68 Burb... here we go!! - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 07-07-2013, 10:07 AM

Looking good! I like the texture. Do you know what Bob used?
Posted via Mobile Device

C10_ustacould · 07-07-2013, 10:15 AM

Nice progress, did you figure out which holes you need to keep for the go pedal?

jmedero · 07-07-2013, 11:29 AM

I'm a kit 90% sure I'm doing it.
Posted via Mobile Device

jmedero · 07-08-2013, 01:05 AM

Rob he used the raptor liner kit I will be ordering it this week.

Buck I did thanks. I realized I have a pedal set up for a 90's truck. I think I might be missing a part or two. Should just order the lokar setup. It's nice.
Posted via Mobile Device

jmedero · 07-21-2013, 12:09 AM

Decided to get off my butt and stop watching other build their trucks. Welded up some more of the fire wall and started to do my most favorite thing in the world..... Body work. Amazing how much sand paper you go through so fast. Need to stock up.

Posted via Mobile Device

C10_ustacould · 07-21-2013, 12:21 AM

Nice!
Posted via Mobile Device

raull · 07-21-2013, 08:18 PM

Looking good !!!!!
Posted via Mobile Device

jmedero · 07-21-2013, 08:39 PM

Thanks. The top of the drip rail that runs from side to side on the fire wall. How straight should that be? It has a natural frontward slope to it. As of right now it's a thin coat of filler to level it off. Should I be making that lip flat with no forward slope?
Posted via Mobile Device

jmedero · 08-18-2013, 10:38 PM

Working on a slight detour here.... Just doing research on a couple of diff options for a brake upgrade. Got a call Saturday and my motor for the Burb is done!!! Woohoo. He also told me my Nova motor will be done tomorrow. I guess I better get busy here I'm running out of room in the corners of the shop. I guess these are good problems to have.
Posted via Mobile Device

c10seconds · 09-11-2013, 06:03 AM

I still have these wilwoods. Did you find out if scotts kit works with a cpp spindle and hub?

Scottshotrods · 09-11-2013, 10:11 AM

Quote:

Originally Posted by c10seconds

I still have these wilwoods. Did you find out if scotts kit works with a cpp spindle and hub?

On our bolt in ifs for the c-10 trucks.

1.We have one that uses a mustang II spindals

2.We have one that uses a c-10 spindal

On Juans set up the upper and lower a-arms will have to be changed to our a-arms that have the c-10 ball joints in them

Justin

jmedero · 12-05-2013, 10:52 PM

The guys at Scott's throwing down and making my custom trans mount with drop out center section can't wait to get it at the house.... Come on UPS.

jmedero · 03-11-2014, 07:46 PM

It has been a long time on any updates. My motor and tranny are done and I picked them up today. I'll be painting all the brackets and accessories black. I'm not find of the tranny color so it will prob be black soon. Time to get this project back on track.

jmedero · 03-11-2014, 08:11 PM

Now I need to find one of these.

likaroc13 · 03-11-2014, 10:49 PM

Git r' done Juan! Good to see an update. Congrats on getting the motor & tranny back. Looks nice! Hope things in P'cola are going good.

jmedero · 03-11-2014, 11:44 PM

Thanks Phillip. How's it going man? Pcola is good man. Working like a mad man, but that's a good thing when you sign your own check. Lol

likaroc13 · 03-12-2014, 04:17 PM

Quote:

Originally Posted by jmedero

Thanks Phillip. How's it going man? Pcola is good man. Working like a mad man, but that's a good thing when you sign your own check. Lol

Glad to hear business is good! I'm sure it's about to really pick up for you. I know I'm glad to have nicer (consistently) weather rolling around. Things are pretty good here.

jmedero · 03-12-2014, 05:22 PM

Glad I don't have all that winter weather anymore to deal with. How's black Betty?

likaroc13 · 03-12-2014, 05:44 PM

Quote:

Originally Posted by jmedero

Glad I don't have all that winter weather anymore to deal with. How's black Betty?

Yeah, we actually had a bit of a Winter this year. Not so much last year. We had that ice/snow front that came through in early Feb., which was not very typical for the area. Can't complain too much though, because lots of folks have been hammered with Winter this year.

Black Betty is resting comfortably. Hope I can get my dad going on it again soon. It would be nice to get her on the road this year!

jmedero · 03-12-2014, 10:21 PM

Nahhh just give me the Address where she is and I'll pick get up. And put a stack of $5 bills in her place.

likaroc13 · 03-13-2014, 11:01 AM

Quote:

Originally Posted by jmedero

Nahhh just give me the Address where she is and I'll pick get up. And put a stack of $5 bills in her place.

Sounds like a plan...

NOT!!!

justpball · 01-17-2015, 10:11 AM

Hahhah^ good stuff

likaroc13 · 01-17-2015, 10:54 AM

What's up Juan? Saw a Facebook post recently with pics of a recent detail job. Keep up the good work. If I can get it worked out, I might have some detail work for you once the weather warms up. Hope you guys are doing well. Lot of changes for us the past few months.

jmedero · 01-17-2015, 09:44 PM

Sweet man let me know.
How's my truck doing? Lol

jmedero · 01-17-2015, 09:45 PM

Well I have not updated this thread in a while. I've actually been working on the truck and making a lot of headway. I'll post up some pics here soon.

07-07-2013, 10:07 AM	#476
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 68 Burb... here we go!! Looking good! I like the texture. Do you know what Bob used? Posted via Mobile Device __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 07-07-2013 at 10:21 AM.

07-07-2013, 10:15 AM	#477
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: 68 Burb... here we go!! Nice progress, did you figure out which holes you need to keep for the go pedal? __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

07-07-2013, 11:29 AM	#478
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! I'm a kit 90% sure I'm doing it. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

07-08-2013, 01:05 AM	#479
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Rob he used the raptor liner kit I will be ordering it this week. Buck I did thanks. I realized I have a pedal set up for a 90's truck. I think I might be missing a part or two. Should just order the lokar setup. It's nice. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

07-21-2013, 12:09 AM	#480
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Decided to get off my butt and stop watching other build their trucks. Welded up some more of the fire wall and started to do my most favorite thing in the world..... Body work. Amazing how much sand paper you go through so fast. Need to stock up. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

07-21-2013, 12:21 AM	#481
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: 68 Burb... here we go!! Nice! Posted via Mobile Device __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

07-21-2013, 08:18 PM	#482
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 68 Burb... here we go!! Looking good !!!!! Posted via Mobile Device __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

07-21-2013, 08:39 PM	#483
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Thanks. The top of the drip rail that runs from side to side on the fire wall. How straight should that be? It has a natural frontward slope to it. As of right now it's a thin coat of filler to level it off. Should I be making that lip flat with no forward slope? Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

08-18-2013, 10:38 PM	#484
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Working on a slight detour here.... Just doing research on a couple of diff options for a brake upgrade. Got a call Saturday and my motor for the Burb is done!!! Woohoo. He also told me my Nova motor will be done tomorrow. I guess I better get busy here I'm running out of room in the corners of the shop. I guess these are good problems to have. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

09-11-2013, 06:03 AM	#485
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: 68 Burb... here we go!! I still have these wilwoods. Did you find out if scotts kit works with a cpp spindle and hub? Attached Images

12-05-2013, 10:52 PM	#487
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! The guys at Scott's throwing down and making my custom trans mount with drop out center section can't wait to get it at the house.... Come on UPS. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

03-11-2014, 07:46 PM	#488
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! It has been a long time on any updates. My motor and tranny are done and I picked them up today. I'll be painting all the brackets and accessories black. I'm not find of the tranny color so it will prob be black soon. Time to get this project back on track. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

03-11-2014, 08:11 PM	#489
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Now I need to find one of these. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

03-11-2014, 10:49 PM	#490
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: 68 Burb... here we go!! Git r' done Juan! Good to see an update. Congrats on getting the motor & tranny back. Looks nice! Hope things in P'cola are going good. __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

03-11-2014, 11:44 PM	#491
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Thanks Phillip. How's it going man? Pcola is good man. Working like a mad man, but that's a good thing when you sign your own check. Lol __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084



Register or Log In To remove these advertisements.

03-12-2014, 05:22 PM	#493
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Glad I don't have all that winter weather anymore to deal with. How's black Betty? __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

03-12-2014, 10:21 PM	#495
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Nahhh just give me the Address where she is and I'll pick get up. And put a stack of $5 bills in her place. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-17-2015, 10:11 AM	#497
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 68 Burb... here we go!! Hahhah^ good stuff __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

01-17-2015, 10:54 AM	#498
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: 68 Burb... here we go!! What's up Juan? Saw a Facebook post recently with pics of a recent detail job. Keep up the good work. If I can get it worked out, I might have some detail work for you once the weather warms up. Hope you guys are doing well. Lot of changes for us the past few months. __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

01-17-2015, 09:44 PM	#499
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Sweet man let me know. How's my truck doing? Lol __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-17-2015, 09:45 PM	#500
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Well I have not updated this thread in a while. I've actually been working on the truck and making a lot of headway. I'll post up some pics here soon. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

Register or Log In To remove these advertisements.