What did you do to your truck today!

[BarryB]

Well isn't what I did today, but its part of the project I've been working on when I get time. Here is my attempt at repairing where a sunroof was installed. Sorry but didn't think to get a pic of the top before I started.

[willys72fleetside]

I buffed and installed my cargo light and it even works.

[shawno72]

Painted my door panels and arm rests black to complete my black interior. I think they turned out really good but later I will buy some real black one.




Posted via Mobile Device

[71K20chevy]

Originally Posted by shawno72

Painted my door panels and arm rests black to complete my black interior. I think they turned out really good but later I will buy some real black one.

That turned out great! I have the same color truck and I'm doing almost the exact same with my interior. What paint did you use on the panels?



On another note, we got the rear brakes done today.

[shawno72]

Originally Posted by 71K20chevy

That turned out great! I have the same color truck and I'm doing almost the exact same with my interior. What paint did you use on the panels?
.

Thank you. I used Dupli-color vinyl and fabrics gloss black. It covered well, just do it in about three costs and it will turn out nice.
Posted via Mobile Device

[fatgump]

Washed the truck today

[JVictor75]

C

Originally Posted by fatgump

Washed the truck today

So you're why it rained this evening!

Installed new rear coils (5" drop) along with 2degree pinion shims, shock relocators, drop shocks and my new to me 15x10 powdercoated rallies. Get to readjust the coil on the left trailing arm because it isn't sitting right, causing the left side of the frame to sit about an inch higher than the right.

Found out that my new TransDapt 12 bolt finned aluminum extra capacity differential cover won't work the stock location panhard rod. Even when using the fancy dancy adjustable one from CPP.

Went to the hardware store more for more effing bolts.

Also finished installing my NoLimit rack and pinion.

[jc70chevy]

[QUOTE=shawno72;5785963]Painted my door panels and arm rests black to complete my black interior. I think they turned out really good but later I will buy some real black one.




Posted via Mobile Device[/QUOTE


hey bro it looks great i have a dumb question whats the metal bracket the the door panel slide in to on the top called i need to buy two my truck doesnt have them

[shawno72]

[quote=jc70chevy;5786897]

Originally Posted by shawno72

Painted my door panels and arm rests black to complete my black interior. I think they turned out really good but later I will buy some real black one.




Posted via Mobile Device[/QUOTE


hey bro it looks great i have a dumb question whats the metal bracket the the door panel slide in to on the top called i need to buy two my truck doesnt have them

That's a good question. My father in law got a set a while bang from pick n pull. You could always pay the $25 here for a membership, turns your name blue, and then you could post a want to buy add for a set. People can be very generous here when you post want to buy adds for smaller items like that. My $25 subscription has paid for itself many times over that way. If I had an extra set I'd say come get them, since your fairly close
Posted via Mobile Device

[ScottG]

I completed the TH400 to 700R4 conversion. Everything works!! All shift points are good. Need to re-bleed the brakes, a little spongy, but the Dana 60 I put in works great with that tranny!! Now, to see how much the gas mileage improves.

[denz72]

Originally Posted by ScottG

I completed the TH400 to 700R4 conversion. Everything works!! All shift points are good. Need to re-bleed the brakes, a little spongy, but the Dana 60 I put in works great with that tranny!! Now, to see how much the gas mileage improves.

Scott curious about the 700R4 that you used.. just did a conversion on my 72 from TH350 got mine from Bowtie Overdrive how does yours shift 1st to 2nd I know they are different animals TH350 to 700R4 just seems to take a while to shift from 1st to 2nd or is that normal..

[Survivalist45]

Bit of waxing, my girlfriend got me a bunch of stuff from LMC that I will be posting in the future.

I also have a bucket seat/ megashifter conversion coming!

Oh, does anyone know what it would take to convert my marker lights to the ones on the red C10 above me?

[jayman68]

Originally Posted by Survivalist45

Oh, does anyone know what it would take to convert my marker lights to the ones on the red C10 above me?

Just get some deluxe marker lights like these,

http://www.1aauto.com/1A/HeadLights/...PP00345/446677

Or from Ebay,

http://www.ebay.com/itm/68-72-Chevy-...d1ccc2&vxp=mtr

LMC has them also

http://www.lmctruck.com/icatalog/cb/full.aspx?Page=71

http://www.lmctruck.com/icatalog/cb/full.aspx?Page=163

I found some clear ones, but I don't know if they are legal for street use.

Then just take yours out and put the new ones in.
You may want to get bulb holders and wire them in(my ones like you have were not lighted), you can find those at local parts store.

[69GWC]

Parked mine in the shop, spose to get snow tomorrow. pullled the drive shaft and am going to have it balanced and 2 new u-joints installed this week.
Posted via Mobile Device

[Rollie396]

Took a break from fixing what the last bodyman hacked up and put in the PB hood hinges.

[mcmlxix]

Installed a rear crossmember, the proceeded to drop the fuel tank off a 5 foot stand (truck was on the lift at the time) and destroyed a $250 OEM GM fuel pump module....

now accepting donations....

[jc70chevy]

ill check pnp thanks i will have to look into membership.

[grancuda]

Drove it to work, 18 deg @ 5am and the 3 on the tree was a little stiff but it did good.

[GCncsuHD]

I didn't do anything to the truck, but my great uncle recently passed away so we were going through some old stuff to find some old photos for the memorial. I found a box of my great grandfather's stuff, and found the original leather key fob from dealership where he bought my 67 brand new, it's worn and you can barely read the lettering anymore, but that just means he carried it for a long time, which means a lot to me! It's now back in it's rightful place on the keys to my 67.



I also found a picture of my mother, at age 10, and my great grandmother standing beside my 67 when it was brand new, but haven't gotten a chance to make a copy of it yet, still haven't found a picture of my great grandfather with the truck yet though.

[Dale_Brown]

Picked up my 1972 short bed 4X4. It needs all the things a neglected 72 would need.

But as for now it’s at least a driver.

Since I am now single, Im going to spend Christmas $$$ I saved on this old girl.

[Square_78]

Polished up and repainted my GMC fender emblems and 8-350 emblems. Lookin good now.

[c10monkey]

I thought I would replace the exhaust donut on the passenger side. Broke two of the studs. So I removed the exhaust manifold to fix. All of those bolts came out ok but no two where the same. Also appears that the previous owner didnt install a donut gasket or manifold gaskets.... yay?
Posted via Mobile Device

[midniteblues]

got it back too roller status this past week. I still need to blast n paint all the cab/rad mounting brackets. i allready started running the brake lines.
oh the poor neglected forgotten about pontiac sadly waits as its gonna pass over the motor and trans too the truck very soon

[Tshort1]

Just finished building my all metal console. Just needs body work and paint.

[hotsy]

today i started my project 71, pulled out the old 350 and sold it to fund the build,and started to tear the body down to access the rust. long way to go but worth the pain