What did you do to your truck today? - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*LILRED66* · 12-22-2009, 10:04 AM

We did some rearranging...to make room for more trucks inside the fence, we had a 40' container delivered and set, to put sheetmetal items out of the weather.

70 Suburban · 12-22-2009, 10:15 AM

Thats a-maze-ing

joe231 · 12-22-2009, 10:52 AM

Quote:

Originally Posted by ruffrida2005

Anyone want a 750 Holley, never had gas in it!

freebie?
that is awful nice of you
I'll take it if you pay shipping also

70 Suburban · 12-22-2009, 11:07 AM

I know i need onw.. the ear on my 750 dbl pump just broke off. The carb is great but the base is screwd.

**nbrfd007** · 12-22-2009, 11:39 AM

Put a master/clutch cylinder on it. Getting ready for swapping the carb to a 500 holley on my 305 V6.
Tim

NF65Fleetside · 12-22-2009, 08:48 PM

I freak'n broke my turn signal switch! guh now one more thing I gotta pickup from the shop when I go get some other items. =(

ruffrida2005 · 12-23-2009, 04:52 AM

Well i looked at my frame again, it's not doing any tricks like I thought. I got my rebuild kit in for my Demon, it cost me free dollars.

The 750 is for sell $250, never had gas in it. only set on the intake!

63deluxfleet · 12-23-2009, 09:36 PM

Filled her up...hopefully not for the last time, but probably if insurance don't pay for my hit and run total....
Took a long drive and tried to enjoy her a lil...

ravens65 · 12-23-2009, 10:38 PM

work on the wiring again today pita , why did they call it e-z wiring ????

ravens65 · 12-23-2009, 10:44 PM

your braver then I am!!!!

ravens65 · 12-23-2009, 10:48 PM

Quote:

Originally Posted by scotts62

Put my trans on the work table, going to attempt my first rebuild

your braver then I am!

Byronic · 12-23-2009, 10:50 PM

I received my 63 shop manual and the factory assembly manual. Bedtime stories for me for a long time.

jgh64pkup · 12-24-2009, 12:35 AM

Quote:

Originally Posted by ERIC BUFFARD

work on the wiring again today pita , why did they call it e-z wiring ????

they are ez

if a 15 year old can install one in a few days im sure you can

Vernski · 12-24-2009, 01:05 AM

Quote:

Originally Posted by jgh64pkup

they are ez

if a 15 year old can install one in a few days im sure you can

Gage it's not easy for older guys to stand on there heads an do wiring under the dash. I'm ok if I take my time and I've taken my blood pressure pills.I'm speaking of myself only.

---Vernski

jgh64pkup · 12-24-2009, 01:07 AM

sams60gmc · 12-24-2009, 02:57 AM

Today I started the day off working on my poly bushing sleves. I made them out of solid stock because I couldn't find any tube and I'm that cheap!! Then I built a new cross member because I wasn't happy with the way my old one was fitting and we screwed up some how and it ended up being way too high. I forgot to compensate for the 4'' tubing that it would be notched into. Anyways I built a new one out of 2x3 tubing and welded that up and removed the temporary support for up front. I also made some bag mounts. Next week I'll make my lower bag mounts and start setting up my links. Anyways pics!

ravens65 · 12-24-2009, 09:11 AM

thats no average 15yr old to do his own wiring!! most of them are to busy w/ video games to learn this stuff!! its not as hard as I thought, just seems overwelming @ first

glendale · 12-24-2009, 08:03 PM

painted a door and installed my door panel.

*lakeroadster* · 12-24-2009, 08:11 PM

Extended the '67 Camaro dash by 5" that is going into my 65 SWB SS. More pictures and tech. data in my build thread, listed below.

truckdrivinsob · 12-24-2009, 09:50 PM

Got the motor pretty much buttoned up. Ran fuel lines made battery cables. Hopefully fire her up tomorrow ! Then on to plumbing the compressor and valves. Then mount bags.

Rich 5150 69 · 12-25-2009, 12:40 PM

Had to drop in a new HEI, the old one died last Friday, 3-miles from the house after a 250 mile trip, got towed the last three, the old HEI was `77 vintage all original, I would have rebuilt it but the centrifigal advance was rusted up tight, coild not get it apart. Kinda wondered why the last few months it wasn`t quite right....

*lakeroadster* · 12-26-2009, 05:57 PM

Added sheet metal to the strectched'67 Camaro dash that's going into my 65 C10.

shortbed70 · 12-26-2009, 06:29 PM

Looked at it while warming up from shoveling snow for the forth time this yr. Wouldnt be bad but the wind likes to blow right up against my garage and I cant get out of the driveway...

monolith · 12-26-2009, 08:40 PM

Seafoamed both running trucks(the 64 and the 66) Picked up a '60 hood and bench seat.

brandon283 · 12-26-2009, 09:34 PM

got the whole roof off my cab, and the roof panel peeled off the donor cab, next week should have the new roof on my cab

12-22-2009, 10:04 AM	#476
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: What did you do to your truck today? We did some rearranging...to make room for more trucks inside the fence, we had a 40' container delivered and set, to put sheetmetal items out of the weather. Attached Images Last edited by LILRED66; 12-22-2009 at 10:06 AM.

12-22-2009, 10:15 AM	#477
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: What did you do to your truck today? Thats a-maze-ing __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

12-22-2009, 11:07 AM	#479
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: What did you do to your truck today? I know i need onw.. the ear on my 750 dbl pump just broke off. The carb is great but the base is screwd. __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

12-22-2009, 11:39 AM	#480
nbrfd007 Senior Member Join Date: Nov 2007 Location: New Blaine, Arkansas Posts: 751	Re: What did you do to your truck today? Put a master/clutch cylinder on it. Getting ready for swapping the carb to a 500 holley on my 305 V6. Tim

12-22-2009, 08:48 PM	#481
NF65Fleetside Registered User Join Date: Feb 2007 Location: Los Angeles Posts: 674	Re: What did you do to your truck today? I freak'n broke my turn signal switch! guh now one more thing I gotta pickup from the shop when I go get some other items. =(

12-23-2009, 04:52 AM	#482
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: What did you do to your truck today? Well i looked at my frame again, it's not doing any tricks like I thought. I got my rebuild kit in for my Demon, it cost me free dollars. The 750 is for sell $250, never had gas in it. only set on the intake! __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

12-23-2009, 09:36 PM	#483
63deluxfleet Registered User Join Date: Jun 2009 Location: dinuba, ca Posts: 623	Re: What did you do to your truck today? Filled her up...hopefully not for the last time, but probably if insurance don't pay for my hit and run total.... Took a long drive and tried to enjoy her a lil... Attached Images __________________ A girl phoned me the other day and said... Come on over, there's nobody home. I went over. Nobody was home. -Rodney Dangerfield .......THE ROAD TO HELL IS PAVED WITH GOOD INTENTIONS.....

12-23-2009, 10:38 PM	#484
ravens65 Registered User Join Date: Dec 2009 Location: clermont florida Posts: 176	Re: What did you do to your truck today? work on the wiring again today pita , why did they call it e-z wiring ???? Attached Images

12-23-2009, 10:44 PM	#485
ravens65 Registered User Join Date: Dec 2009 Location: clermont florida Posts: 176	Re: What did you do to your truck today? your braver then I am!!!!

12-23-2009, 10:50 PM	#487
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Re: What did you do to your truck today? I received my 63 shop manual and the factory assembly manual. Bedtime stories for me for a long time. __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed

12-24-2009, 01:07 AM	#490
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: What did you do to your truck today? __________________ Gage 1967 C10 Shortbed Stepside

12-24-2009, 02:57 AM	#491
sams60gmc Registered User Join Date: Sep 2008 Location: Vancouver Washington Posts: 726	Re: What did you do to your truck today? Today I started the day off working on my poly bushing sleves. I made them out of solid stock because I couldn't find any tube and I'm that cheap!! Then I built a new cross member because I wasn't happy with the way my old one was fitting and we screwed up some how and it ended up being way too high. I forgot to compensate for the 4'' tubing that it would be notched into. Anyways I built a new one out of 2x3 tubing and welded that up and removed the temporary support for up front. I also made some bag mounts. Next week I'll make my lower bag mounts and start setting up my links. Anyways pics! Attached Images __________________ 1960 GMC short fleet, full frame build... http://67-72chevytrucks.com/vboard/s...d.php?t=329718

12-24-2009, 09:11 AM	#492
ravens65 Registered User Join Date: Dec 2009 Location: clermont florida Posts: 176	Re: What did you do to your truck today? thats no average 15yr old to do his own wiring!! most of them are to busy w/ video games to learn this stuff!! its not as hard as I thought, just seems overwelming @ first Last edited by ravens65; 12-24-2009 at 09:12 AM.

12-24-2009, 08:03 PM	#493
glendale Registered User Join Date: Jul 2009 Location: sacramento,ca Posts: 338	Re: What did you do to your truck today? painted a door and installed my door panel.

12-24-2009, 08:11 PM	#494
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: What did you do to your truck today? Extended the '67 Camaro dash by 5" that is going into my 65 SWB SS. More pictures and tech. data in my build thread, listed below. Attached Images Last edited by lakeroadster; 12-24-2009 at 08:12 PM.



Register or Log In To remove these advertisements.

12-24-2009, 09:50 PM	#495
truckdrivinsob Gear Jammer Join Date: May 2007 Location: Myrtle creek OR Posts: 221	Re: What did you do to your truck today? Got the motor pretty much buttoned up. Ran fuel lines made battery cables. Hopefully fire her up tomorrow ! Then on to plumbing the compressor and valves. Then mount bags.

12-25-2009, 12:40 PM	#496
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: What did you do to your truck today? Had to drop in a new HEI, the old one died last Friday, 3-miles from the house after a 250 mile trip, got towed the last three, the old HEI was `77 vintage all original, I would have rebuilt it but the centrifigal advance was rusted up tight, coild not get it apart. Kinda wondered why the last few months it wasn`t quite right.... __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

12-26-2009, 05:57 PM	#497
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: What did you do to your truck today? Added sheet metal to the strectched'67 Camaro dash that's going into my 65 C10. Attached Images Last edited by lakeroadster; 12-26-2009 at 05:58 PM.

12-26-2009, 06:29 PM	#498
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: What did you do to your truck today? Looked at it while warming up from shoveling snow for the forth time this yr. Wouldnt be bad but the wind likes to blow right up against my garage and I cant get out of the driveway... __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

12-26-2009, 08:40 PM	#499
monolith Zero Albedo Join Date: Mar 2009 Location: San Gabriel, California Posts: 478	Re: What did you do to your truck today? Seafoamed both running trucks(the 64 and the 66) Picked up a '60 hood and bench seat. __________________ Baz "Deserve's got nothin' to do with it." 66 GMC 1500 wideside longbed 250 4spd "Project Rekker"http://67-72chevytrucks.com/vboard/s...d.php?t=467467 65 GMC 1Ton Panelhttp://67-72chevytrucks.com/vboard/s...32#post4794432 65 Chevy Panel (former U.S.Navy truck) 64 Chevy Suburban Carryall 4x4http://67-72chevytrucks.com/vboard/s...d.php?t=358348 64 GMC 1000 wideside longbed 305 4spdhttp://67-72chevytrucks.com/vboard/s....php?p=3600890(Rip- parts truck now) 68 Dodge Charger

12-26-2009, 09:34 PM	#500
brandon283 Registered User Join Date: Dec 2009 Location: winnipeg, manitoba Posts: 46	Re: What did you do to your truck today? got the whole roof off my cab, and the roof panel peeled off the donor cab, next week should have the new roof on my cab

Register or Log In To remove these advertisements.