trailing arm mounts

http://67-72chevytrucks.com/vboard/s...d.php?t=620836

Quote:

Originally Posted by 66-PMD-GMC

I'd like to find 3" trailing arm perches.

**Captainfab** · 02-17-2015, 11:08 AM

OK......Between your posts and PM's to me and jumping between steering box and pump, It has all been confusing. At one point you said that the supplied hardware did not fit your steering box.

If you have a '72 steering box the hose fittings will be SAE. I don't remember the thread pitch off hand, but they are for a 3/8" inverted flare. To adapt those to a the Metric pump on your 5.3 you will either have to have custom hoses made with the appropriate fittings on each end, or you will need the SAE to Metric adapters at the steering box.

Quote:

Originally Posted by w00dst0ck

Referring to the lines, not the mounting hardware as I know my pump is not 7/16-14.

Thanks.

Quote:

Originally Posted by w00dst0ck

Line fittings on gearbox*

w00dst0ck · 02-17-2015, 11:25 AM

FYI guys buying boxes from Oreilly's. I got one yesterday for a '72 and the mounting threads are 3/8-16.

w00dst0ck · 02-17-2015, 11:29 AM

Quote:

Originally Posted by Captainfab

OK......Between your posts and PM's to me and jumping between steering box and pump, It has all been confusing. At one point you said that the supplied hardware did not fit your steering box.

If you have a '72 steering box the hose fittings will be SAE. I don't remember the thread pitch off hand, but they are for a 3/8" inverted flare. To adapt those to a the Metric pump on your 5.3 you will either have to have custom hoses made with the appropriate fittings on each end, or you will need the SAE to Metric adapters at the steering box.

Yeah sorry about that, was a typo. Although it was about the steering box.

Found a thread on adapting the 5.3 stuff to the older boxes. Looks like it's just a Gates fitting and then the factory 3/8 inverted flare lines.

**Captainfab** · 02-18-2015, 12:11 AM

I checked a original '71 C20 steering box as well as a few 80's steering boxes and all have 7/16"-14 threads.

w00dst0ck · 02-18-2015, 10:48 AM

I exchanged it and my new one is 7/16-14 as well.

11-20-2014, 05:02 PM	#476
rudyyloverboiii Registered User Join Date: Nov 2014 Location: IE California Posts: 225	Re: Power Steering Adapter Plates Hey capn i need the adapter plates

11-27-2014, 04:11 PM	#478
Ronw435 Registered User Join Date: Apr 2014 Location: Fate, Texas ( About 35 miles east of Dallas) Posts: 318	Re: Power Steering Adapter Plates Hey Captainfab I am in need of one of your adapter plates for power steering. Do you also know where to get the splined end of the rag joint for the 71 power steering box? My 65 C10 is a smaller diameter than the 71. Also I would like to get the rag joint you showed to weld to my tube with the adapter plate. Thanks Ronw435

12-05-2014, 11:57 AM	#480
Ronw435 Registered User Join Date: Apr 2014 Location: Fate, Texas ( About 35 miles east of Dallas) Posts: 318	Re: Power Steering Adapter Plates Just received the power steering plate and rag joint adapter. Great looking products there Captain. Definately quality items. Great instructions! Thanks Captain and the shipping was fast. Look forward to getting it all installed. Ronw435

12-06-2014, 02:41 AM	#481
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Power Steering Adapter Plates Thanks for the compliments Ronw435 __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

12-14-2014, 06:08 PM	#482
nkoch Registered User Join Date: Jul 2014 Location: Mckinney TX Posts: 5	Re: Power Steering Adapter Plates captainfab - I believe I need one of your power steering gear plates and tube and flange. I have been reading the thread and see that there was comments of drilling 4 new holes for the plate, will I have to do that. I have a 66 c10 that already had the power steering gear and pump. When I swapped out the front end to a 79 I don't recall seeing a plate on there previously and since cant find it. Just curious if I will need to re-drill holes or if the plate will mount right up.

12-15-2014, 08:54 AM	#484
Ronw435 Registered User Join Date: Apr 2014 Location: Fate, Texas ( About 35 miles east of Dallas) Posts: 318	Re: Power Steering Adapter Plates Installed Captains power steering plate yesterday. Followed instructions that came with it and it came out great. Great piece and great instructions Captain. Everything lined up perfect. Great to see people making quality parts in "America". Thanks again Captainfab.

12-16-2014, 01:01 AM	#485
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Power Steering Adapter Plates Thanks for the compliments Ron I appreciate the purchase. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

12-23-2014, 01:34 AM	#486
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Power Steering Adapter Plates I have a 68 k10 without a dippled frame. Can you sent me a pm on the brackets needed to add power steering? Thanks Scott __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

12-24-2014, 12:29 AM	#487
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Power Steering Adapter Plates PM sent __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-03-2015, 03:13 PM	#488
_mg Active Member Join Date: Jul 2013 Location: Southeast MI Posts: 195	Re: Power Steering Adapter Plates I have a '64 K10, picked up a '87 power steering box and pump from a k20. Need the adapter plate and tube and flange. PM with the details please. Thanks!

01-04-2015, 12:22 AM	#489
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Power Steering Adapter Plates I'll send you a PM __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-16-2015, 04:39 PM	#490
w00dst0ck Registered User Join Date: Jul 2013 Location: Austin, Texas Posts: 349	Re: Power Steering Adapter Plates Thread diameter/pitch for '72 power steering box? It's a masterpro, but Oreilly's doesn't list that information. Adapting to a GEN 3 5.3.

02-17-2015, 05:29 AM	#492
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: Power Steering Adapter Plates I'd like to find 3" trailing arm perches. __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

02-17-2015, 11:00 AM	#494
w00dst0ck Registered User Join Date: Jul 2013 Location: Austin, Texas Posts: 349	Re: Power Steering Adapter Plates Line fittings on gearbox*

02-17-2015, 11:25 AM	#497
w00dst0ck Registered User Join Date: Jul 2013 Location: Austin, Texas Posts: 349	Re: Power Steering Adapter Plates FYI guys buying boxes from Oreilly's. I got one yesterday for a '72 and the mounting threads are 3/8-16.



Register or Log In To remove these advertisements.

02-18-2015, 12:11 AM	#499
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Power Steering Adapter Plates I checked a original '71 C20 steering box as well as a few 80's steering boxes and all have 7/16"-14 threads. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-18-2015, 10:48 AM	#500
w00dst0ck Registered User Join Date: Jul 2013 Location: Austin, Texas Posts: 349	Re: Power Steering Adapter Plates I exchanged it and my new one is 7/16-14 as well.

Register or Log In To remove these advertisements.