Post pics. Lets see how many 60-66 4x4 are out there. - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dsuper5 · 09-27-2014, 02:07 AM

Archbennett · 11-01-2014, 08:58 PM

Wee got the idea my wife if too short to get into truck

Archbennett · 11-01-2014, 09:00 PM

Made it with a little camber to go away from door

Jimal · 12-17-2014, 04:46 PM

My '65 K10. 400 small block and a 4-speed. 90% new brakes (some of the hard lines are original) new charging system and a new clutch with the correct flywheel for a 400.

I'm sort of at a "pencil's down" moment, because of the weather and the holidays, but I'm still picking away at things. Once I take care of how to get gas into the rear-mounted tank... and finish rebuilding the parking brake system... and fabricating new front mounts for the bed, I can bolt the bed down once and for all. From there the fenders and steps should bolt right on.

Archbennett · 12-17-2014, 07:19 PM

This is on my 72 Chevy k20
Naval bronze wing nut shamrock

mattbert56 · 03-04-2015, 10:13 PM

this is my 65 k20. 292 inline 6 4 speed with Rockwell t221. Dana closed knuckle front and Eaton ho72 rear all sitting on 33 inch meats. Hope ya like it!

RANDY COX · 03-05-2015, 06:20 PM

Quote:

Originally Posted by mattbert56

this is my 65 k20. 292 inline 6 4 speed with Rockwell t221. Dana closed knuckle front and Eaton ho72 rear all sitting on 33 inch meats. Hope ya like it!

Me Likes a lot.. KOOL truck

**argonaut** · 03-05-2015, 06:46 PM

Quote:

Originally Posted by mattbert56

this is my 65 k20. 292 inline 6 4 speed with Rockwell t221. Dana closed knuckle front and Eaton ho72 rear all sitting on 33 inch meats. Hope ya like it!

Oh man! That thing is awesome! Kind of makes me wish I left mine a long bed!

mattbert56 · 03-05-2015, 07:00 PM

Quote:

Originally Posted by argonaut

Oh man! That thing is awesome! Kind of makes me wish I left mine a long bed!

Thanks Man. Iv always thought long bed 4x4s were sexy. Short beds don't do to much for me. They look funny. And reminds me of a pug.

**argonaut** · 03-05-2015, 07:18 PM

Quote:

Originally Posted by mattbert56

Thanks Man. Iv always thought long bed 4x4s were sexy. Short beds don't do to much for me. They look funny. And reminds me of a pug.

Yeah. I still like shortbeds, but I tend to actually use my truck for its intended purpose (not like those lowered 2wd guys!

) and I really wish I had the extra space of a long bead. Plus it would make it so much easier to swap in a 40 gallon FI suburban tank to feed my impending 8.1L swap.

mattbert56 · 03-05-2015, 06:38 PM

Thanks man. I like how your engine is looking. I flipped threw your build thread while back. Yours is coming along. Keep up the good work

mattbert56 · 03-05-2015, 07:30 PM

Sheesh. 8.1. I thought u were using a vortec motor. Interesting. Is it a diesel?

**argonaut** · 03-06-2015, 12:21 PM

8.1l vortec gasoline motor. Check out member DirtyLarry's squarebody 4x4. That's where I got the inspiration.

mattbert56 · 03-06-2015, 12:22 PM

I didn't know they made an 8.1. I thought it was a 5.7,5.3, and 6.0. Hm Interesting

CdM · 03-19-2015, 11:09 AM

my little 600 dollar find. I have a nice clean body for her ready to go. Love the flat bed

mattbert56 · 03-19-2015, 11:15 AM

Looks good man. What do u plan on for a motor?

CdM · 03-19-2015, 11:25 AM

I have a semi built 375 hp 350 pushing a 700r4 12 bolt rear with a posi. just need to get goin on the 3 link coilover conversion up front and she is ready to rock and roll. I cant stand leaf springs up front. Way to bouncy for me.

mattbert56 · 03-19-2015, 11:39 AM

Yea. Coils have a much smoother ride. Iv heard of guys using large ford or chevy van springs for front ends on acing trucks. Not specifically 60-66 but still. It's the concept

Bad4wd · 03-27-2015, 11:59 PM

Pick up this 1966 K-10 for 900. Been resting under a tree since 1987.

mud.man.rj · 03-28-2015, 12:03 AM

Cool 66 K10, keep us posted on it, want to see more.

**argonaut** · 03-28-2015, 02:37 AM

Ooooooo, big back window! Nice!

mattbert56 · 03-28-2015, 12:24 PM

Very nice man! And what a score for 900 bucks! Sheesh.

60sIron · 03-28-2015, 11:38 PM

Whaaaaaat, a big window 4by for $900....... Score! Good luck with your build!

Bad4wd · 04-01-2015, 12:58 AM

Bought this truck without an engine, the previous onwner swears it had a 350. Is there a way to tell if it had a 283 or a 327 from the radiator. It still has the ram horn exhaust, clutch linkage and 420 trans. Thanks, Dave...

66Gilbert · 04-07-2015, 11:58 PM

Does the cab vin plate still have the factory rosette rivets attaching it to the cab? Also does the cab vin# match the frame stamped vin#? If it is an original 4x4 and it came with a V8 engine it came with a 283.

09-27-2014, 02:07 AM	#1
Dsuper5 Registered User Join Date: Aug 2012 Location: Page AZ Posts: 131	Re: Post pics. Lets see how many 60-66 4x4 are out there.

11-01-2014, 08:58 PM	#2
Archbennett Registered User Join Date: Jan 2013 Location: Carmel valley Posts: 52	Re: Post pics. Lets see how many 60-66 4x4 are out there. Wee got the idea my wife if too short to get into truck Attached Images

11-01-2014, 09:00 PM	#3
Archbennett Registered User Join Date: Jan 2013 Location: Carmel valley Posts: 52	Re: Post pics. Lets see how many 60-66 4x4 are out there. Made it with a little camber to go away from door Attached Images

12-17-2014, 04:46 PM	#4
Jimal Registered User Join Date: Jun 2014 Location: Connecticut Posts: 521	Re: Post pics. Lets see how many 60-66 4x4 are out there. My '65 K10. 400 small block and a 4-speed. 90% new brakes (some of the hard lines are original) new charging system and a new clutch with the correct flywheel for a 400. I'm sort of at a "pencil's down" moment, because of the weather and the holidays, but I'm still picking away at things. Once I take care of how to get gas into the rear-mounted tank... and finish rebuilding the parking brake system... and fabricating new front mounts for the bed, I can bolt the bed down once and for all. From there the fenders and steps should bolt right on.

12-17-2014, 07:19 PM	#5
Archbennett Registered User Join Date: Jan 2013 Location: Carmel valley Posts: 52	Re: Post pics. Lets see how many 60-66 4x4 are out there. This is on my 72 Chevy k20 Naval bronze wing nut shamrock Attached Images

03-04-2015, 10:13 PM	#6
mattbert56 Registered User Join Date: Mar 2013 Location: Story, Wyoming Posts: 641	Re: Post pics. Lets see how many 60-66 4x4 are out there. this is my 65 k20. 292 inline 6 4 speed with Rockwell t221. Dana closed knuckle front and Eaton ho72 rear all sitting on 33 inch meats. Hope ya like it! Attached Images __________________ Well that didn't go as planned. 1965 k20 buikd thread: http://67-72chevytrucks.com/vboard/s...=628346&page=6

03-05-2015, 06:38 PM	#11
mattbert56 Registered User Join Date: Mar 2013 Location: Story, Wyoming Posts: 641	Re: Post pics. Lets see how many 60-66 4x4 are out there. Thanks man. I like how your engine is looking. I flipped threw your build thread while back. Yours is coming along. Keep up the good work __________________ Well that didn't go as planned. 1965 k20 buikd thread: http://67-72chevytrucks.com/vboard/s...=628346&page=6

03-05-2015, 07:30 PM	#12
mattbert56 Registered User Join Date: Mar 2013 Location: Story, Wyoming Posts: 641	Re: Post pics. Lets see how many 60-66 4x4 are out there. Sheesh. 8.1. I thought u were using a vortec motor. Interesting. Is it a diesel? __________________ Well that didn't go as planned. 1965 k20 buikd thread: http://67-72chevytrucks.com/vboard/s...=628346&page=6

03-06-2015, 12:21 PM	#13
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Post pics. Lets see how many 60-66 4x4 are out there. 8.1l vortec gasoline motor. Check out member DirtyLarry's squarebody 4x4. That's where I got the inspiration. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

03-06-2015, 12:22 PM	#14
mattbert56 Registered User Join Date: Mar 2013 Location: Story, Wyoming Posts: 641	Re: Post pics. Lets see how many 60-66 4x4 are out there. I didn't know they made an 8.1. I thought it was a 5.7,5.3, and 6.0. Hm Interesting __________________ Well that didn't go as planned. 1965 k20 buikd thread: http://67-72chevytrucks.com/vboard/s...=628346&page=6

03-19-2015, 11:09 AM	#15
CdM Registered User Join Date: May 2011 Location: Oceano,CA Posts: 157	Re: Post pics. Lets see how many 60-66 4x4 are out there. my little 600 dollar find. I have a nice clean body for her ready to go. Love the flat bed Attached Images __________________ Build Thread 66 custom cab lwb http://67-72chevytrucks.com/vboard/s...d.php?t=465726 66 fleet lwb- In process 64 k10 10inch lift 38.5's- In process 92k1500 400hp on 38.5-parts truck now 8(

03-19-2015, 11:15 AM	#16
mattbert56 Registered User Join Date: Mar 2013 Location: Story, Wyoming Posts: 641	Re: Post pics. Lets see how many 60-66 4x4 are out there. Looks good man. What do u plan on for a motor? __________________ Well that didn't go as planned. 1965 k20 buikd thread: http://67-72chevytrucks.com/vboard/s...=628346&page=6

03-19-2015, 11:25 AM	#17
CdM Registered User Join Date: May 2011 Location: Oceano,CA Posts: 157	Re: Post pics. Lets see how many 60-66 4x4 are out there. I have a semi built 375 hp 350 pushing a 700r4 12 bolt rear with a posi. just need to get goin on the 3 link coilover conversion up front and she is ready to rock and roll. I cant stand leaf springs up front. Way to bouncy for me. __________________ Build Thread 66 custom cab lwb http://67-72chevytrucks.com/vboard/s...d.php?t=465726 66 fleet lwb- In process 64 k10 10inch lift 38.5's- In process 92k1500 400hp on 38.5-parts truck now 8(

03-19-2015, 11:39 AM	#18
mattbert56 Registered User Join Date: Mar 2013 Location: Story, Wyoming Posts: 641	Re: Post pics. Lets see how many 60-66 4x4 are out there. Yea. Coils have a much smoother ride. Iv heard of guys using large ford or chevy van springs for front ends on acing trucks. Not specifically 60-66 but still. It's the concept __________________ Well that didn't go as planned. 1965 k20 buikd thread: http://67-72chevytrucks.com/vboard/s...=628346&page=6

03-27-2015, 11:59 PM	#19
Bad4wd Registered User Join Date: Aug 2005 Location: NOR CAL Posts: 79	Re: Post pics. Lets see how many 60-66 4x4 are out there. Pick up this 1966 K-10 for 900. Been resting under a tree since 1987. Attached Images



Register or Log In To remove these advertisements.

03-28-2015, 12:03 AM	#20
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: Post pics. Lets see how many 60-66 4x4 are out there. Cool 66 K10, keep us posted on it, want to see more. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

03-28-2015, 02:37 AM	#21
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Post pics. Lets see how many 60-66 4x4 are out there. Ooooooo, big back window! Nice! __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

03-28-2015, 12:24 PM	#22
mattbert56 Registered User Join Date: Mar 2013 Location: Story, Wyoming Posts: 641	Re: Post pics. Lets see how many 60-66 4x4 are out there. Very nice man! And what a score for 900 bucks! Sheesh. __________________ Well that didn't go as planned. 1965 k20 buikd thread: http://67-72chevytrucks.com/vboard/s...=628346&page=6

03-28-2015, 11:38 PM	#23
60sIron Registered User Join Date: Nov 2013 Location: Sebastopol California Posts: 151	Re: Post pics. Lets see how many 60-66 4x4 are out there. Whaaaaaat, a big window 4by for $900....... Score! Good luck with your build!

04-01-2015, 12:58 AM	#24
Bad4wd Registered User Join Date: Aug 2005 Location: NOR CAL Posts: 79	Re: Post pics. Lets see how many 60-66 4x4 are out there. Bought this truck without an engine, the previous onwner swears it had a 350. Is there a way to tell if it had a 283 or a 327 from the radiator. It still has the ram horn exhaust, clutch linkage and 420 trans. Thanks, Dave...

04-07-2015, 11:58 PM	#25
66Gilbert 1966 Crew Cab & 4X4 Fanatic Join Date: Dec 2005 Location: Arizona Posts: 904	Re: Post pics. Lets see how many 60-66 4x4 are out there. Does the cab vin plate still have the factory rosette rivets attaching it to the cab? Also does the cab vin# match the frame stamped vin#? If it is an original 4x4 and it came with a V8 engine it came with a 283.

Register or Log In To remove these advertisements.