Project: 1972 K30 Crew Cab Duramax - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71blksuper4x4** · 04-25-2019, 10:32 PM

Roughly 106”

cashforclunkers · 04-26-2019, 09:15 AM

Quote:

Originally Posted by 71blksuper4x4

Roughly 106”

Thank you sir.

**71blksuper4x4** · 04-27-2019, 10:08 PM

Building my turnover ball gooseneck hitch. Still have some work to do, but a very productive Fab day.

**71blksuper4x4** · 04-28-2019, 10:27 PM

Finished the fabrication on my gooseneck hitch. Will need to blast and clean it up.

7dee2 · 04-29-2019, 10:54 AM

Really like the wheel and tire combo Trevor! Nice job on the hitch and receiver looks good.

**71blksuper4x4** · 04-29-2019, 09:16 PM

Quote:

Originally Posted by 7dee2

Really like the wheel and tire combo Trevor! Nice job on the hitch and receiver looks good.

Thanks Brett, good hearing from you.

**rgreathouse** · 04-29-2019, 09:56 PM

Trevor looking good!

Ive got a couple goosenecks I'm going to play with for my truck. Is this going to bolt to the top of the frame? looks similar to the b&w 73-87 chevy gooseneck?

**71blksuper4x4** · 04-29-2019, 09:58 PM

Quote:

Originally Posted by rgreathouse

Trevor looking good!

Ive got a couple goosenecks I'm going to play with for my truck. Is this going to bolt to the top of the frame? looks similar to the b&w 73-87 chevy gooseneck?

That’s what I copied but made it to fit my chassis, it will bolt on top of the rails under the bed floor.

**rgreathouse** · 04-29-2019, 10:01 PM

what did you start with? I was thinking about buying a 73-87 b&w and trying it on mine.I was thinking it may work for me since my frame doesn't kick up as far as yours, but not sure about width.

**71blksuper4x4** · 04-29-2019, 10:18 PM

I started with the B&W 1500 for flat bed kit, was around $150. Then I had this old 8” C Channel front bumper from my CJ10a Jeep that was a perfect starting mount.

**rgreathouse** · 04-29-2019, 10:22 PM

oh ok makes sense, you must have removed the square top plate that comes with the flatbed kit?

**71blksuper4x4** · 05-01-2019, 08:11 PM

Quote:

Originally Posted by rgreathouse

oh ok makes sense, you must have removed the square top plate that comes with the flatbed kit?

Yes, that was one of the most time consuming things on the fabrication was cutting that 1/2” thick plate off.

Vintage Windmills · 05-03-2019, 09:24 PM

Looking good. I'm curious about the powerplant. Have you shown the engine yet? I know you said lB7 Do you have one ready for the truck?

**71blksuper4x4** · 05-03-2019, 10:21 PM

Quote:

Originally Posted by Vintage Windmills

Looking good. I'm curious about the powerplant. Have you shown the engine yet? I know you said lB7 Do you have one ready for the truck?

The engine is still in my donor truck currently where I can still run the fluids through and keep it rolling. I have been preparing the rear of the frame and am close to working on the front half. I plan on getting a Fass pump and a set of SAC injectors but it has had great maintenance it's whole life. I will detail it when it's time.

7dee2 · 05-20-2019, 10:24 AM

Nice! Reminds me of our doner 3+3 chop top convertible buggy.

roundhouse · 05-21-2019, 07:23 PM

Quote:

Originally Posted by Bones72Super

Could you tell what supplier you got these wheels from? I have 16.5 Slots onmy truck but tires are not available unless you want Super Swampers and I dont. I have found 2 of the 17x10 Slots but was hoping to find all 4 for sale.Any help would be awesome, I love Slots and want to run them on my K2500

summit has them
https://www.summitracing.com/parts/u...8245/overview/
also a couple sellers on ebay have them
and the ebay seller told me in an email they could get em with blank centers so you could machine whatever bolt battern and hub size you wnted.

roundhouse · 05-21-2019, 07:24 PM

wow!

nice work on the CC conversion

**71blksuper4x4** · 05-21-2019, 08:52 PM

Quote:

Originally Posted by roundhouse

wow!

nice work on the CC conversion

Thank you.

**71blksuper4x4** · 06-11-2019, 08:03 AM

I punted the idea of multiple headliners, it just wasn't coming together how I wanted them to. Reverted back to my original plan, one I had seen executed by another member. Added a 2nd dome light for seeing in the console.
Big question, where should I place my cargo lamp switch? Dash, B-Pillar, etc. It's no longer convenient to have under the rear dome light.

**71blksuper4x4** · 06-11-2019, 08:13 AM

I have to finish welding on the inner roof, but will also need to wire in my electrical (Clearance lamps, dome lights, cargo lamp) before the outer skin goes on for it's last time.

1972K20 · 06-11-2019, 02:52 PM

Looks good!

**71blksuper4x4** · 06-30-2019, 11:02 PM

Well, found out I was 1/4" long on my floor on the driver's side, spent all weekend fixing that and getting back to the inner roof where I thought I was at ahead of the weekend.

**Getter-Done** · 07-01-2019, 01:46 PM

I like the inner roof
with dome light in the
center.
Looking good.

.

**71blksuper4x4** · 03-25-2020, 10:23 AM

More of my inner roof coming together.

**71blksuper4x4** · 03-25-2020, 10:25 AM

Adjusted my upper door gaps.

04-25-2019, 10:32 PM	#476
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Project: 1972 K30 Crew Cab Duramax Roughly 106” __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-27-2019, 10:08 PM	#478
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Project: 1972 K30 Crew Cab Duramax Building my turnover ball gooseneck hitch. Still have some work to do, but a very productive Fab day. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-28-2019, 10:27 PM	#479
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Project: 1972 K30 Crew Cab Duramax Finished the fabrication on my gooseneck hitch. Will need to blast and clean it up. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-29-2019, 10:54 AM	#480
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,990	Re: Project: 1972 K30 Crew Cab Duramax Really like the wheel and tire combo Trevor! Nice job on the hitch and receiver looks good. __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

04-29-2019, 09:56 PM	#482
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 494	Re: Project: 1972 K30 Crew Cab Duramax Trevor looking good! Ive got a couple goosenecks I'm going to play with for my truck. Is this going to bolt to the top of the frame? looks similar to the b&w 73-87 chevy gooseneck? __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791

04-29-2019, 10:01 PM	#484
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 494	Re: Project: 1972 K30 Crew Cab Duramax what did you start with? I was thinking about buying a 73-87 b&w and trying it on mine.I was thinking it may work for me since my frame doesn't kick up as far as yours, but not sure about width. __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791

04-29-2019, 10:18 PM	#485
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Project: 1972 K30 Crew Cab Duramax I started with the B&W 1500 for flat bed kit, was around $150. Then I had this old 8” C Channel front bumper from my CJ10a Jeep that was a perfect starting mount. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever Last edited by 71blksuper4x4; 04-29-2019 at 10:25 PM.

04-29-2019, 10:22 PM	#486
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 494	Re: Project: 1972 K30 Crew Cab Duramax oh ok makes sense, you must have removed the square top plate that comes with the flatbed kit? __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791

05-03-2019, 09:24 PM	#488
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Project: 1972 K30 Crew Cab Duramax Looking good. I'm curious about the powerplant. Have you shown the engine yet? I know you said lB7 Do you have one ready for the truck? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-20-2019, 10:24 AM	#490
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,990	Re: Project: 1972 K30 Crew Cab Duramax Nice! Reminds me of our doner 3+3 chop top convertible buggy. __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

05-21-2019, 07:24 PM	#492
roundhouse Registered User Join Date: Apr 2014 Location: atlanta ga Posts: 91	Re: Project: 1972 K30 Crew Cab Duramax wow! nice work on the CC conversion

06-11-2019, 08:03 AM	#494
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Project: 1972 K30 Crew Cab Duramax I punted the idea of multiple headliners, it just wasn't coming together how I wanted them to. Reverted back to my original plan, one I had seen executed by another member. Added a 2nd dome light for seeing in the console. Big question, where should I place my cargo lamp switch? Dash, B-Pillar, etc. It's no longer convenient to have under the rear dome light. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

06-11-2019, 08:13 AM	#495
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Project: 1972 K30 Crew Cab Duramax I have to finish welding on the inner roof, but will also need to wire in my electrical (Clearance lamps, dome lights, cargo lamp) before the outer skin goes on for it's last time. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

06-11-2019, 02:52 PM	#496
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Re: Project: 1972 K30 Crew Cab Duramax Looks good!

06-30-2019, 11:02 PM	#497
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Project: 1972 K30 Crew Cab Duramax Well, found out I was 1/4" long on my floor on the driver's side, spent all weekend fixing that and getting back to the inner roof where I thought I was at ahead of the weekend. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever



Register or Log In To remove these advertisements.

07-01-2019, 01:46 PM	#498
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,429	Re: Project: 1972 K30 Crew Cab Duramax I like the inner roof with dome light in the center. Looking good. . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

03-25-2020, 10:23 AM	#499
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Project: 1972 K30 Crew Cab Duramax More of my inner roof coming together. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

03-25-2020, 10:25 AM	#500
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Project: 1972 K30 Crew Cab Duramax Adjusted my upper door gaps. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

Register or Log In To remove these advertisements.